linux-toradex.git/arch/arm/include, branch v3.2.55

ARM: 7527/1: uaccess: explicitly check __user pointer when !CPU_USE_DOMAINS

2014-01-03T04:33:35+00:00

commit 8404663f81d212918ff85f493649a7991209fa04 upstream.

The {get,put}_user macros don't perform range checking on the provided
__user address when !CPU_HAS_DOMAINS.

This patch reworks the out-of-line assembly accessors to check the user
address against a specified limit, returning -EFAULT if is is out of
range.

[will: changed get_user register allocation to match put_user]
[rmk: fixed building on older ARM architectures]

Reported-by: Catalin Marinas 
Signed-off-by: Will Deacon 
Signed-off-by: Russell King 
[bwh: Backported to 3.2: TUSER() was called T()]
Signed-off-by: Ben Hutchings

ARM: 7791/1: a.out: remove partial a.out support

2013-09-10T00:57:14+00:00

commit acfdd4b1f7590d02e9bae3b73bdbbc4a31b05d38 upstream.

a.out support on ARM requires that argc, argv and envp are passed in
r0-r2 respectively, which requires hacking load_aout_binary to
prevent argc being clobbered by the return code. Whilst mainline kernels
do set the registers up in start_thread, the aout loader has never
carried the hack in mainline.

Initialising the registers in this way actually goes against the libc
expectations for ELF binaries, where argc, argv and envp are passed on
the stack, with r0 being used to hold a pointer to an exit function for
cleaning up after the dynamic linker if required. If the pointer is
NULL, then it is ignored. When execing an ELF binary, Linux currently
zeroes r0, then sets it to argc and then finally clobbers it with the
return value of the execve syscall, so we actually end up with:

	r0 = 0
	stack[0] = argc
	r1 = stack[1] = argv
	r2 = stack[2] = envp

libc treats r1 and r2 as undefined. The clobbering of r0 by sys_execve
works for user-spawned threads, but when executing an ELF binary from a
kernel thread (via call_usermodehelper), the execve is performed on the
ret_from_fork path, which restores r0 from the saved pt_regs, resulting
in argc being presented to the C library. This has horrible consequences
when the application exits, since we have an exit function registered
using argc, resulting in a jump to hyperspace.

This patch solves the problem by removing the partial a.out support from
arch/arm/ altogether.

Cc: Ashish Sangwan 
Signed-off-by: Will Deacon 
Signed-off-by: Russell King 
[bwh: Backported to 3.2:
 - Adjust context
 - Adjust uapi filename]
Signed-off-by: Ben Hutchings

ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page

2013-06-29T03:06:28+00:00

commit 1bc39742aab09248169ef9d3727c9def3528b3f3 upstream.

Commit f8b63c1 made flush_kernel_dcache_page a no-op assuming that
the pages it needs to handle are kernel mapped only.  However, for
example when doing direct I/O, pages with user space mappings may
occur.

Thus, continue to do lazy flushing if there are no user space
mappings.  Otherwise, flush the kernel cache lines directly.

Signed-off-by: Simon Baatz 
Reviewed-by: Catalin Marinas 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

signal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear sa_restorer

2013-03-27T02:41:25+00:00

flush_signal_handlers() needs to know whether sigaction::sa_restorer
is defined, not whether SA_RESTORER is defined.  Define the
__ARCH_HAS_SA_RESTORER macro to indicate this.

Vaguely based on upstream commit 574c4866e33d 'consolidate kernel-side
struct sigaction declarations'.

Signed-off-by: Ben Hutchings 
Cc: Al Viro

ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set

2013-01-03T03:32:49+00:00

commit 39141ddfb63a664f26d3f42f64ee386e879b492c upstream.

After commit 846a136881b8f73c1f74250bf6acfaa309cab1f2 ("ARM: vfp: fix
saving d16-d31 vfp registers on v6+ kernels"), the OMAP 2430SDP board
started crashing during boot with omap2plus_defconfig:

[    3.875122] mmcblk0: mmc0:e624 SD04G 3.69 GiB
[    3.915954]  mmcblk0: p1
[    4.086639] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
[    4.093719] Modules linked in:
[    4.096954] CPU: 0    Not tainted  (3.6.0-02232-g759e00b #570)
[    4.103149] PC is at vfp_reload_hw+0x1c/0x44
[    4.107666] LR is at __und_usr_fault_32+0x0/0x8

It turns out that the context save/restore fix unmasked a latent bug
in commit 5aaf254409f8d58229107b59507a8235b715a960 ("ARM: 6203/1: Make
VFPv3 usable on ARMv6").  When CONFIG_VFPv3 is set, but the kernel is
booted on a pre-VFPv3 core, the code attempts to save and restore the
d16-d31 VFP registers.  These are only present on non-D16 VFPv3+, so
this results in an undefined instruction exception.  The code didn't
crash before commit 846a136 because the save and restore code was
only touching d0-d15, present on all VFP.

Fix by implementing a request from Russell King to add a new HWCAP
flag that affirmatively indicates the presence of the d16-d31
registers:

   http://marc.info/?l=linux-arm-kernel&m=135013547905283&w=2

and some feedback from Måns to clarify the name of the HWCAP flag.

Signed-off-by: Paul Walmsley 
Cc: Tony Lindgren 
Cc: Catalin Marinas 
Cc: Dave Martin 
Cc: Måns Rullgård 
Signed-off-by: Russell King 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernels

2012-10-30T23:26:38+00:00

commit 846a136881b8f73c1f74250bf6acfaa309cab1f2 upstream.

Michael Olbrich reported that his test program fails when built with
-O2 -mcpu=cortex-a8 -mfpu=neon, and a kernel which supports v6 and v7
CPUs:

volatile int x = 2;
volatile int64_t y = 2;

int main() {
	volatile int a = 0;
	volatile int64_t b = 0;
	while (1) {
		a = (a + x) % (1 << 30);
		b = (b + y) % (1 << 30);
		assert(a == b);
	}
}

and two instances are run.  When built for just v7 CPUs, this program
works fine.  It uses the "vadd.i64 d19, d18, d16" VFP instruction.

It appears that we do not save the high-16 double VFP registers across
context switches when the kernel is built for v6 CPUs.  Fix that.

Tested-By: Michael Olbrich 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 7487/1: mm: avoid setting nG bit for user mappings that aren't present

2012-09-19T14:05:01+00:00

commit 47f1204329237a0f8655f5a9f14a38ac81946ca1 upstream.

Swap entries are encoding in ptes such that !pte_present(pte) and
pte_file(pte). The remaining bits of the descriptor are used to identify
the swapfile and offset within it to the swap entry.

When writing such a pte for a user virtual address, set_pte_at
unconditionally sets the nG bit, which (in the case of LPAE) will
corrupt the swapfile offset and lead to a BUG:

[  140.494067] swap_free: Unused swap offset entry 000763b4
[  140.509989] BUG: Bad page map in process rs:main Q:Reg  pte:0ec76800 pmd:8f92e003

This patch fixes the problem by only setting the nG bit for user
mappings that are actually present.

Reviewed-by: Catalin Marinas 
Signed-off-by: Will Deacon 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 7488/1: mm: use 5 bits for swapfile type encoding

2012-09-12T02:36:57+00:00

commit f5f2025ef3e2cdb593707cbf87378761f17befbe upstream.

Page migration encodes the pfn in the offset field of a swp_entry_t.
For LPAE, we support physical addresses of up to 36 bits (due to
sparsemem limitations with the size of page flags), requiring 24 bits
to represent a pfn. A further 3 bits are used to encode a swp_entry into
a pte, leaving 5 bits for the type field. Furthermore, the core code
defines MAX_SWAPFILES_SHIFT as 5, so the additional type bit does not
get used.

This patch reduces the width of the type field to 5 bits, allowing us
to create up to 31 swapfiles of 64GB each.

Reviewed-by: Catalin Marinas 
Signed-off-by: Will Deacon 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+

2012-08-09T23:25:04+00:00

commit a76d7bd96d65fa5119adba97e1b58d95f2e78829 upstream.

The open-coded mutex implementation for ARMv6+ cores suffers from a
severe lack of barriers, so in the uncontended case we don't actually
protect any accesses performed during the critical section.

Furthermore, the code is largely a duplication of the ARMv6+ atomic_dec
code but optimised to remove a branch instruction, as the mutex fastpath
was previously inlined. Now that this is executed out-of-line, we can
reuse the atomic access code for the locking (in fact, we use the xchg
code as this produces shorter critical sections).

This patch uses the generic xchg based implementation for mutexes on
ARMv6+, which introduces barriers to the lock/unlock operations and also
has the benefit of removing a fair amount of inline assembly code.

Acked-by: Arnd Bergmann 
Acked-by: Nicolas Pitre 
Reported-by: Shan Kang 
Signed-off-by: Will Deacon 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 7365/1: drop unused parameter from flush_cache_user_range

2012-05-30T23:43:49+00:00

commit 4542b6a0fa6b48d9ae6b41c1efeb618b7a221b2a upstream.

vma isn't used and flush_cache_user_range isn't a standard macro that
is used on several archs with the same prototype. In fact only unicore32
has a macro with the same name (with an identical implementation and no
in-tree users).

This is a part of a patch proposed by Dima Zavin (with Message-id:
1272439931-12795-1-git-send-email-dima@android.com) that didn't get
accepted.

Cc: Dima Zavin 
Acked-by: Catalin Marinas 
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings