linux-toradex.git/arch/arm/kernel/setup.c, branch v3.9.2 Linux kernel for Apalis and Colibri modules ARM: 7694/1: ARM, TCM: initialize TCM in paging_init(), instead of setup_arch() 2013-04-17T15:53:24+00:00 Joonsoo Kim iamjoonsoo.kim@lge.com 2013-04-05T02:16:51+00:00 de40614e92bf1b0308d953387b0cb9d3a5710186 tcm_init() call iotable_init() and it use early_alloc variants which do memblock allocation. Directly using memblock allocation after initializing bootmem should not permitted, because bootmem can't know where are additinally reserved. So move tcm_init() to a safe place before initalizing bootmem. (On the U300) Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
tcm_init() call iotable_init() and it use early_alloc variants which
do memblock allocation. Directly using memblock allocation after
initializing bootmem should not permitted, because bootmem can't know
where are additinally reserved.
So move tcm_init() to a safe place before initalizing bootmem.

(On the U300)

Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: 7690/1: mm: fix CONFIG_LPAE typos 2013-04-03T15:45:51+00:00 Paul Bolle pebolle@tiscali.nl 2013-04-03T11:24:45+00:00 4e1db26a0b42e2b6e27c05d68adcc01709c2eed2 CONFIG_LPAE doesn't exist: the correct option is CONFIG_ARM_LPAE, so fix up the two typos under arch/arm/. The fix to head.S is slightly scary, but this is just for setting up an early io-mapping for the serial port when running on a big-endian, LPAE system. Since these systems don't exist in the wild (at least, I have no access to one outside of kvmtool, which doesn't provide a serial port suitable for earlyprintk), then we can revisit the code later if it causes any problems. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
CONFIG_LPAE doesn't exist: the correct option is CONFIG_ARM_LPAE, so fix
up the two typos under arch/arm/.

The fix to head.S is slightly scary, but this is just for setting up
an early io-mapping for the serial port when running on a big-endian,
LPAE system. Since these systems don't exist in the wild (at least, I
have no access to one outside of kvmtool, which doesn't provide a serial
port suitable for earlyprintk), then we can revisit the code later if it
causes any problems.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: 7680/1: Detect support for SDIV/UDIV from ISAR0 register 2013-03-22T17:16:55+00:00 Stephen Boyd sboyd@codeaurora.org 2013-03-18T18:44:15+00:00 8164f7af88d9ad3a757bd14f634b23997ee77f6b The ISAR0 register indicates support for the SDIV and UDIV instructions in both the Thumb and ARM instruction set. Read the register to detect the supported instructions and update the elf_hwcap mask as appropriate. This is better than adding more and more cpuid checks in proc-v7.S for each new cpu variant that supports these instructions. Acked-by: Will Deacon <will.deacon@arm.com> Cc: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
The ISAR0 register indicates support for the SDIV and UDIV
instructions in both the Thumb and ARM instruction set. Read the
register to detect the supported instructions and update the
elf_hwcap mask as appropriate. This is better than adding more
and more cpuid checks in proc-v7.S for each new cpu variant that
supports these instructions.

Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: 7679/1: Clear IDIVT hwcap if CONFIG_ARM_THUMB=n 2013-03-22T17:16:54+00:00 Stephen Boyd sboyd@codeaurora.org 2013-03-18T18:44:14+00:00 c40e3641670eb6ebfdb71d4b0c775416ef95f4f0 Don't advertise support for the SDIV/UDIV thumb instructions if the kernel is not compiled with support for thumb userspace. This is in line with how we remove the THUMB hwcap in these configurations. Acked-by: Will Deacon <will.deacon@arm.com> Cc: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Don't advertise support for the SDIV/UDIV thumb instructions if
the kernel is not compiled with support for thumb userspace. This
is in line with how we remove the THUMB hwcap in these
configurations.

Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: 7602/1: Pass real "__machine_arch_type" variable to setup_machine_tags() procedure 2012-12-16T10:04:24+00:00 Alexander Shiyan shc_work@mail.ru 2012-12-12T07:32:11+00:00 b8b499c86be58cb309964fcab5b62ac4a240a878 This modification is needed to proper boot the custom machines with the IDs that are not described in the mach-types.h table. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
This modification is needed to proper boot the custom machines with
the IDs that are not described in the mach-types.h table.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: 7587/1: implement optimized percpu variable access 2012-12-03T11:16:36+00:00 Rob Herring rob.herring@calxeda.com 2012-11-29T19:39:54+00:00 14318efb322e2fe1a034c69463d725209eb9d548 Use the previously unused TPIDRPRW register to store percpu offsets. TPIDRPRW is only accessible in PL1, so it can only be used in the kernel. This replaces 2 loads with a mrc instruction for each percpu variable access. With hackbench, the performance improvement is 1.4% on Cortex-A9 (highbank). Taking an average of 30 runs of "hackbench -l 1000" yields: Before: 6.2191 After: 6.1348 Will Deacon reported similar delta on v6 with 11MPCore. The asm "memory clobber" are needed here to ensure the percpu offset gets reloaded. Testing by Will found that this would not happen in __schedule() which is a bit of a special case as preemption is disabled but the execution can move cores. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Use the previously unused TPIDRPRW register to store percpu offsets.
TPIDRPRW is only accessible in PL1, so it can only be used in the kernel.

This replaces 2 loads with a mrc instruction for each percpu variable
access. With hackbench, the performance improvement is 1.4% on Cortex-A9
(highbank). Taking an average of 30 runs of "hackbench -l 1000" yields:

Before: 6.2191
After: 6.1348

Will Deacon reported similar delta on v6 with 11MPCore.

The asm "memory clobber" are needed here to ensure the percpu offset
gets reloaded. Testing by Will found that this would not happen in
__schedule() which is a bit of a special case as preemption is disabled
but the execution can move cores.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Merge branch 'bl-cpuinfo' of git://linux-arm.org/linux-2.6-lp into devel-stable 2012-11-20T20:19:38+00:00 Russell King rmk+kernel@arm.linux.org.uk 2012-11-20T20:19:38+00:00 82b5df7bf27ca6cf642499bc3bcae1c93b9ac4ba 






ARM: kernel: add cpu logical map DT init in setup_arch
2012-11-19T15:44:34+00:00

Lorenzo Pieralisi
lorenzo.pieralisi@arm.com

2011-12-14T16:01:24+00:00

5587164eea4aad88fcb79d9b21dc8f14fea598cd

As soon as the device tree is unflattened the cpu logical to physical
mapping is carried out in setup_arch to build a proper array of MPIDR and
corresponding logical indexes.

The mapping could have been carried out using the flattened DT blob and
related primitives, but since the mapping is not needed by early boot
code it can safely be executed when the device tree has been uncompressed to
its tree data structure.

This patch adds the arm_dt_init_cpu maps() function call in setup_arch().

If the kernel is not compiled with DT support the function is empty and
no logical mapping takes place through it; the mapping carried out in
smp_setup_processor_id() is left unchanged.
If DT is supported the mapping created in smp_setup_processor_id() is overriden.
The DT mapping also sets the possible cpus mask, hence platform
code need not set it again in the respective smp_init_cpus() functions.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>





As soon as the device tree is unflattened the cpu logical to physical
mapping is carried out in setup_arch to build a proper array of MPIDR and
corresponding logical indexes.

The mapping could have been carried out using the flattened DT blob and
related primitives, but since the mapping is not needed by early boot
code it can safely be executed when the device tree has been uncompressed to
its tree data structure.

This patch adds the arm_dt_init_cpu maps() function call in setup_arch().

If the kernel is not compiled with DT support the function is empty and
no logical mapping takes place through it; the mapping carried out in
smp_setup_processor_id() is left unchanged.
If DT is supported the mapping created in smp_setup_processor_id() is overriden.
The DT mapping also sets the possible cpus mask, hence platform
code need not set it again in the respective smp_init_cpus() functions.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>







ARM: kernel: smp_setup_processor_id() updates
2012-11-19T15:44:33+00:00

Lorenzo Pieralisi
lorenzo.pieralisi@arm.com

2012-11-08T18:05:56+00:00

cb8cf4f821044f140ea5b9c8d4f816f0c05fab44

This patch applies some basic changes to the smp_setup_processor_id()
ARM implementation to make the code that builds cpu_logical_map more
uniform across the kernel.

The function now prints the full extent of the boot CPU MPIDR[23:0] and
initializes the cpu_logical_map for CPUs up to nr_cpu_ids.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>





This patch applies some basic changes to the smp_setup_processor_id()
ARM implementation to make the code that builds cpu_logical_map more
uniform across the kernel.

The function now prints the full extent of the boot CPU MPIDR[23:0] and
initializes the cpu_logical_map for CPUs up to nr_cpu_ids.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>







ARM: kernel: update cpuinfo to print all online CPUs features
2012-11-19T14:51:12+00:00

Lorenzo Pieralisi
lorenzo.pieralisi@arm.com

2012-09-10T17:55:21+00:00

b4b8f770eb10a1bccaf8aa0ec1956e2dd7ed1e0a

Currently, reading /proc/cpuinfo provides userspace with CPU ID of
the CPU carrying out the read from the file. This is fine as long as all
CPUs in the system are the same. With the advent of big.LITTLE and
heterogenous ARM systems this approach provides user space with incorrect
bits of information since CPU ids in the system might differ from the one
provided by the CPU reading the file.

This patch updates the cpuinfo show function so that a read from
/proc/cpuinfo prints HW information for all online CPUs at once, mirroring
 x86 behaviour.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>





Currently, reading /proc/cpuinfo provides userspace with CPU ID of
the CPU carrying out the read from the file. This is fine as long as all
CPUs in the system are the same. With the advent of big.LITTLE and
heterogenous ARM systems this approach provides user space with incorrect
bits of information since CPU ids in the system might differ from the one
provided by the CPU reading the file.

This patch updates the cpuinfo show function so that a read from
/proc/cpuinfo prints HW information for all online CPUs at once, mirroring
 x86 behaviour.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>