linux-toradex.git/arch/arm64/Makefile, branch v3.19

arm64: Add dtb files to archclean rule

2015-01-20T11:30:08+00:00

As dts files have been reorganised under vendor subdirs, dtb files
cannot be removed with "make distclean" now. Thus, this patch moves
dtb files under archclean rule and removes unnecessary entries.

Cc: Robert Richter 
Cc: Catalin Marinas 
Cc: Will Deacon 
Signed-off-by: Jungseok Lee 
Signed-off-by: Will Deacon

dts, arm/arm64: Remove dtbs build rules in sub-makes

2014-10-21T16:06:58+00:00

Add dtb files to build targets and let kbuild handle them. Thus,
special dtbs rules can be removed. This eases Makefiles and the
implementation of the support of vendor dtb subdirectories.

Signed-off-by: Robert Richter

dts, kbuild: Factor out dtbs install rules to Makefile.dtbinst

2014-10-21T16:06:58+00:00

Move dtbs install rules to Makefile.dtbinst. This change is needed to
implement support for dts vendor subdirs. The change makes Makefiles
easier and smaller as no longer the dtbs_install rule needs to be
defined. Another advantage is that install goals are not encoded in
targets anymore (%.dtb_dtbinst_).

Signed-off-by: Robert Richter

dts, arm64: Add dtbs_install make target

2014-10-21T16:06:57+00:00

This adds the dtbs_install make target to arm64. The target has been
introduced already to arch/arm with the following commit:

 f4d4ffc03efc kbuild: dtbs_install: new make target

Implementation for arm64 is the same as for arm.

With 'dtbs_install' all config enabled dtb files are installed to
either the INSTALL_DTBS_PATH directory or the default location:

 $INSTALL_PATH/dtbs/$KERNELRELEASE

Signed-off-by: Robert Richter

Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild

2014-10-14T07:22:26+00:00

Pull kbuild changes from Michal Marek:
 - fix for handling dependencies of *-objs targets by Masahiro Yamada
 - lots of cleanups in the kbuild machinery, also by Masahiro
 - fixes for the kconfig build to use an UTF-8 capable ncurses library
   if possible and to build on not-so-standard installs
 - some more minor fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Do not reference *-n variables in the Makefile
  kbuild: simplify build, clean, modbuiltin shorthands
  kbuild: arm: Do not define "comma" twice
  kbuild: remove obj-n and lib-n handling
  kbuild: remove unnecessary variable initializaions
  kbuild: remove unnecessary "obj- := dummy.o" trick
  kbuild: handle C=... and M=... after entering into build directory
  kbuild: use $(Q) for sub-make target
  kbuild: fake the "Entering directory ..." message more simply
  kconfig/lxdialog: get ncurses CFLAGS with pkg-config
  kconfig: nconfig: fix multi-byte UTF handling
  kconfig: lxdialog: fix spelling
  kbuild: Make scripts executable
  kbuild: remove redundant clean-files from scripts/kconfig/Makefile
  kbuild: refactor script/kconfig/Makefile
  kbuild: handle the dependency of multi-objs hostprogs appropriately
  kbuild: handle multi-objs dependency appropriately

kbuild: arm: Do not define "comma" twice

2014-10-02T13:09:47+00:00

The definition of "comma" exists in scripts/Kbuild.include.
We should not double it.

Signed-off-by: Masahiro Yamada 
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Michal Marek

arm64: eBPF JIT compiler

2014-09-08T13:39:21+00:00

The JIT compiler emits A64 instructions. It supports eBPF only.
Legacy BPF is supported thanks to conversion by BPF core.

JIT is enabled in the same way as for other architectures:

	echo 1 > /proc/sys/net/core/bpf_jit_enable

Or for additional compiler output:

	echo 2 > /proc/sys/net/core/bpf_jit_enable

See Documentation/networking/filter.txt for more information.

The implementation passes all 57 tests in lib/test_bpf.c
on ARMv8 Foundation Model :) Also tested by Will on Juno platform.

Signed-off-by: Zi Shen Lim 
Acked-by: Alexei Starovoitov 
Acked-by: Will Deacon 
Signed-off-by: Will Deacon

arm64: align randomized TEXT_OFFSET on 4 kB boundary

2014-08-19T18:26:09+00:00

When booting via UEFI, the kernel Image is loaded at a 4 kB boundary and
the embedded EFI stub is executed in place. The EFI stub relocates the
Image to reside TEXT_OFFSET bytes above a 2 MB boundary, and jumps into
the kernel proper.

In AArch64, PC relative symbol references are emitted using adrp/add or
adrp/ldr pairs, where the offset into a 4 kB page is resolved using a
separate :lo12: relocation. This implicitly assumes that the code will
always be executed at the same relative offset with respect to a 4 kB
boundary, or the references will point to the wrong address.

This means we should link the kernel at a 4 kB aligned base address in
order to remain compatible with the base address the UEFI loader uses
when doing the initial load of Image. So update the code that generates
TEXT_OFFSET to choose a multiple of 4 kB.

At the same time, update the code so it chooses from the interval [0..2MB)
as the author originally intended.

Reviewed-by: Mark Rutland 
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Will Deacon

Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2014-08-05T00:13:50+00:00

Pull EFI changes from Ingo Molnar:
 "Main changes in this cycle are:

   - arm64 efi stub fixes, preservation of FP/SIMD registers across
     firmware calls, and conversion of the EFI stub code into a static
     library - Ard Biesheuvel

   - Xen EFI support - Daniel Kiper

   - Support for autoloading the efivars driver - Lee, Chun-Yi

   - Use the PE/COFF headers in the x86 EFI boot stub to request that
     the stub be loaded with CONFIG_PHYSICAL_ALIGN alignment - Michael
     Brown

   - Consolidate all the x86 EFI quirks into one file - Saurabh Tangri

   - Additional error logging in x86 EFI boot stub - Ulf Winkelvos

   - Support loading initrd above 4G in EFI boot stub - Yinghai Lu

   - EFI reboot patches for ACPI hardware reduced platforms"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  efi/arm64: Handle missing virtual mapping for UEFI System Table
  arch/x86/xen: Silence compiler warnings
  xen: Silence compiler warnings
  x86/efi: Request desired alignment via the PE/COFF headers
  x86/efi: Add better error logging to EFI boot stub
  efi: Autoload efivars
  efi: Update stale locking comment for struct efivars
  arch/x86: Remove efi_set_rtc_mmss()
  arch/x86: Replace plain strings with constants
  xen: Put EFI machinery in place
  xen: Define EFI related stuff
  arch/x86: Remove redundant set_bit(EFI_MEMMAP) call
  arch/x86: Remove redundant set_bit(EFI_SYSTEM_TABLES) call
  efi: Introduce EFI_PARAVIRT flag
  arch/x86: Do not access EFI memory map if it is not available
  efi: Use early_mem*() instead of early_io*()
  arch/ia64: Define early_memunmap()
  x86/reboot: Add EFI reboot quirk for ACPI Hardware Reduced flag
  efi/reboot: Allow powering off machines using EFI
  efi/reboot: Add generic wrapper around EfiResetSystem()
  ...

efi: efistub: Convert into static library

2014-07-18T20:22:19+00:00

This patch changes both x86 and arm64 efistub implementations
from #including shared .c files under drivers/firmware/efi to
building shared code as a static library.

The x86 code uses a stub built into the boot executable which
uncompresses the kernel at boot time. In this case, the library is
linked into the decompressor.

In the arm64 case, the stub is part of the kernel proper so the library
is linked into the kernel proper as well.

Signed-off-by: Ard Biesheuvel 
Signed-off-by: Matt Fleming