[ Upstream commit fbf8f40e1658cb2f17452dbd3c708e329c5d27e0 ]

The erratum fixes the hang of ITS SYNC command by avoiding inter node
io and collections/cpu mapping on thunderx dual-socket platform.

This fix is only applicable for Cavium's ThunderX dual-socket platform.

Reviewed-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 104a0c02e8b1936c049e18a6d4e4ab040fb61213 ]

On ThunderX T88 pass 1.x through 2.1 parts, broadcast TLBI
instructions may cause the icache to become corrupted if it contains
data for a non-current ASID.

This patch implements the workaround (which invalidates the local
icache when switching the mm) by using code patching.

Signed-off-by: Andrew Pinski <apinski@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull arm64 fixes from Catalin Marinas:

 - Build fix when !CONFIG_UID16 (the patch is touching generic files but
   it only affects arm64 builds; submitted by Arnd Bergmann)

 - EFI fixes to deal with early_memremap() returning NULL and correctly
   mapping run-time regions

 - Fix CPUID register extraction of unsigned fields (not to be
   sign-extended)

 - ASID allocator fix to deal with long-running tasks over multiple
   generation roll-overs

 - Revert support for marking page ranges as contiguous PTEs (it leads
   to TLB conflicts and requires additional non-trivial kernel changes)

 - Proper early_alloc() failure check

 - Disable KASan for 48-bit VA and 16KB page configuration (the pgd is
   larger than the KASan shadow memory)

 - Update the fault_info table (original descriptions based on early
   engineering spec)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: efi: fix initcall return values
  arm64: efi: deal with NULL return value of early_memremap()
  arm64: debug: Treat the BRPs/WRPs as unsigned
  arm64: cpufeature: Track unsigned fields
  arm64: cpufeature: Add helpers for extracting unsigned values
  Revert "arm64: Mark kernel page ranges contiguous"
  arm64: mm: keep reserved ASIDs in sync with mm after multiple rollovers
  arm64: KASAN depends on !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
  arm64: efi: correctly map runtime regions
  arm64: mm: fix fault_info table xFSC decoding
  arm64: fix building without CONFIG_UID16
  arm64: early_alloc: Fix check for allocation failure

On KASAN + 16K_PAGES + 48BIT_VA
 arch/arm64/mm/kasan_init.c: In function ‘kasan_early_init’:
 include/linux/compiler.h:484:38: error: call to ‘__compiletime_assert_95’ declared with attribute error: BUILD_BUG_ON failed: !IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE)
    _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)

Currently KASAN will not work on 16K_PAGES and 48BIT_VA, so
forbid such configuration to avoid above build failure.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Suzuki K. Poulose <Suzuki.Poulose@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Cortex-A57 parts up to r1p2 can misreport Stage 2 translation faults
when a Stage 1 permission fault or device alignment fault should
have been reported.

This patch implements the workaround (which is to validate that the
Stage-1 translation actually succeeds) by using code patching.

Cc: stable@vger.kernel.org
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

Pull arm64 fixes and clean-ups from Catalin Marinas:
 "Here's a second pull request for this merging window with some
  fixes/clean-ups:

   - __cmpxchg_double*() return type fix to avoid truncation of a long
     to int and subsequent logical "not" in cmpxchg_double()
     misinterpreting the operation success/failure

   - BPF fixes for mod and div by zero

   - Fix compilation with STRICT_MM_TYPECHECKS enabled

   - VDSO build fix without libgcov

   - Some static and __maybe_unused annotations

   - Kconfig clean-up (FRAME_POINTER)

   - defconfig update for CRYPTO_CRC32_ARM64"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: suspend: make hw_breakpoint_restore static
  arm64: mmu: make split_pud and fixup_executable static
  arm64: smp: make of_parse_and_init_cpus static
  arm64: use linux/types.h in kvm.h
  arm64: build vdso without libgcov
  arm64: mark cpus_have_hwcap as __maybe_unused
  arm64: remove redundant FRAME_POINTER kconfig option and force to select it
  arm64: fix R/O permissions of FDT mapping
  arm64: fix STRICT_MM_TYPECHECKS issue in PTE_CONT manipulation
  arm64: bpf: fix mod-by-zero case
  arm64: bpf: fix div-by-zero case
  arm64: Enable CRYPTO_CRC32_ARM64 in defconfig
  arm64: cmpxchg_dbl: fix return value type

FRAME_POINTER is defined in lib/Kconfig.debug, it is unnecessary to redefine it
in arch/arm64/Kconfig.debug.

ARM64 depends on frame pointer to get correct stack trace (also selecting
ARCH_WANT_FRAME_POINTERS). However, the lib/Kconfig.debug definition allows
such option to be disabled. This patch forces FRAME_POINTER always on on arm64.

Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull iommu updates from Joerg Roedel:
 "This time including:

   - A new IOMMU driver for s390 pci devices

   - Common dma-ops support based on iommu-api for ARM64.  The plan is
     to use this as a basis for ARM32 and hopefully other architectures
     as well in the future.

   - MSI support for ARM-SMMUv3

   - Cleanups and dead code removal in the AMD IOMMU driver

   - Better RMRR handling for the Intel VT-d driver

   - Various other cleanups and small fixes"

* tag 'iommu-updates-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits)
  iommu/vt-d: Fix return value check of parse_ioapics_under_ir()
  iommu/vt-d: Propagate error-value from ir_parse_ioapic_hpet_scope()
  iommu/vt-d: Adjust the return value of the parse_ioapics_under_ir
  iommu: Move default domain allocation to iommu_group_get_for_dev()
  iommu: Remove is_pci_dev() fall-back from iommu_group_get_for_dev
  iommu/arm-smmu: Switch to device_group call-back
  iommu/fsl: Convert to device_group call-back
  iommu: Add device_group call-back to x86 iommu drivers
  iommu: Add generic_device_group() function
  iommu: Export and rename iommu_group_get_for_pci_dev()
  iommu: Revive device_group iommu-ops call-back
  iommu/amd: Remove find_last_devid_on_pci()
  iommu/amd: Remove first/last_device handling
  iommu/amd: Initialize amd_iommu_last_bdf for DEV_ALL
  iommu/amd: Cleanup buffer allocation
  iommu/amd: Remove cmd_buf_size and evt_buf_size from struct amd_iommu
  iommu/amd: Align DTE flag definitions
  iommu/amd: Remove old alias handling code
  iommu/amd: Set alias DTE in do_attach/do_detach
  iommu/amd: WARN when __[attach|detach]_device are called with irqs enabled
  ...

Pull arm64 updates from Catalin Marinas:

 - "genirq: Introduce generic irq migration for cpu hotunplugged" patch
   merged from tip/irq/for-arm to allow the arm64-specific part to be
   upstreamed via the arm64 tree

 - CPU feature detection reworked to cope with heterogeneous systems
   where CPUs may not have exactly the same features.  The features
   reported by the kernel via internal data structures or ELF_HWCAP are
   delayed until all the CPUs are up (and before user space starts)

 - Support for 16KB pages, with the additional bonus of a 36-bit VA
   space, though the latter only depending on EXPERT

 - Implement native {relaxed, acquire, release} atomics for arm64

 - New ASID allocation algorithm which avoids IPI on roll-over, together
   with TLB invalidation optimisations (using local vs global where
   feasible)

 - KASan support for arm64

 - EFI_STUB clean-up and isolation for the kernel proper (required by
   KASan)

 - copy_{to,from,in}_user optimisations (sharing the memcpy template)

 - perf: moving arm64 to the arm32/64 shared PMU framework

 - L1_CACHE_BYTES increased to 128 to accommodate Cavium hardware

 - Support for the contiguous PTE hint on kernel mapping (16 consecutive
   entries may be able to use a single TLB entry)

 - Generic CONFIG_HZ now used on arm64

 - defconfig updates

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (91 commits)
  arm64/efi: fix libstub build under CONFIG_MODVERSIONS
  ARM64: Enable multi-core scheduler support by default
  arm64/efi: move arm64 specific stub C code to libstub
  arm64: page-align sections for DEBUG_RODATA
  arm64: Fix build with CONFIG_ZONE_DMA=n
  arm64: Fix compat register mappings
  arm64: Increase the max granular size
  arm64: remove bogus TASK_SIZE_64 check
  arm64: make Timer Interrupt Frequency selectable
  arm64/mm: use PAGE_ALIGNED instead of IS_ALIGNED
  arm64: cachetype: fix definitions of ICACHEF_* flags
  arm64: cpufeature: declare enable_cpu_capabilities as static
  genirq: Make the cpuhotplug migration code less noisy
  arm64: Constify hwcap name string arrays
  arm64/kvm: Make use of the system wide safe values
  arm64/debug: Make use of the system wide safe value
  arm64: Move FP/ASIMD hwcap handling to common code
  arm64/HWCAP: Use system wide safe values
  arm64/capabilities: Make use of system wide safe value
  arm64: Delay cpu feature capability checks
  ...

It allows a selectable timer interrupt frequency of 100, 250, 300 and 1000 HZ.
We will get better performance when choose a suitable frequency in some scene.

Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>