linux-toradex.git/arch/arm/plat-omap/include, branch v4.1

ARM: OMAP: dmtimer: raw read and write endian fix

2014-05-08T14:09:54+00:00

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky 
Signed-off-by: Taras Kondratiuk 
Signed-off-by: Tony Lindgren

Merge tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux into next/cleanup

2014-02-19T06:19:33+00:00

This cleanup series gets rid of  for platforms not using
ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since
387798b (ARM: initial multiplatform support).)

To make this work some code out of arch/arm needed to be adapted. The
respective changes got acks by their maintainers to be taken via armsoc
(with Andrew Morton substituting for Alessandro Zummo as rtc maintainer).

Compared to the previous pull request there was another patch added that
fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not
squash this fix into the original commit to save him from the need to
reverify the series.

* tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux:
  ARM: ixp4xx: fix timer latch calculation
  ARM: drop  for !ARCH_MULTIPLATFORM, too
  ARM: rpc: stop using 
  ARM: ixp4xx: stop using 
  input: ixp4xx-beeper: don't use symbols from 
  ARM: at91: don't use 
  ARM: ep93xx: stop using mach/timex.h
  ARM: mmp: stop using mach/timex.h
  ARM: netx: stop using mach/timex.h
  ARM: sa1100: stop using mach/timex.h
  clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE
  rtc: pxa: drop unused #define TIMER_FREQ
  rtc: at91sam9: include  explicitly
  ARM/serial: at91: switch atmel serial to use gpiolib

Signed-off-by: Olof Johansson

ARM: drop for !ARCH_MULTIPLATFORM, too

2013-12-20T16:17:16+00:00

While  isn't used for multi-platform builds since long it
still is for "normal" builds. As the previous patches fix all sites to
not make use of this per-platform file, it can go now for good also for
platforms that are not (yet) converted to multi-platform.

While at it there are no users of CLOCK_TICK_RATE any more, so also drop
the dummy #define.

Signed-off-by: Uwe Kleine-König

ARM: OMAP2+: Disable POSTED mode for errata i103 and i767

2013-11-26T23:03:36+00:00

Enabling of Posted mode is seen to cause problems on dmtimer modules on AM33xx
(much like other OMAPs).  Reference discussions on forums [1] [2]. Earlier
patch solving this on other OMAPs [3].

For OMAP SoCs with this errata, the fix has been to not enable Posted mode.
However, on some SoCs (atleast AM33xx) which carry this errata, Posted mode
is enabled on reset. So we not only need to ignore enabling of the POSTED bit
when the timer is requested, but also disable Posted mode if errata is present.

[1] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/285744.aspx
[2] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/270632.aspx
[3] http://www.spinics.net/lists/linux-omap/msg81770.html

Cc: stable@vgerk.kernel.org
Reported-by: Russ Dill 
Cc: Santosh Shilimkar 
Signed-off-by: Joel Fernandes 
Signed-off-by: Tony Lindgren

mailbox/omap: move the OMAP mailbox framework to drivers

2013-06-11T16:41:51+00:00

The mailbox hardware (in OMAP) uses a queued mailbox interrupt
mechanism that provides a communication channel between processors
through a set of registers and their associated interrupt signals
by sending and receiving messages.

The OMAP mailbox framework/driver code is moved to be under
drivers/mailbox, in preparation for adapting to a common mailbox
driver framework. This allows the build for OMAP mailbox to be
enabled (it was disabled during the multi-platform support).

As part of the migration from plat and mach code:
- Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers.
- mailbox.h under plat-omap/plat/include has been split into a public
  and private header files. The public header has only the API related
  functions and types.
- The module name mailbox.ko from plat-omap is changed to
  omap-mailbox.ko
- The module name mailbox_mach.ko from mach-omapX is changed as
    mailbox_omap1.ko for OMAP1
    mailbox_omap2.ko for OMAP2+

Cc: Tony Lindgren 
[gregkh@linuxfoundation.org: ack for staging part]
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Omar Ramirez Luna 
Signed-off-by: Suman Anna

ARM: OMAP2+: mbox: remove dependencies with soc.h

2013-06-11T16:41:29+00:00

The OMAP mailbox platform driver code has been cleaned up to
remove the dependencies with soc.h in preparation for moving
the mailbox code to drivers folder.

The code relied on cpu_is_xxx/soc_is_xxx macros previously to
pick the the right set of mailbox devices and register with the
mailbox driver. This data is now represented in a concise format
and moved to the respective omap_hwmod data files and published
to the driver through the platform data.

Cc: Paul Walmsley 
Signed-off-by: Suman Anna

ARM: OMAP: Add function to request timer by node

2013-04-08T22:21:31+00:00

Add a function so that OMAP dmtimers can be requested by device-tree
node. This allows for devices, such as the internal DSP, or drivers,
such as PWM, to reference a specific dmtimer node via the device-tree.

Given that there are several APIs available for requesting dmtimers
(by ID, by capability or by node) consolidate the code for all these
functions into a single helper function that can be used by these
request functions.

Signed-off-by: Jon Hunter 
Acked-by: Tony Lindgren 
Signed-off-by: Benoit Cousson

Merge tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-03-01T04:00:40+00:00

Pull ARM SoC late OMAP changes from Olof Johansson:
 "This branch contains changes for OMAP that came in late during the
  release staging, close to when the merge window opened.

  It contains, among other things:

   - OMAP PM fixes and some patches for audio device integration
   - OMAP clock fixes related to common clock conversion
   - A set of patches cleaning up WFI entry and blocking.
   - A set of fixes and IP block support for PM on TI AM33xx SoCs
     (Beaglebone, etc)
   - A set of smaller fixes and cleanups around AM33xx restart and
     revision detection, as well as removal of some dead code
     (CONFIG_32K_TIMER_HZ)"

* tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: omap2: include linux/errno.h in hwmod_reset
  ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default
  ARM: OMAP4: hwmod data: Enable AESS hwmod device
  ARM: OMAP4: hwmod data: Update AESS data with memory bank area
  ARM: OMAP4+: AESS: enable internal auto-gating during initial setup
  ASoC: TI AESS: add autogating-enable function, callable from architecture code
  ARM: OMAP2+: hwmod: add enable_preprogram hook
  ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb
  ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init()
  ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug
  ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags
  ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem
  ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries
  ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
  ARM: OMAP2+: AM33XX: Update the hardreset API
  ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit
  ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry
  ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
  ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod
  ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files
  ...

ARM: OMAP2+: Get rid of custom OMAP_32K_TIMER_HZ

2013-02-01T22:51:22+00:00

The timekeeping doesn't depend on HZ value in presence of fine grained
clocksource and hence there should not be any time drift because of HZ
value which was chosen to be divisor of 32768.

OMAP has been using HZ = 128 value to avoid any time drift issues
because of 32768 HZ clock. But with various measurements performed
with HZ = 100, no time drift is observed and it also proves the
point about HZ not having impact on time keeping on OMAP.

Very informative thread on this topic is here:
	https://lkml.org/lkml/2013/1/29/435

Special thanks to John Stulz, Arnd Bergmann and Russell King for their
valuable suggestions.

Cc: Arnd Bergmann 
Cc: Russell King 
Cc: John Stultz 
Cc: Tony Lindgren 

Signed-off-by: Santosh Shilimkar 
Tested-by: Lokesh Vutla 
Signed-off-by: Tony Lindgren

ARM: OMAP: Fix i2c cmdline initcall for multiplatform

2013-01-11T19:24:19+00:00

We only want this initcall to run when the kernel is
booted on omap SoCs. Fix the issue by initializing the
the initcall from separately for omap1 and omap2+.

This fixes the issue for omap2+ multiplatform configs
as we are using omap_subsys_initcall there.

Tested-by: Ezequiel Garcia 
Signed-off-by: Tony Lindgren