linux-toradex.git/arch/arm/mach-qcom/Kconfig, branch master Linux kernel for Apalis and Colibri modules ARM: qcom: merge remaining subplatforms into sensible Kconfig entry 2024-02-06T21:00:02+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2023-12-16T16:27:00+00:00 99497df59427a11222571034afebf2f0f7f9a3e2 Three remaining Qualcomm platforms have special handling of the TEXT_OFFSET to reserve the memory at the beginnig of the system RAM, see the commit 9e775ad19f52 ("ARM: 7012/1: Set proper TEXT_OFFSET for newer MSMs"). This is required for older platforms like IPQ40xx, MSM8x60, MSM8960 and APQ8064 and is compatible with other 32-bit Qualcomm platforms. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20231216162700.863456-4-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> 
Three remaining Qualcomm platforms have special handling of the
TEXT_OFFSET to reserve the memory at the beginnig of the system RAM, see
the commit 9e775ad19f52 ("ARM: 7012/1: Set proper TEXT_OFFSET for newer
MSMs"). This is required for older platforms like IPQ40xx, MSM8x60,
MSM8960 and APQ8064 and is compatible with other 32-bit Qualcomm
platforms.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231216162700.863456-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
ARM: qcom: drop most of 32-bit ARCH_QCOM subtypes 2024-02-06T21:00:02+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2023-12-16T16:26:59+00:00 85148df36835d6bbdb2e4d06a3322629e4bb12c6 Historically we had several subtypes of 32-bit Qualcomm platforms. Nowadays they became just useless symbols in Kconfig. Drop them and pull corresponding clocksource entries towards top-level ARCH_QCOM entry. Note, I've left ARCH_IPQ40XX, ARCH_MSM8x60 and ARCH_MSM8960 in place, since they have special TEXT_OFFSET handling, which can be sorted out separately. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231216162700.863456-3-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> 
Historically we had several subtypes of 32-bit Qualcomm platforms.
Nowadays they became just useless symbols in Kconfig. Drop them and pull
corresponding clocksource entries towards top-level ARCH_QCOM entry.

Note, I've left ARCH_IPQ40XX, ARCH_MSM8x60 and ARCH_MSM8960 in place,
since they have special TEXT_OFFSET handling, which can be sorted out
separately.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231216162700.863456-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
ARM: mach-qcom: Add support for MSM8909 2022-07-18T23:06:08+00:00 Stephan Gerhold stephan.gerhold@kernkonzept.com 2022-07-05T14:35:23+00:00 2bc7d3e08ec76f5ea88c552ae72ed8ea9bbdcc01 Add a Kconfig entry for MSM8909 and the "qcom,msm8909-smp" CPU enable-method. The ARM Cortex-A7 cores are booted just like on MSM8226. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220705143523.3390944-9-stephan.gerhold@kernkonzept.com 
Add a Kconfig entry for MSM8909 and the "qcom,msm8909-smp" CPU
enable-method. The ARM Cortex-A7 cores are booted just like on MSM8226.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-9-stephan.gerhold@kernkonzept.com
ARM: rework endianess selection 2022-04-08T15:20:54+00:00 Arnd Bergmann arnd@arndb.de 2022-04-04T09:52:31+00:00 5d6f52671e76ca2d55d74e676ac4c38ceb14a2d3 Choosing big-endian vs little-endian kernels in Kconfig has not worked correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long time ago. The problems is that CONFIG_BIG_ENDIAN depends on ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform in the config, but would actually have to be supported by all of them. This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and tend to just work aside from problems in nonportable device drivers. For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM were never set together, so this was disabled on all those machines except for IXP4xx. As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to formalize this logic: all ARMv4/v5 platforms get an explicit dependency on being either big-endian (ixp4xx) or little-endian (the rest). We may want to fix ixp4xx in the future to support both, but it does not work in LE mode at the moment. For the ARMv6/v7 platforms, there are two ways this could be handled a) allow both modes only for platforms selecting 'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the others, given that these were added intentionally at some point. b) allow both modes everwhere, given that it was already possible to build that way by e.g. selecting ARCH_VIRT, and that the list is not an accurate reflection of which platforms may or may not work. Out of these, I picked b) because it seemed slighly more logical to me. Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Choosing big-endian vs little-endian kernels in Kconfig has not worked
correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long
time ago.

The problems is that CONFIG_BIG_ENDIAN depends on
ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform
in the config, but would actually have to be supported by all
of them.

This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and
tend to just work aside from problems in nonportable device drivers.
For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM
were never set together, so this was disabled on all those machines
except for IXP4xx.

As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to
formalize this logic: all ARMv4/v5 platforms get an explicit dependency
on being either big-endian (ixp4xx) or little-endian (the rest). We may
want to fix ixp4xx in the future to support both, but it does not work
in LE mode at the moment.

For the ARMv6/v7 platforms, there are two ways this could be handled

 a) allow both modes only for platforms selecting
    'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the
    others, given that these were added intentionally at some
    point.

 b) allow both modes everwhere, given that it was already possible
    to build that way by e.g. selecting ARCH_VIRT, and that the
    list is not an accurate reflection of which platforms may or
    may not work.

Out of these, I picked b) because it seemed slighly more logical
to me.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: qcom: Add ARCH_MSM8916 for MSM8916 on ARM32 2021-10-24T03:23:03+00:00 Stephan Gerhold stephan@gerhold.net 2021-10-04T20:49:47+00:00 48cc39c32b992be00236c4172b5e892de0219f93 Add a CONFIG_ARCH_MSM8916 option to enable building MSM8916 support on ARM32. Note that since ARM64 is the main supported architecture for MSM8916 this is only intended for testing and for devices where signed firmware does not allow booting ARM64 kernels. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004204955.21077-7-stephan@gerhold.net 
Add a CONFIG_ARCH_MSM8916 option to enable building MSM8916 support
on ARM32. Note that since ARM64 is the main supported architecture
for MSM8916 this is only intended for testing and for devices where
signed firmware does not allow booting ARM64 kernels.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-7-stephan@gerhold.net
ARM: qcom: Add support for IPQ40xx 2020-03-31T19:03:27+00:00 Christian Lamparter chunkeey@gmail.com 2020-01-06T13:57:15+00:00 f125e2d4339dda6937865f975470b29c84714c9b Add support for the Qualcomm IPQ40xx SoC in Kconfig. Also add its appropriate textofs. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: John Crispin <john@phrozen.org> Tested-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Add support for the Qualcomm IPQ40xx SoC in Kconfig.
Also add its appropriate textofs.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Tested-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21T08:50:46+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-19T12:07:45+00:00 ec8f24b7faaf3d4799a7c3f4c1b87f6b02778ad1 Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: qcom: Add support for MDM9615 2016-06-25T03:57:23+00:00 Neil Armstrong narmstrong@baylibre.com 2016-06-17T10:31:23+00:00 78700c0a2102dbe0fb35b6c146a639dc4622036f Add support for Qualcomm MDM9615 in Kconfig and in DT match list. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andy Gross <andy.gross@linaro.org> 
Add support for Qualcomm MDM9615 in Kconfig and in DT match list.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
ARM: use "depends on" for SoC configs instead of "if" after prompt 2015-12-01T21:44:51+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2015-11-16T03:06:10+00:00 e324654294907a420ab3773efe8849a935f37bf0 Many ARM sub-architectures use prompts followed by "if" conditional, but it is wrong. Please notice the difference between config ARCH_FOO bool "Foo SoCs" if ARCH_MULTI_V7 and config ARCH_FOO bool "Foo SoCs" depends on ARCH_MULTI_V7 These two are *not* equivalent! In the former statement, it is not ARCH_FOO, but its prompt that depends on ARCH_MULTI_V7. So, it is completely valid that ARCH_FOO is selected by another, but ARCH_MULTI_V7 is still disabled. As it is not unmet dependency, Kconfig never warns. This is probably not what you want. The former should be used only when you need to do so, and you really understand what you are doing. (In most cases, it should be wrong!) For enabling/disabling sub-architectures, the latter is always correct. As a good side effect, this commit fixes some entries over 80 columns (mach-imx, mach-integrator, mach-mbevu). [Arnd: I note that there is not really a bug here, according to the discussion that followed, but I can see value in being consistent and in making the lines shorter] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jun Nie <jun.nie@linaro.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Halasa <khc@piap.pl> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Many ARM sub-architectures use prompts followed by "if" conditional,
but it is wrong.

Please notice the difference between

    config ARCH_FOO
            bool "Foo SoCs" if ARCH_MULTI_V7

and

    config ARCH_FOO
            bool "Foo SoCs"
            depends on ARCH_MULTI_V7

These two are *not* equivalent!

In the former statement, it is not ARCH_FOO, but its prompt that
depends on ARCH_MULTI_V7.  So, it is completely valid that ARCH_FOO
is selected by another, but ARCH_MULTI_V7 is still disabled. As it is
not unmet dependency, Kconfig never warns.  This is probably not what
you want.

The former should be used only when you need to do so, and you really
understand what you are doing.  (In most cases, it should be wrong!)

For enabling/disabling sub-architectures, the latter is always correct.

As a good side effect, this commit fixes some entries over 80 columns
(mach-imx, mach-integrator, mach-mbevu).

[Arnd: I note that there is not really a bug here, according to
 the discussion that followed, but I can see value in being consistent
 and in making the lines shorter]

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Krzysztof Halasa <khc@piap.pl>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
firmware: qcom: scm: Move the scm driver to drivers/firmware 2015-03-11T20:06:38+00:00 Kumar Gala galak@codeaurora.org 2015-02-26T21:49:09+00:00 916f743da3546c28a2f350d197e3bea95d97ba15 Architectural changes in the ARM Linux kernel tree mandate the eventual removal of the mach-* directories. Move the scm driver to drivers/firmware and the scm header to include/linux to support that removal. Signed-off-by: Kumar Gala <galak@codeaurora.org> 
Architectural changes in the ARM Linux kernel tree mandate the eventual
removal of the mach-* directories. Move the scm driver to
drivers/firmware and the scm header to include/linux to support that
removal.

Signed-off-by: Kumar Gala <galak@codeaurora.org>