linux-toradex.git/arch/arm64/boot/dts/apm, branch v4.4.7 Linux kernel for Apalis and Colibri modules Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2015-11-10T23:06:26+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-11-10T23:06:26+00:00 c0d6fe2f01c475cc137d90607a07578586883df8 Pull ARM DT updates from Olof Johansson: "As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits) ARM: dts: uniphier: add system-bus-controller nodes ARM64: juno: disable NOR flash node by default ARM: dts: uniphier: add outer cache controller nodes arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge ARM: dts: uniphier: add I2C aliases for ProXstream2 boards dts/Makefile: Add build support for LS2080a QDS & RDB board DTS dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards dts/ls2080a: Update Simulator DTS to add support of various peripherals dts/ls2080a: Remove text about writing to Free Software Foundation dts/ls2080a: Update DTSI to add support of various peripherals doc: DTS: Update DWC3 binding to provide reference to generic bindings doc/bindings: Update GPIO devicetree binding documentation for LS2080A Documentation/dts: Move FSL board-specific bindings out of /powerpc Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards arm64: Rename FSL LS2085A SoC support code to LS2080A arm64: Use generic Layerscape SoC family naming ARM: dts: uniphier: add ProXstream2 Vodka board support ARM: dts: uniphier: add ProXstream2 Gentil board support ... 
Pull ARM DT updates from Olof Johansson:
 "As usual, this is the massive branch we have for each release.  Lots
  of various updates and additions of hardware descriptions on existing
  hardware, as well as the usual additions of new boards and SoCs.

  This is also the first release where we've started mixing 64- and
  32-bit DT updates in one branch.

  (Specific details on what's actually here and new is pretty easy to
  tell from the diffstat, so there's little point in duplicating listing
  it here)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits)
  ARM: dts: uniphier: add system-bus-controller nodes
  ARM64: juno: disable NOR flash node by default
  ARM: dts: uniphier: add outer cache controller nodes
  arm64: defconfig: Enable PCI generic host bridge by default
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
  ARM: dts: uniphier: add I2C aliases for ProXstream2 boards
  dts/Makefile: Add build support for LS2080a QDS & RDB board DTS
  dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards
  dts/ls2080a: Update Simulator DTS to add support of various peripherals
  dts/ls2080a: Remove text about writing to Free Software Foundation
  dts/ls2080a: Update DTSI to add support of various peripherals
  doc: DTS: Update DWC3 binding to provide reference to generic bindings
  doc/bindings: Update GPIO devicetree binding documentation for LS2080A
  Documentation/dts: Move FSL board-specific bindings out of /powerpc
  Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards
  arm64: Rename FSL LS2085A SoC support code to LS2080A
  arm64: Use generic Layerscape SoC family naming
  ARM: dts: uniphier: add ProXstream2 Vodka board support
  ARM: dts: uniphier: add ProXstream2 Gentil board support
  ...
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2015-11-04T17:41:05+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-11-04T17:41:05+00:00 b0f85fa11aefc4f3e03306b4cd47f113bd57dcba Pull networking updates from David Miller: Changes of note: 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell. 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from David Ahern. 3) Allow the user to ask for the statistics to be filtered out of ipv4/ipv6 address netlink dumps. From Sowmini Varadhan. 4) More work to pass the network namespace context around deep into various packet path APIs, starting with the netfilter hooks. From Eric W Biederman. 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas Richter. 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng. 7) Support Very High Throughput in wireless MESH code, from Bob Copeland. 8) Allow setting the ageing_time in switchdev/rocker. From Scott Feldman. 9) Properly autoload L2TP type modules, from Stephen Hemminger. 10) Fix and enable offload features by default in 8139cp driver, from David Woodhouse. 11) Support both ipv4 and ipv6 sockets in a single vxlan device, from Jiri Benc. 12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning Opstad. 13) Fix IPSEC flowcache overflows on large systems, from Steffen Klassert. 14) Convert bridging to track VLANs using rhashtable entries rather than a bitmap. From Nikolay Aleksandrov. 15) Make TCP listener handling completely lockless, this is a major accomplishment. Incoming request sockets now live in the established hash table just like any other socket too. From Eric Dumazet. 15) Provide more bridging attributes to netlink, from Nikolay Aleksandrov. 16) Use hash based algorithm for ipv4 multipath routing, this was very long overdue. From Peter Nørlund. 17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann. 18) Allow non-root execution of EBPF programs, from Alexei Starovoitov. 19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This influences the port binding selection logic used by SO_REUSEPORT. 20) Add ipv6 support to VRF, from David Ahern. 21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko. 22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen. 23) Implement RACK loss recovery in TCP, from Yuchung Cheng. 24) Support multipath routes in MPLS, from Roopa Prabhu. 25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric Dumazet. 26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and Sudarsana Kalluru. 27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic Sowa. 28) Support ipv6 geneve tunnels, from John W Linville. 29) Add flood control support to switchdev layer, from Ido Schimmel. 30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from Hannes Frederic Sowa. 31) Support persistent maps and progs in bpf, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits) sh_eth: use DMA barriers switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion net: sched: kill dead code in sch_choke.c irda: Delete an unnecessary check before the function call "irlmp_unregister_service" net: dsa: mv88e6xxx: include DSA ports in VLANs net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports net/core: fix for_each_netdev_feature vlan: Invoke driver vlan hooks only if device is present arcnet/com20020: add LEDS_CLASS dependency bpf, verifier: annotate verbose printer with __printf dp83640: Only wait for timestamps for packets with timestamping enabled. ptp: Change ptp_class to a proper bitmask dp83640: Prune rx timestamp list before reading from it dp83640: Delay scheduled work. dp83640: Include hash in timestamp/packet matching ipv6: fix tunnel error handling net/mlx5e: Fix LSO vlan insertion net/mlx5e: Re-eanble client vlan TX acceleration net/mlx5e: Return error in case mlx5e_set_features() fails net/mlx5e: Don't allow more than max supported channels ... 
Pull networking updates from David Miller:

Changes of note:

 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.

 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
    David Ahern.

 3) Allow the user to ask for the statistics to be filtered out of
    ipv4/ipv6 address netlink dumps.  From Sowmini Varadhan.

 4) More work to pass the network namespace context around deep into
    various packet path APIs, starting with the netfilter hooks.  From
    Eric W Biederman.

 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
    Richter.

 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.

 7) Support Very High Throughput in wireless MESH code, from Bob
    Copeland.

 8) Allow setting the ageing_time in switchdev/rocker.  From Scott
    Feldman.

 9) Properly autoload L2TP type modules, from Stephen Hemminger.

10) Fix and enable offload features by default in 8139cp driver, from
    David Woodhouse.

11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
    Jiri Benc.

12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
    Opstad.

13) Fix IPSEC flowcache overflows on large systems, from Steffen
    Klassert.

14) Convert bridging to track VLANs using rhashtable entries rather than
    a bitmap.  From Nikolay Aleksandrov.

15) Make TCP listener handling completely lockless, this is a major
    accomplishment.  Incoming request sockets now live in the
    established hash table just like any other socket too.

    From Eric Dumazet.

15) Provide more bridging attributes to netlink, from Nikolay
    Aleksandrov.

16) Use hash based algorithm for ipv4 multipath routing, this was very
    long overdue.  From Peter Nørlund.

17) Several y2038 cures, mostly avoiding timespec.  From Arnd Bergmann.

18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.

19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet.  This
    influences the port binding selection logic used by SO_REUSEPORT.

20) Add ipv6 support to VRF, from David Ahern.

21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.

22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.

23) Implement RACK loss recovery in TCP, from Yuchung Cheng.

24) Support multipath routes in MPLS, from Roopa Prabhu.

25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
    Dumazet.

26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
    Sudarsana Kalluru.

27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
    Sowa.

28) Support ipv6 geneve tunnels, from John W Linville.

29) Add flood control support to switchdev layer, from Ido Schimmel.

30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
    Hannes Frederic Sowa.

31) Support persistent maps and progs in bpf, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
  sh_eth: use DMA barriers
  switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
  net: sched: kill dead code in sch_choke.c
  irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
  net: dsa: mv88e6xxx: include DSA ports in VLANs
  net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
  net/core: fix for_each_netdev_feature
  vlan: Invoke driver vlan hooks only if device is present
  arcnet/com20020: add LEDS_CLASS dependency
  bpf, verifier: annotate verbose printer with __printf
  dp83640: Only wait for timestamps for packets with timestamping enabled.
  ptp: Change ptp_class to a proper bitmask
  dp83640: Prune rx timestamp list before reading from it
  dp83640: Delay scheduled work.
  dp83640: Include hash in timestamp/packet matching
  ipv6: fix tunnel error handling
  net/mlx5e: Fix LSO vlan insertion
  net/mlx5e: Re-eanble client vlan TX acceleration
  net/mlx5e: Return error in case mlx5e_set_features() fails
  net/mlx5e: Don't allow more than max supported channels
  ...
arm64, EDAC: Add L3/SoC DT subnodes to the APM X-Gene SoC EDAC node 2015-09-25T13:43:53+00:00 Loc Ho lho@apm.com 2015-09-24T00:41:01+00:00 043cba96915b9728b9d52c04954de5d1ce61be32 Add L3/SoC DT subnodes to the APM X-Gene SoC EDAC node. Signed-off-by: Loc Ho <lho@apm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: devicetree@vger.kernel.org Cc: Duc Dang <dhdang@apm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Iyappan Subramanian <isubramanian@apm.com> Cc: jcm@redhat.com Cc: Keyur Chudgar <kchudgar@apm.com> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: mchehab@osg.samsung.com Cc: patches@apm.com Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rameshwar Prasad Sahu <rsahu@apm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Tanmay Inamdar <tinamdar@apm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Y Vo <yvo@apm.com> Link: http://lkml.kernel.org/r/1443055261-8613-5-git-send-email-lho@apm.com Signed-off-by: Borislav Petkov <bp@suse.de> 
Add L3/SoC DT subnodes to the APM X-Gene SoC EDAC node.

Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: devicetree@vger.kernel.org
Cc: Duc Dang <dhdang@apm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Iyappan Subramanian <isubramanian@apm.com>
Cc: jcm@redhat.com
Cc: Keyur Chudgar <kchudgar@apm.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: mchehab@osg.samsung.com
Cc: patches@apm.com
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rameshwar Prasad Sahu <rsahu@apm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Y Vo <yvo@apm.com>
Link: http://lkml.kernel.org/r/1443055261-8613-5-git-send-email-lho@apm.com
Signed-off-by: Borislav Petkov <bp@suse.de>
arm64: dts: Add poweroff device nodes for APM X-Gene 2 platform 2015-09-16T19:04:25+00:00 Duc Dang dhdang@apm.com 2015-09-01T20:42:16+00:00 1d8d53b62d80dc3a6ae1483891e7d840cd7a51bd This patch adds: + poweroff button device node to support poweroff by power button on APM X-Gene 2 Merlin platform. + syscon poweroff device node to support poweroff feature on APM X-Gene 2 Merlin platform Signed-off-by: Duc Dang <dhdang@apm.com> 
This patch adds:
 + poweroff button device node to support poweroff by
   power button on APM X-Gene 2 Merlin platform.
 + syscon poweroff device node to support poweroff feature
   on APM X-Gene 2 Merlin platform

Signed-off-by: Duc Dang <dhdang@apm.com>
arm64: dts: Add APM X-Gene 2 standby GPIO controller DTS entries 2015-09-16T19:04:25+00:00 Duc Dang dhdang@apm.com 2015-09-01T20:39:27+00:00 5fc86b513fd3a2f19fb267bc2e9cac49c792294e Add standby domain gpio controller for APM X-Gene 2 SoC platforms. Signed-off-by: Duc Dang <dhdang@apm.com> 
Add standby domain gpio controller for APM X-Gene 2 SoC platforms.

Signed-off-by: Duc Dang <dhdang@apm.com>
arm64: dts: Add PMU node for APM X-Gene Storm SOC 2015-09-16T19:04:24+00:00 Feng Kan fkan@apm.com 2015-01-08T00:33:38+00:00 7434f42b8e5ca5d57262ca7ceb856a86e4ade0d4 This patch adds the PMU device tree node for APM X-Gene Storm SOC. Signed-off-by: Vinayak Kale <vkale@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> 
This patch adds the PMU device tree node for APM X-Gene Storm SOC.

Signed-off-by: Vinayak Kale <vkale@apm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
arm64: dts: Add X-Gene v2 reboot driver dts node 2015-09-16T19:04:24+00:00 Duc Dang dhdang@apm.com 2015-08-12T23:37:08+00:00 991c1292f61261180873be430b9bdd50de36055d This patch add dts nodes for X-Gene v2 (APM X-Gene Shadowcat SoC) platforms to use generic SYSCON regmap reset driver for its reset operation. Signed-off-by: Duc Dang <dhdang@apm.com> 
This patch add dts nodes for X-Gene v2 (APM X-Gene Shadowcat SoC)
platforms to use generic SYSCON regmap reset driver for its reset
operation.

Signed-off-by: Duc Dang <dhdang@apm.com>
arm64: dts: add APM Merlin Board device tree 2015-09-16T19:04:24+00:00 Feng Kan fkan@apm.com 2015-05-19T00:56:16+00:00 e144dc5b8fadb1ca6d4c429aeae51a9f51d88b0e This patch adds the support for APM Merlin board. The Merlin board is based on the APM X-Gene Shadowcat SoC. This DTS enables PMU, Ethernet, SATA and Serial. [dhdang: remove pcie0 node] Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Duc Dang <dhdang@apm.com> 
This patch adds the support for APM Merlin board. The Merlin board
is based on the APM X-Gene Shadowcat SoC. This DTS enables PMU,
Ethernet, SATA and Serial.

[dhdang: remove pcie0 node]
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
power: reset: Add syscon poweroff device node for APM X-Gene platform 2015-09-16T19:04:24+00:00 Tai Nguyen ttnguyen@apm.com 2015-08-12T19:32:32+00:00 94d6ba285f561cd4382b2410fcbf8820056de34e This patch adds syscon poweroff device node to support poweroff feature on APM X-Gene Mustang platform Signed-off-by: Tai Nguyen <ttnguyen@apm.com> Tested-by: dann frazier <dann.frazier@canoncial.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> 
This patch adds syscon poweroff device node to support poweroff feature
on APM X-Gene Mustang platform

Signed-off-by: Tai Nguyen <ttnguyen@apm.com>
Tested-by: dann frazier <dann.frazier@canoncial.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
arm64: dts: Add X-Gene reboot driver dts node 2015-09-16T19:04:23+00:00 Feng Kan fkan@apm.com 2015-08-12T00:39:36+00:00 5c3a87e363c09242541620a777d5b73e89b6c245 This patch add dts nodes for X-Gene platforms to use generic SYSCON regmap reset driver for its reset operation. [dhdang: changelog] Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Duc Dang <dhdang@apm.com> 
This patch add dts nodes for X-Gene platforms to use
generic SYSCON regmap reset driver for its reset operation.

[dhdang: changelog]
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Duc Dang <dhdang@apm.com>