linux-toradex.git/arch/arm/kernel/setup.c, branch v5.11

ARM: 9024/1: Drop useless cast of "u64" to "long long"

2020-11-12T14:53:21+00:00

As "u64" is equivalent to "unsigned long long", there is no need to cast
a "u64" parameter for printing it using the "0x%08llx" format specifier.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Russell King

ARM: 9023/1: Spelling s/mmeory/memory/

2020-11-12T14:53:20+00:00

Fix a misspelling of the word "memory".

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Russell King

ARM: 9020/1: mm: use correct section size macro to describe the FDT virtual address

2020-10-28T14:59:30+00:00

Commit

  149a3ffe62b9dbc3 ("9012/1: move device tree mapping out of linear region")

created a permanent, read-only section mapping of the device tree blob
provided by the firmware, and added a set of macros to get the base and
size of the virtually mapped FDT based on the physical address. However,
while the mapping code uses the SECTION_SIZE macro correctly, the macros
use PMD_SIZE instead, which means something entirely different on ARM when
using short descriptors, and is therefore not the right quantity to use
here. So replace PMD_SIZE with SECTION_SIZE. While at it, change the names
of the macro and its parameter to clarify that it returns the virtual
address of the start of the FDT, based on the physical address in memory.

Tested-by: Joel Stanley 
Tested-by: Marek Szyprowski 
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Russell King

ARM: 9016/2: Initialize the mapping of KASan shadow memory

2020-10-27T12:11:10+00:00

This patch initializes KASan shadow region's page table and memory.
There are two stage for KASan initializing:

1. At early boot stage the whole shadow region is mapped to just
   one physical page (kasan_zero_page). It is finished by the function
   kasan_early_init which is called by __mmap_switched(arch/arm/kernel/
   head-common.S)

2. After the calling of paging_init, we use kasan_zero_page as zero
   shadow for some memory that KASan does not need to track, and we
   allocate a new shadow space for the other memory that KASan need to
   track. These issues are finished by the function kasan_init which is
   call by setup_arch.

When using KASan we also need to increase the THREAD_SIZE_ORDER
from 1 to 2 as the extra calls for shadow memory uses quite a bit
of stack.

As we need to make a temporary copy of the PGD when setting up
shadow memory we create a helpful PGD_SIZE definition for both
LPAE and non-LPAE setups.

The KASan core code unconditionally calls pud_populate() so this
needs to be changed from BUG() to do {} while (0) when building
with KASan enabled.

After the initial development by Andre Ryabinin several modifications
have been made to this code:

Abbott Liu 
- Add support ARM LPAE: If LPAE is enabled, KASan shadow region's
  mapping table need be copied in the pgd_alloc() function.
- Change kasan_pte_populate,kasan_pmd_populate,kasan_pud_populate,
  kasan_pgd_populate from .meminit.text section to .init.text section.
  Reported by Florian Fainelli 

Linus Walleij :
- Drop the custom mainpulation of TTBR0 and just use
  cpu_switch_mm() to switch the pgd table.
- Adopt to handle 4th level page tabel folding.
- Rewrite the entire page directory and page entry initialization
  sequence to be recursive based on ARM64:s kasan_init.c.

Ard Biesheuvel :
- Necessary underlying fixes.
- Crucial bug fixes to the memory set-up code.

Co-developed-by: Andrey Ryabinin 
Co-developed-by: Abbott Liu 
Co-developed-by: Ard Biesheuvel 

Cc: Alexander Potapenko 
Cc: Dmitry Vyukov 
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport 
Acked-by: Mike Rapoport 
Reviewed-by: Ard Biesheuvel 
Tested-by: Ard Biesheuvel  # QEMU/KVM/mach-virt/LPAE/8G
Tested-by: Florian Fainelli  # Brahma SoCs
Tested-by: Ahmad Fatoum  # i.MX6Q
Reported-by: Russell King - ARM Linux 
Reported-by: Florian Fainelli 
Signed-off-by: Andrey Ryabinin 
Signed-off-by: Abbott Liu 
Signed-off-by: Florian Fainelli 
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Linus Walleij 
Signed-off-by: Russell King

ARM: 9012/1: move device tree mapping out of linear region

2020-10-27T12:11:01+00:00

On ARM, setting up the linear region is tricky, given the constraints
around placement and alignment of the memblocks, and how the kernel
itself as well as the DT are placed in physical memory.

Let's simplify matters a bit, by moving the device tree mapping to the
top of the address space, right between the end of the vmalloc region
and the start of the the fixmap region, and create a read-only mapping
for it that is independent of the size of the linear region, and how it
is organized.

Since this region was formerly used as a guard region, which will now be
populated fully on LPAE builds by this read-only mapping (which will
still be able to function as a guard region for stray writes), bump the
start of the [underutilized] fixmap region by 512 KB as well, to ensure
that there is always a proper guard region here. Doing so still leaves
ample room for the fixmap space, even with NR_CPUS set to its maximum
value of 32.

Tested-by: Linus Walleij 
Reviewed-by: Linus Walleij 
Reviewed-by: Nicolas Pitre 
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Russell King

ARM: 9011/1: centralize phys-to-virt conversion of DT/ATAGS address

2020-10-27T12:10:59+00:00

Before moving the DT mapping out of the linear region, let's prepare
for this change by removing all the phys-to-virt translations of the
__atags_pointer variable, and perform this translation only once at
setup time.

Tested-by: Linus Walleij 
Reviewed-by: Linus Walleij 
Acked-by: Nicolas Pitre 
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Russell King

arch, drivers: replace for_each_membock() with for_each_mem_range()

2020-10-14T01:38:35+00:00

There are several occurrences of the following pattern:

	for_each_memblock(memory, reg) {
		start = __pfn_to_phys(memblock_region_memory_base_pfn(reg);
		end = __pfn_to_phys(memblock_region_memory_end_pfn(reg));

		/* do something with start and end */
	}

Using for_each_mem_range() iterator is more appropriate in such cases and
allows simpler and cleaner code.

[akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build]
[rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring]
  Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Andy Lutomirski 
Cc: Baoquan He 
Cc: Benjamin Herrenschmidt 
Cc: Borislav Petkov 
Cc: Catalin Marinas 
Cc: Christoph Hellwig 
Cc: Daniel Axtens 
Cc: Dave Hansen 
Cc: Emil Renner Berthing 
Cc: Hari Bathini 
Cc: Ingo Molnar 
Cc: Ingo Molnar 
Cc: Jonathan Cameron 
Cc: Marek Szyprowski 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Miguel Ojeda 
Cc: Palmer Dabbelt 
Cc: Paul Mackerras 
Cc: Paul Walmsley 
Cc: Peter Zijlstra 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org
Signed-off-by: Linus Torvalds

arch/arm/setup: Drop dummy_con initialization

2020-01-14T14:29:15+00:00

con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.

Signed-off-by: Arvind Sankar 
Link: https://lore.kernel.org/r/20191218214506.49252-6-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: add checks for the return value of memblock_alloc*()

2019-03-12T17:04:02+00:00

Add check for the return value of memblock_alloc*() functions and call
panic() in case of error.  The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.

The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.

  @@
  expression ptr, size, align;
  @@
  ptr = memblock_alloc(size, align);
  + if (!ptr)
  + 	panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);

[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
  Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
  Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
  Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport 
Signed-off-by: Anders Roxell 
Reviewed-by: Guo Ren 		[c-sky]
Acked-by: Paul Burton 		[MIPS]
Acked-by: Heiko Carstens 	[s390]
Reviewed-by: Juergen Gross 		[Xen]
Reviewed-by: Geert Uytterhoeven 	[m68k]
Acked-by: Max Filippov 		[xtensa]
Cc: Catalin Marinas 
Cc: Christophe Leroy 
Cc: Christoph Hellwig 
Cc: "David S. Miller" 
Cc: Dennis Zhou 
Cc: Greentime Hu 
Cc: Greg Kroah-Hartman 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Mark Salter 
Cc: Matt Turner 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Petr Mladek 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Rob Herring 
Cc: Rob Herring 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Tony Luck 
Cc: Vineet Gupta 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds