linux-toradex.git/arch/arm/kernel, branch v3.2.25 Linux kernel for Apalis and Colibri modules ARM: fix rcu stalls on SMP platforms 2012-07-12T03:32:11+00:00 Russell King rmk+kernel@arm.linux.org.uk 2012-01-19T15:20:58+00:00 bd00fcf3ec0c7fc0b194ba37a07564517fed11b8 commit 7deabca0acfe02b8e18f59a4c95676012f49a304 upstream. We can stall RCU processing on SMP platforms if a CPU sits in its idle loop for a long time. This happens because we don't call irq_enter() and irq_exit() around generic_smp_call_function_interrupt() and friends. Add the necessary calls, and remove the one from within ipi_timer(), so that they're all in a common place. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 7deabca0acfe02b8e18f59a4c95676012f49a304 upstream.

We can stall RCU processing on SMP platforms if a CPU sits in its idle
loop for a long time.  This happens because we don't call irq_enter()
and irq_exit() around generic_smp_call_function_interrupt() and
friends.  Add the necessary calls, and remove the one from within
ipi_timer(), so that they're all in a common place.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held 2012-05-30T23:43:49+00:00 Dima Zavin dima@android.com 2012-04-30T09:26:14+00:00 6236459be5996e9417020f03ccf7019eccbf1449 commit 435a7ef52db7d86e67a009b36cac1457f8972391 upstream. We can't be holding the mmap_sem while calling flush_cache_user_range because the flush can fault. If we fault on a user address, the page fault handler will try to take mmap_sem again. Since both places acquire the read lock, most of the time it succeeds. However, if another thread tries to acquire the write lock on the mmap_sem (e.g. mmap) in between the call to flush_cache_user_range and the fault, the down_read in do_page_fault will deadlock. [will: removed drop of vma parameter as already queued by rmk (7365/1)] Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 435a7ef52db7d86e67a009b36cac1457f8972391 upstream.

We can't be holding the mmap_sem while calling flush_cache_user_range
because the flush can fault. If we fault on a user address, the
page fault handler will try to take mmap_sem again. Since both places
acquire the read lock, most of the time it succeeds. However, if another
thread tries to acquire the write lock on the mmap_sem (e.g. mmap) in
between the call to flush_cache_user_range and the fault, the down_read
in do_page_fault will deadlock.

[will: removed drop of vma parameter as already queued by rmk (7365/1)]

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ARM: 7365/1: drop unused parameter from flush_cache_user_range 2012-05-30T23:43:49+00:00 Dima Zavin dima@android.com 2012-03-29T19:44:06+00:00 5e6d6ba821e9207db88e808177ea66e8ac880983 commit 4542b6a0fa6b48d9ae6b41c1efeb618b7a221b2a upstream. vma isn't used and flush_cache_user_range isn't a standard macro that is used on several archs with the same prototype. In fact only unicore32 has a macro with the same name (with an identical implementation and no in-tree users). This is a part of a patch proposed by Dima Zavin (with Message-id: 1272439931-12795-1-git-send-email-dima@android.com) that didn't get accepted. Cc: Dima Zavin <dima@android.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 4542b6a0fa6b48d9ae6b41c1efeb618b7a221b2a upstream.

vma isn't used and flush_cache_user_range isn't a standard macro that
is used on several archs with the same prototype. In fact only unicore32
has a macro with the same name (with an identical implementation and no
in-tree users).

This is a part of a patch proposed by Dima Zavin (with Message-id:
1272439931-12795-1-git-send-email-dima@android.com) that didn't get
accepted.

Cc: Dima Zavin <dima@android.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ARM: 7414/1: SMP: prevent use of the console when using idmap_pgd 2012-05-11T12:14:59+00:00 Colin Cross ccross@android.com 2012-05-05T19:58:13+00:00 2f03a6bb3e9dc3a1b5fb10c7885033809896c4f9 commit fde165b2a29673aabf18ceff14dea1f1cfb0daad upstream. Commit 4e8ee7de227e3ab9a72040b448ad728c5428a042 (ARM: SMP: use idmap_pgd for mapping MMU enable during secondary booting) switched secondary boot to use idmap_pgd, which is initialized during early_initcall, instead of a page table initialized during __cpu_up. This causes idmap_pgd to contain the static mappings but be missing all dynamic mappings. If a console is registered that creates a dynamic mapping, the printk in secondary_start_kernel will trigger a data abort on the missing mapping before the exception handlers have been initialized, leading to a hang. Initial boot is not affected because no consoles have been registered, and resume is usually not affected because the offending console is suspended. Onlining a cpu with hotplug triggers the problem. A workaround is to the printk in secondary_start_kernel until after the page tables have been switched back to init_mm. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit fde165b2a29673aabf18ceff14dea1f1cfb0daad upstream.

Commit 4e8ee7de227e3ab9a72040b448ad728c5428a042 (ARM: SMP: use
idmap_pgd for mapping MMU enable during secondary booting)
switched secondary boot to use idmap_pgd, which is initialized
during early_initcall, instead of a page table initialized during
__cpu_up.  This causes idmap_pgd to contain the static mappings
but be missing all dynamic mappings.

If a console is registered that creates a dynamic mapping, the
printk in secondary_start_kernel will trigger a data abort on
the missing mapping before the exception handlers have been
initialized, leading to a hang.  Initial boot is not affected
because no consoles have been registered, and resume is usually
not affected because the offending console is suspended.
Onlining a cpu with hotplug triggers the problem.

A workaround is to the printk in secondary_start_kernel until
after the page tables have been switched back to init_mm.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ARM: 7410/1: Add extra clobber registers for assembly in kernel_execve 2012-05-11T12:14:58+00:00 Tim Bird tim.bird@am.sony.com 2012-05-02T21:55:39+00:00 3e9221a04341a2e8380ad7f391c4c61cd4126387 commit e787ec1376e862fcea1bfd523feb7c5fb43ecdb9 upstream. The inline assembly in kernel_execve() uses r8 and r9. Since this code sequence does not return, it usually doesn't matter if the register clobber list is accurate. However, I saw a case where a particular version of gcc used r8 as an intermediate for the value eventually passed to r9. Because r8 is used in the inline assembly, and not mentioned in the clobber list, r9 was set to an incorrect value. This resulted in a kernel panic on execution of the first user-space program in the system. r9 is used in ret_to_user as the thread_info pointer, and if it's wrong, bad things happen. Signed-off-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit e787ec1376e862fcea1bfd523feb7c5fb43ecdb9 upstream.

The inline assembly in kernel_execve() uses r8 and r9.  Since this
code sequence does not return, it usually doesn't matter if the
register clobber list is accurate.  However, I saw a case where a
particular version of gcc used r8 as an intermediate for the value
eventually passed to r9.  Because r8 is used in the inline
assembly, and not mentioned in the clobber list, r9 was set
to an incorrect value.

This resulted in a kernel panic on execution of the first user-space
program in the system.  r9 is used in ret_to_user as the thread_info
pointer, and if it's wrong, bad things happen.

Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ARM: 7406/1: hotplug: copy the affinity mask when forcefully migrating IRQs 2012-05-11T12:14:46+00:00 Will Deacon will.deacon@arm.com 2012-04-27T11:56:24+00:00 586e76ea0975340dd826e36522ac162e83d90962 commit 5e7371ded05adfcfcee44a8bc070bfc37979b8f2 upstream. When a CPU is hotplugged off, we migrate any IRQs currently affine to it away and onto another online CPU by calling the irq_set_affinity function of the relevant interrupt controller chip. This function returns either IRQ_SET_MASK_OK or IRQ_SET_MASK_OK_NOCOPY, to indicate whether irq_data.affinity was updated. If we are forcefully migrating an interrupt (because the affinity mask no longer identifies any online CPUs) then we should update the IRQ affinity mask to reflect the new CPU set. Failure to do so can potentially leave /proc/irq/n/smp_affinity identifying only offline CPUs, which may confuse userspace IRQ balancing daemons. This patch updates migrate_one_irq to copy the affinity mask when the interrupt chip returns IRQ_SET_MASK_OK after forcefully changing the affinity of an interrupt. Reported-by: Leif Lindholm <leif.lindholm@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 5e7371ded05adfcfcee44a8bc070bfc37979b8f2 upstream.

When a CPU is hotplugged off, we migrate any IRQs currently affine to it
away and onto another online CPU by calling the irq_set_affinity
function of the relevant interrupt controller chip. This function
returns either IRQ_SET_MASK_OK or IRQ_SET_MASK_OK_NOCOPY, to indicate
whether irq_data.affinity was updated.

If we are forcefully migrating an interrupt (because the affinity mask
no longer identifies any online CPUs) then we should update the IRQ
affinity mask to reflect the new CPU set. Failure to do so can
potentially leave /proc/irq/n/smp_affinity identifying only offline
CPUs, which may confuse userspace IRQ balancing daemons.

This patch updates migrate_one_irq to copy the affinity mask when
the interrupt chip returns IRQ_SET_MASK_OK after forcefully changing the
affinity of an interrupt.

Reported-by: Leif Lindholm <leif.lindholm@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ARM: 7357/1: perf: fix overflow handling for xscale2 PMUs 2012-03-12T19:31:39+00:00 Will Deacon will.deacon@arm.com 2012-03-06T16:35:55+00:00 261d612b2edcb3e8b00ad990b6b81c71e4a5d108 commit 3f31ae121348afd9ed39700ea2a63c17cd7eeed1 upstream. xscale2 PMUs indicate overflow not via the PMU control register, but by a separate overflow FLAG register instead. This patch fixes the xscale2 PMU code to use this register to detect to overflow and ensures that we clear any pending overflow when disabling a counter. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3f31ae121348afd9ed39700ea2a63c17cd7eeed1 upstream.

xscale2 PMUs indicate overflow not via the PMU control register, but by
a separate overflow FLAG register instead.

This patch fixes the xscale2 PMU code to use this register to detect
to overflow and ensures that we clear any pending overflow when
disabling a counter.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 7356/1: perf: check that we have an event in the PMU IRQ handlers 2012-03-12T19:31:39+00:00 Will Deacon will.deacon@arm.com 2012-03-06T16:34:50+00:00 288733a6065034d1870b02b164da0fb2d8452178 commit f6f5a30c834135c9f2fa10400c59ebbdd9188567 upstream. The PMU IRQ handlers in perf assume that if a counter has overflowed then perf must be responsible. In the paranoid world of crazy hardware, this could be false, so check that we do have a valid event before attempting to dereference NULL in the interrupt path. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f6f5a30c834135c9f2fa10400c59ebbdd9188567 upstream.

The PMU IRQ handlers in perf assume that if a counter has overflowed
then perf must be responsible. In the paranoid world of crazy hardware,
this could be false, so check that we do have a valid event before
attempting to dereference NULL in the interrupt path.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 7355/1: perf: clear overflow flag when disabling counter on ARMv7 PMU 2012-03-12T19:31:38+00:00 Will Deacon will.deacon@arm.com 2012-03-06T16:34:22+00:00 075964ad4370162964f41ba1136b8581ab1a302a commit 99c1745b9c76910e195889044f914b4898b7c9a5 upstream. When disabling a counter on an ARMv7 PMU, we should also clear the overflow flag in case an overflow occurred whilst stopping the counter. This prevents a spurious overflow being picked up later and leading to either false accounting or a NULL dereference. Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 99c1745b9c76910e195889044f914b4898b7c9a5 upstream.

When disabling a counter on an ARMv7 PMU, we should also clear the
overflow flag in case an overflow occurred whilst stopping the counter.
This prevents a spurious overflow being picked up later and leading to
either false accounting or a NULL dereference.

Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 7354/1: perf: limit sample_period to half max_period in non-sampling mode 2012-03-12T19:31:38+00:00 Will Deacon will.deacon@arm.com 2012-03-06T16:33:17+00:00 14e84b15bcd96521190c5566c440c56553e66fc9 commit 5727347180ebc6b4a866fcbe00dcb39cc03acb37 upstream. On ARM, the PMU does not stop counting after an overflow and therefore IRQ latency affects the new counter value read by the kernel. This is significant for non-sampling runs where it is possible for the new value to overtake the previous one, causing the delta to be out by up to max_period events. Commit a737823d ("ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency") attempted to fix this problem by allowing interrupt handlers to pass an overflow flag to the event update function, causing the overflow calculation to assume that the counter passed through zero when going from prev to new. Unfortunately, this doesn't work when overflow occurs on the perf_task_tick path because we have the flag cleared and end up computing a large negative delta. This patch removes the overflow flag from armpmu_event_update and instead limits the sample_period to half of the max_period for non-sampling profiling runs. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5727347180ebc6b4a866fcbe00dcb39cc03acb37 upstream.

On ARM, the PMU does not stop counting after an overflow and therefore
IRQ latency affects the new counter value read by the kernel. This is
significant for non-sampling runs where it is possible for the new value
to overtake the previous one, causing the delta to be out by up to
max_period events.

Commit a737823d ("ARM: 6835/1: perf: ensure overflows aren't missed due
to IRQ latency") attempted to fix this problem by allowing interrupt
handlers to pass an overflow flag to the event update function, causing
the overflow calculation to assume that the counter passed through zero
when going from prev to new. Unfortunately, this doesn't work when
overflow occurs on the perf_task_tick path because we have the flag
cleared and end up computing a large negative delta.

This patch removes the overflow flag from armpmu_event_update and
instead limits the sample_period to half of the max_period for
non-sampling profiling runs.

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>