i.MX fixes for 6.11:

- One imx8mp-beacon-kit change from Adam Ford to fix the broken WM8962
  audio support
- One pinctrl property typo fix for imx8mm-phygate
- One layerscape fix from Krzysztof Kozlowski to get thermal nodes
  correct name length
- A couple of imx93-tqma9352 fixes from Markus Niebel, one on CMA
  alloc-ranges and the other on SD-Card cd-gpios typo
- One change from Michal Vokáč to fix imx6dl-yapp43 LED current to match
  the HW design
- A couple of imx95 fixes from Peng Fan, one to correct a55 power
  domains and the other to correct L3Cache cache-sets
- One tqma9352 watchdog reset fix from Sascha Hauer
- One imx93 change from Shenwei Wang to fix the default value for STMMAC
  EQOS snps,clk-csr

* tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
  arm64: dts: imx95: correct L3Cache cache-sets
  arm64: dts: imx95: correct a55 power-domains
  arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
  arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
  ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
  arm64: dts: imx93: update default value for snps,clk-csr
  arm64: dts: freescale: tqma9352: Fix watchdog reset
  arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
  arm64: dts: layerscape: fix thermal node names length

Link: https://lore.kernel.org/r/ZrtsTO1+jXhJ6GSM@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

OMAP fixes for v6.11-rc

- omap3-n900: fix accelerometer orientation

* tag 'omap-for-v6.11/fixes-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
  ARM: dts: omap3-n900: correct the accelerometer orientation

Link: https://lore.kernel.org/r/7h4j7eyhyh.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

On the imx6dl-yapp4 revision based boards, the RGB LED is not driven
directly by the LP5562 driver but through FET transistors. Hence the LED
current is not determined by the driver but by the LED series resistors.

On the imx6dl-yapp43 revision based boards, we removed the FET transistors
to drive the LED directly from the LP5562 but forgot to tune the output
current to match the previous HW design.

Set the LED current on imx6dl-yapp43 based boards to the same values
measured on the imx6dl-yapp4 boards and limit the maximum current to 20mA.

Fixes: 7da4734751e0 ("ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Negate the values reported for the accelerometer z-axis in order to
match Documentation/devicetree/bindings/iio/mount-matrix.txt.

Fixes: 14a213dcb004 ("ARM: dts: n900: use iio driver for accelerometer")

Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Reviewed-By: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20240722113137.3240847-1-absicsz@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Commit 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and
regulator nodenames") renamed nodes and created 2 "clock-24000000" nodes
(at different paths).

The kernel can't handle these duplicate names even though they are at
different paths.  Fix this by renaming one of the nodes to "clock-pclk".

This name is aligned with other Arm boards (those didn't have a known
frequency to use in the node name).

Fixes: 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and regulator nodenames")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM updates from Russell King:

 - ftrace: don't assume stack frames are contiguous in memory

 - remove unused mod_inwind_map structure

 - spelling fixes

 - allow use of LD dead code/data elimination

 - fix callchain_trace() return value

 - add support for stackleak gcc plugin

 - correct some reset asm function prototypes for CFI

[ Missed the merge window because Russell forgot to push out ]

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
  ARM: 9408/1: mm: CFI: Fix some erroneous reset prototypes
  ARM: 9407/1: Add support for STACKLEAK gcc plugin
  ARM: 9406/1: Fix callchain_trace() return value
  ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
  ARM: 9403/1: Alpine: Spelling s/initialiing/initializing/
  ARM: 9402/1: Kconfig: Spelling s/Cortex A-/Cortex-A/
  ARM: 9400/1: Remove unused struct 'mod_unwind_map'

Pull Kbuild updates from Masahiro Yamada:

 - Remove tristate choice support from Kconfig

 - Stop using the PROVIDE() directive in the linker script

 - Reduce the number of links for the combination of CONFIG_KALLSYMS and
   CONFIG_DEBUG_INFO_BTF

 - Enable the warning for symbol reference to .exit.* sections by
   default

 - Fix warnings in RPM package builds

 - Improve scripts/make_fit.py to generate a FIT image with separate
   base DTB and overlays

 - Improve choice value calculation in Kconfig

 - Fix conditional prompt behavior in choice in Kconfig

 - Remove support for the uncommon EMAIL environment variable in Debian
   package builds

 - Remove support for the uncommon "name <email>" form for the DEBEMAIL
   environment variable

 - Raise the minimum supported GNU Make version to 4.0

 - Remove stale code for the absolute kallsyms

 - Move header files commonly used for host programs to scripts/include/

 - Introduce the pacman-pkg target to generate a pacman package used in
   Arch Linux

 - Clean up Kconfig

* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
  kbuild: doc: gcc to CC change
  kallsyms: change sym_entry::percpu_absolute to bool type
  kallsyms: unify seq and start_pos fields of struct sym_entry
  kallsyms: add more original symbol type/name in comment lines
  kallsyms: use \t instead of a tab in printf()
  kallsyms: avoid repeated calculation of array size for markers
  kbuild: add script and target to generate pacman package
  modpost: use generic macros for hash table implementation
  kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
  Makefile: add comment to discourage tools/* addition for kernel builds
  kbuild: clean up scripts/remove-stale-files
  kconfig: recursive checks drop file/lineno
  kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
  kallsyms: get rid of code for absolute kallsyms
  kbuild: Create INSTALL_PATH directory if it does not exist
  kbuild: Abort make on install failures
  kconfig: remove 'e1' and 'e2' macros from expression deduplication
  kconfig: remove SYMBOL_CHOICEVAL flag
  kconfig: add const qualifiers to several function arguments
  kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
  ...

Setting '-e' flag tells shells to exit with error exit code immediately
after any of commands fails, and causes make(1) to regard recipes as
failed.

Before this, make will still continue to succeed even after the
installation failed, for example, for insufficient permission or
directory does not exist.

Signed-off-by: Zhang Bingwu <xtexchooser@duck.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

Pull SoC dt updates from Arnd Bergmann:
 "The devicetree updates are fairly well spread out across platforms,
  with Qualcomm making up about a third of the total.

  There are three new SoCs in existing product families this:

   - NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
     instead of just two as well as a GPU and more high-speed I/O
     devices.

   - Qualcomm QCS8550 is a variant of SM8550 for IOT devices

   - Airoha EN7581 is a 10G-PON network chip and related to the MT7981
     Wireless router chip from its parent Mediatek.

  In total there are 58 new machines, including four riscv boards and
  eight for 32-bit arm.

  The most exciting new addition is probably a pair of laptops based on
  the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
  S15 and the Lenovo Yoga Slim7x.

  Other noteworthy new additions are:

   - A total of 20 Qualcomm based machines, mostly Android devices from
     Samsung, Motorola and LG, as well as a wireless router and some
     reference designs

   - Six NXP i.MX based machines, mostly industrial boards along with
     some reference designs

   - Mediatek sees some interesting Filogic based routers including the
     "OpenWRT One", a few new Chromebooks as well as single-board
     computers.

   - Four machines from Solidrun based on Marvell cn913x, replacing the
     older Armada 8000 based counterparts

   - The four Amlogic machines are all set top boxes or reference
     designs for them

   - The nine new Rockchips machines are mostly single-board computers
     including some interesting ones based on the rk3588 chip like the
     ROCK 5 ITX board and the CM3588 with its four NVMe slots

   - The RISC-V boards are all single-board computers based on Starfive
     JH7110, Microchip MPFS and Allwinner D1, which all had similar
     boards already

  There are also a lot of updates to already supported machines, notably
  for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"

* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
  arm64: dts: allwinner: h616: add crypto engine node
  riscv: dts: add clock generator for Sophgo SG2042 SoC
  arm64: dts: rockchip: Add Xunlong Orange Pi 3B
  dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
  arm64: dts: rockchip: Add Radxa ROCK 3B
  dt-bindings: arm: rockchip: Add Radxa ROCK 3B
  mailmap: Update Luca Weiss's email address
  ARM: dts: ixp4xx: nslu2: beeper uses PWM
  arm64: dts: rockchip: add ROCK 5 ITX board
  dt-bindings: arm: rockchip: Add ROCK 5 ITX board
  arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
  arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
  arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
  arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
  dt-bindings: arm: qcom: Add msm8916 based LG devices
  ARM: dts: qcom: msm8960: correct memory base
  arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
  dt-bindings: interconnect: Add Qualcomm IPQ9574 support
  arm64: dts: qcom: sm8150: Add video clock controller node
  arm64: dts: qcom: pm6150: Add vibrator
  ...