Pull ARM platform specific firmware interfaces from Olof Johansson:
 "Two platforms, bcm and exynos have their own firmware interfaces using
  the "secure monitor call", this adds support for those.

  We had originally planned to have a third set of patches in here,
  which would extend support for the existing generic "psci" call that
  is used on multiple platforms as well as Xen and KVM guests, but that
  ended up getting dropped because the patches were not ready in time."

* tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: bcm: mark bcm_kona_smc_init as __init
  ARM: bcm281xx: Add DT support for SMC handler
  ARM: bcm281xx: Add L2 cache enable code
  ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up
  ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.
  ARM: EXYNOS: Add support for Exynos secure firmware
  ARM: EXYNOS: Add support for secure monitor calls
  ARM: Add interface for registering and calling firmware-specific operations

The full mcpm layer is not likely to be relevant to v6 based
platforms, so a multiplatform kernel won't use that code if booted
on v6 hardware.

This patch modifies the AFLAGS for affected mcpm .S files to
specify armv7-a explicitly for that code.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Now that the cluster power API is in place, we can use it for SMP secondary
bringup and CPU hotplug in a generic fashion.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>

Instead of requiring the first man to be elected in advance (which
can be suboptimal in some situations), this patch uses a per-
cluster mutex to co-ordinate selection of the first man.

This should also make it more feasible to reuse this code path for
asynchronous cluster resume (as in CPUidle scenarios).

We must ensure that the vlock data doesn't share a cacheline with
anything else, or dirty cache eviction could corrupt it.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>

CPUs in cluster based systems, such as big.LITTLE, have special needs
when entering the kernel due to a hotplug event, or when resuming from
a deep sleep mode.

This is vectorized so multiple CPUs can enter the kernel in parallel
without serialization.

The mcpm prefix stands for "multi cluster power management", however
this is usable on single cluster systems as well.  Only the basic
structure is introduced here.  This will be extended with later patches.

In order not to complexify things more than they currently have to,
the planned work to make runtime adjusted MPIDR based indexing and
dynamic memory allocation for cluster states is postponed to a later
cycle. The MAX_NR_CLUSTERS and MAX_CPUS_PER_CLUSTER static definitions
should be sufficient for those systems expected to be available in the
near future.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>

Some boards are running with secure firmware running in TrustZone secure
world, which changes the way some things have to be initialized.

This patch adds an interface for platforms to specify available firmware
operations and call them.

A wrapper macro, call_firmware_op(), checks if the operation is provided
and calls it if so, otherwise returns -ENOSYS to allow fallback to
legacy operation..

By default no operations are provided.

Example of use:

In code using firmware ops:

  __raw_writel(virt_to_phys(exynos4_secondary_startup),
               CPU1_BOOT_REG);

  /* Call Exynos specific smc call */
  if (call_firmware_op(cpu_boot, cpu) == -ENOSYS)
          cpu_boot_legacy(...); /* Try legacy way */

  gic_raise_softirq(cpumask_of(cpu), 1);

In board-/platform-specific code:

  static int platformX_do_idle(void)
  {
          /* tell platformX firmware to enter idle */
          return 0;
  }

  static int platformX_cpu_boot(int i)
  {
          /* tell platformX firmware to boot CPU i */
          return 0;
  }

  static const struct firmware_ops platformX_firmware_ops = {
          .do_idle      = exynos_do_idle,
          .cpu_boot     = exynos_cpu_boot,
          /* other operations not available on platformX */
  };

  static void __init board_init_early(void)
  {
          register_firmware_ops(&platformX_firmware_ops);
  }

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Now that we have drivers/irqchip, move VIC irqchip to drivers/irqchip.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>

Now that we have drivers/irqchip, move GIC irqchip to drivers/irqchip. This
is necessary to share the GIC with arm and arm64.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>

ixp2xxx platforms have had no real changes since ~2006 and the maintainer
has said on irc that they can be removed:

13:05 < nico> do you still care about ixp2000?
13:22 < lennert> not really, no
13:58 < nico> do you think we could remove it from the kernel tree?
14:01 < lennert> go for it, and remove ixp23xx too while you're at it

Removing will help simplify ARM consolidation in general and PCI re-work
specifically.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>

Pull slave-dmaengine update from Vinod Koul:
 "This includes the cookie cleanup by Russell, the addition of context
  parameter for dmaengine APIs, more arm dmaengine driver cleanup by
  moving code to dmaengine, this time for imx by Javier and pl330 by
  Boojin along with the usual driver fixes."

Fix up some fairly trivial conflicts with various other cleanups.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits)
  dmaengine: imx: fix the build failure on x86_64
  dmaengine: i.MX: Fix merge of cookie branch.
  dmaengine: i.MX: Add support for interleaved transfers.
  dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages.
  dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'.
  dmaengine: imx-dma: remove unused arg of imxdma_sg_next.
  dmaengine: imx-dma: remove internal structure.
  dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure.
  dmaengine: imx-dma: remove 'in_use' field of 'internal' structure.
  dmaengine: imx-dma: remove sg member from internal structure.
  dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.
  dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.
  dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.
  dmaengine: imx-dma: remove dma_mode member of internal structure.
  dmaengine: imx-dma: remove data member from internal structure.
  dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c
  dmaengine: at_hdmac: add slave config operation
  dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic
  dmaengine/dma_slave: introduce inline wrappers
  dma: imx-sdma: Treat firmware messages as warnings instead of erros
  ...