Pull SoC defconfig updates from Arnd Bergmann:
 "As usual, we enable a number of additional device drivers as loadable
  modules, to support the added platforms. The largest change this time
  is for OMAP2/3, which were not that well supported in the generic
  arm32 defconfig.

  The Tegra SoC platforms are now enabled by default in Kconfig when
  ARCH_TEGRA is enabled, which means the defconfig change is done at the
  same time as the Kconfig change here"

* tag 'soc-defconfig-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
  arch/arm: Drop CONFIG_FIRMWARE_EDID from defconfig files
  arm64: defconfig: Enable DP83TG720 PHY driver
  arm64: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
  ARM: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
  arm64: defconfig: enable pci-pwrctrl-generic as module
  arm64: defconfig: Enable Lontium LT8713sx driver
  arm64: defconfig: Enable Qualcomm Eliza SoC display clock controller
  arm64: defconfig: enable IPQ5210 RDP504 base configs
  arm64: defconfig: Enable Milos LPASS LPI pinctrl driver
  arm64: defconfig: Enable Kaanapali clock controllers
  arm64: defconfig: Enable configs for Arduino VENTUNO Q
  arm64: defconfig: Enable Qualcomm Eliza basic resource providers
  arm64: defconfig: Enable S5KJN1 camera sensor
  arm64: defconfig: Enable configurations for Toradex Aquila AM69
  arm64: defconfig: remove SENSORS_SA67MCU
  arm64: defconfig: Enable Qualcomm WCD937x headphone codec as module
  arm64: defconfig: Enable QCOMTEE module for QTEE-enabled Qualcomm SoCs
  ARM: shmobile: defconfig: Refresh for v7.0-rc1
  arm: multi_v7_defconfig: Enable more OMAP 3/4 related configs
  ARM: multi_v7_defconfig: omap2plus_defconfig: Enable ITE IT66121 driver
  ...

Remove the "michael_mic" crypto_shash algorithm, since it's no longer
used.  Its only users were wireless drivers, which have now been
converted to use the michael_mic() function instead.

It makes sense that no other users ever appeared: Michael MIC is an
insecure algorithm that is specific to WPA TKIP, which itself was an
interim security solution to replace the broken WEP standard.

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260408030651.80336-7-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

arm: OMAP defconfig updates for v7.1

* tag 'omap-for-v7.1/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
  arm: multi_v7_defconfig: Enable more OMAP 3/4 related configs
  ARM: multi_v7_defconfig: omap2plus_defconfig: Enable ITE IT66121 driver

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

CONFIG_FIRMWARE_EDID=y depends on X86 or EFI_GENERIC_STUB. Neither is
true here, so drop the lines from the defconfig files.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kevin Hilman (TI) <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20260401082533.214103-1-tzimmermann@suse.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the ITE IT66121 HDMI bridge driver to support HDMI output on
the BeagleBone Green with the Seeed Studio HDMI cape.

Enable CONFIG_DRM_TILCDC as a module on multi_v7_defconfig to provide
display support for TI AM335x-based SoCs in this kernel configuration.

Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260216-feature_bbge-v2-2-22805cfdbf62@bootlin.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Move the ARM optimized single-block AES en/decryption code into
lib/crypto/, wire it up to the AES library API, and remove the
superseded "aes-arm" crypto_cipher algorithm.

The result is that both the AES library and crypto_cipher APIs are now
optimized for ARM, whereas previously only crypto_cipher was (and the
optimizations weren't enabled by default, which this fixes as well).

Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

Pull ext4 bug fixes from Ted Ts'o:

 - Fix regression caused by removing CONFIG_EXT3_FS when testing some
   very old defconfigs

 - Avoid a BUG_ON when opening a file on a maliciously corrupted file
   system

 - Avoid mm warnings when freeing a very large orphan file metadata

 - Avoid a theoretical races between metadata writeback and checkpoints
   (it's very hard to hit in practice, since the race requires that the
   writeback take a very long time)

* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
  ext4: free orphan info with kvfree
  ext4: detect invalid INLINE_DATA + EXTENTS flag combination
  ext4, doc: fix and improve directory hash tree description
  ext4: wait for ongoing I/O to complete before freeing blocks
  jbd2: ensure that all ongoing I/O complete before freeing blocks

Commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
removed the obsolete EXT3_CONFIG options, since it had been over a
decade since fs/ext3 had been removed.  Unfortunately, there were a
number of defconfigs that still used CONFIG_EXT3_FS which the cleanup
commit didn't fix up.  This led to a large number of defconfig test
builds to fail.  Oops.

Fixes: d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Since v6.15, CRYPTO_CHACHA20_NEON is a hidden option and is selected
automatically.  Therefore, assigning a value to it in a defconfig no
longer has any effect.  Remove it from all files that did this.

Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...