linux-toradex.git/arch/arm/mach-integrator, branch master

ARM: versatile: move integrator/realview/vexpress to versatile

2022-04-04T08:22:37+00:00

These are all fairly small platforms by now, and they are
closely related. Just move them all into a single directory.

Cc: Linus Walleij 
Cc: Liviu Dudau 
Cc: Lorenzo Pieralisi 
Tested-by: Sudeep Holla 
Acked-by: Sudeep Holla 
Signed-off-by: Arnd Bergmann

ARM: remove support for NOMMU ARMv4/v5

2022-03-17T08:13:13+00:00

It is possible to build MMU-less kernels for Cortex-M base
microcrontrollers as well as a couple of older platforms that
have not been converted to CONFIG_ARCH_MULTIPLATFORM,
specifically ep93xx, footbridge, dove, sa1100 and s3c24xx.

It seems unlikely that anybody has tested those configurations
in recent years, as even building them is frequently broken.
A patch I submitted caused another build time regression
in this configuration. I sent a patch for that, but it seems
better to also remove the option entirely, leaving ARMv7-M
as the only supported Arm NOMMU target for simplicity.

A couple of platforms have dependencies on CONFIG_MMU, those
can all be removed now. Notably, mach-integrator tries to
support MMU-less CPU cores, but those have not actually been
selectable for a long time.

This addresses several build failures in randconfig builds that
have accumulated over the years.

Cc: Vladimir Murzin 
Cc: Russell King 
Acked-by: Geert Uytterhoeven 
Reviewed-by: Linus Walleij 
Reviewed by: Ard Biesheuvel 
Signed-off-by: Arnd Bergmann

clk: versatile: Rename ICST to CLK_ICST

2021-10-15T01:00:25+00:00

For consistency, prefix the ICST config option with CLK as all other
clock source drivers have.

Signed-off-by: Jean Delvare 
Cc: Linus Walleij 
Cc: Michael Turquette 
Cc: Stephen Boyd 
Reviewed-by: Linus Walleij 
Link: https://lore.kernel.org/r/20210901180833.4558932d@endymion
Signed-off-by: Stephen Boyd

mm: reorder includes after introduction of linux/pgtable.h

2020-06-09T16:39:13+00:00

The replacement of  with  made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s  " % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include " % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds

mm: introduce include/linux/pgtable.h

2020-06-09T16:39:13+00:00

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds

Merge tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into arm/soc

2020-05-15T21:04:40+00:00

VExpress modularization

This series enables building various Versatile Express platform drivers
as modules. The primary target is the Fast Model FVP which is supported
in Android. As Android is moving towards their GKI, or generic kernel,
the hardware support has to be in modules. Currently ARCH_VEXPRESS
enables several built-in only drivers. Some of these are needed, but
some are only needed for older 32-bit VExpress platforms and can just
be disabled.

* tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  ARM: vexpress: Don't select VEXPRESS_CONFIG
  bus: vexpress-config: Support building as module
  vexpress: Move setting master site to vexpress-config bus
  bus: vexpress-config: simplify config bus probing
  bus: vexpress-config: Merge vexpress-syscfg into vexpress-config
  mfd: vexpress-sysreg: Support building as a module
  mfd: vexpress-sysreg: Use devres API variants
  mfd: vexpress-sysreg: Drop unused syscon child devices
  mfd: vexpress-sysreg: Drop selecting CONFIG_CLKSRC_MMIO
  clk: vexpress-osc: Support building as a module
  clk: vexpress-osc: Use the devres clock API variants
  clk: versatile: Only enable SP810 on 32-bit by default
  clk: versatile: Rework kconfig structure
  amba: Retry adding deferred devices at late_initcall
  arm64: vexpress: Don't select CONFIG_POWER_RESET_VEXPRESS
  ARM: vexpress: Move vexpress_flags_set() into arch code

Signed-off-by: Arnd Bergmann

clk: versatile: Rework kconfig structure

2020-05-05T16:43:14+00:00

CONFIG_COMMON_CLK_VERSATILE doesn't really do anything other than hiding
Arm Ltd reference platform clock drivers. It is both selected by the
platforms that need it and has a 'depends on' for those platforms. Let's
drop the selects and convert CONFIG_COMMON_CLK_VERSATILE into a
menuconfig entry. With this make CONFIG_ICST visible.

Move the 'select REGMAP_MMIO' to the drivers that require it (SP810 did
not).

This also has the side effect of enabling CONFIG_ICST for COMPILE_TEST
as it was not visible before.

Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Liviu Dudau 
Cc: Lorenzo Pieralisi 
Cc: Linus Walleij 
Reviewed-by: Sudeep Holla 
Reviewed-by: Stephen Boyd 
Signed-off-by: Rob Herring

ARM: integrator: Add some Kconfig selections

2020-04-28T19:50:20+00:00

The CMA and DMA_CMA Kconfig options need to be selected
by the Integrator in order to produce boot console on some
Integrator systems.

The REGULATOR and REGULATOR_FIXED_VOLTAGE need to be
selected in order to boot the system from an external
MMC card when using MMCI/PL181 from the device tree
probe path.

Select these things directly from the Kconfig so we are
sure to be able to bring the systems up with console
from any device tree.

Signed-off-by: Linus Walleij

ARM: integrator: Retire LM and IM-PD1 boardfile code

2020-04-28T19:50:20+00:00

We now support probing and populating logical modules and
the IM-PD1 example module in particular directly from the
device tree using the LM bus driver.

Signed-off-by: Linus Walleij

ARM: integrator: Drop unneeded select of SPARSE_IRQ

2020-04-16T11:01:43+00:00

Support for ARM Ltd. Integrator systems depends on ARCH_MULTIPLATFORM.
As the latter selects SPARSE_IRQ, there is no need for ARCH_INTEGRATOR
to select SPARSE_IRQ.

Signed-off-by: Geert Uytterhoeven 
Cc: Linus Walleij 
Signed-off-by: Linus Walleij