Add device tree overlay to enable ICSSG0 dual EMAC support on AM642 EVM.
This overlay enables both ICSSG0 Ethernet interfaces (port0 and port1) in
dual EMAC mode.

Users can combine this with the existing ICSSG1 overlay to enable all four
ICSSG interfaces if needed.

Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20260323090358.632329-2-m-malladi@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Add Zinnia Carrier Board mated with Verdin AM62.

It features 1 x RS232, 1 x RS485, 1 x CAN, 3 x isolated digital I/O,
2 x 1GBit/s Ethernet, a mini PCIe slot with USB / SIM card connector
for a modem, USB and SD card interfaces.

Link: https://www.toradex.com/products/carrier-board/zinnia-carrier-board
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260324093705.26730-5-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Add an overlay to use the PEB-AV-15 AV-Adapter. It's a small expansion board
using a Lontium LT8912B DSI->HDMI bridge and a TLV320AIC3007 audio codec.

Signed-off-by: Dominik Haller <d.haller@phytec.de>
Link: https://patch.msgid.link/20260320212349.420951-6-d.haller@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Add an overlay to use a powertip,ph128800t006-zhc01 10.1" LVDS display.

Signed-off-by: Dominik Haller <d.haller@phytec.de>
Link: https://patch.msgid.link/20260320212349.420951-4-d.haller@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time.

Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20260302122540.1377444-2-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

It's a requirement that DT overlays be applied at build time in order to
validate them as overlays are not validated on their own.

Add the missing TI overlays. Some of the TI overlays have the first part
needed (a "*-dtbs" variable), but not the second part adding the target to
dtb-y/dtb- variable.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
[vigneshr@ti.com: create new target for J721e GESI EVM]
Link: https://patch.msgid.link/20251120141936.190796-1-vigneshr@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Since commit d8c8a575f5aa ("kbuild: Ensure .dtbo targets are applied to
a base .dtb") kbuild will throw a warning for any stray overlays. Add a
new .dtb which will only be build if CONFIG_OF_ALL_DTBS is enabled.

Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20251120080138.2397851-1-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Add missing PHYTEC overlay build targets so they are included in
CONFIG_OF_ALL_DTBS coverage. This ensures all PHYTEC board-overlay
combinations are apply-tested during build time testing.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://patch.msgid.link/20251119123216.1481420-1-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Add the initial board file for the AM62L3's Evaluation Module.

Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://patch.msgid.link/20251105-am62lx-v8-3-496f353e8237@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Add support for Aquila AM69 mated with Clover carrier board.

Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69
Link: https://www.toradex.com/products/carrier-board/clover
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20251111175502.8847-4-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>