[ Upstream commit c415f9e8304a1d235ef118d912f374ee2e46c45d ]

The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core
which fixes some silicon bugs that needed software workarounds
in Version 1.0 that was used on Zynq systems.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4ea2a6be9565455f152c12f80222af1582ede0c7 ]

The patch removes these warnings reported by dtc 1.4:
Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 78ec79bfd59e126e1cb394302bfa531a420b3ecd upstream.

SARADC controller needs to be reset before programming it, otherwise
it will not function properly.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ad1cfdf518976447e6b0d31517bad4e3ebbce6bb upstream.

The 2nd additional region is the GIC virtual cpu interface register
base and size.

As the gic400 of rk3368 says, the cpu interface register map as below

:

-0x0000 GICC_CTRL
.
.
.
-0x00fc GICC_IIDR
-0x1000 GICC_IDR

Obviously, the region size should be greater than 0x1000.
So we should make sure to include the GICC_IDR since the kernel will access
it in some cases.

Fixes: b790c2cab5ca ("arm64: dts: add Rockchip rk3368 core dtsi and board dts for the r88 board")
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[added Fixes and stable-cc]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The GPIO block for ls2080a platform has little endian registers,
the GPIO driver needs this property to read/write registers by
right interface.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Add the "little-endian" property to fix the issue that eSDHC
is not working and dumping out "mmc0: Controller never released
inhibit bit(s)." error messages constantly.

Fixes: 5461597f6ce0 ("dts/ls2080a: Update DTSI to add support of various peripherals")
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Pull ARM DT updates from Olof Johansson:
 "As usual, this is the massive branch we have for each release.  Lots
  of various updates and additions of hardware descriptions on existing
  hardware, as well as the usual additions of new boards and SoCs.

  This is also the first release where we've started mixing 64- and
  32-bit DT updates in one branch.

  (Specific details on what's actually here and new is pretty easy to
  tell from the diffstat, so there's little point in duplicating listing
  it here)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits)
  ARM: dts: uniphier: add system-bus-controller nodes
  ARM64: juno: disable NOR flash node by default
  ARM: dts: uniphier: add outer cache controller nodes
  arm64: defconfig: Enable PCI generic host bridge by default
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
  ARM: dts: uniphier: add I2C aliases for ProXstream2 boards
  dts/Makefile: Add build support for LS2080a QDS & RDB board DTS
  dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards
  dts/ls2080a: Update Simulator DTS to add support of various peripherals
  dts/ls2080a: Remove text about writing to Free Software Foundation
  dts/ls2080a: Update DTSI to add support of various peripherals
  doc: DTS: Update DWC3 binding to provide reference to generic bindings
  doc/bindings: Update GPIO devicetree binding documentation for LS2080A
  Documentation/dts: Move FSL board-specific bindings out of /powerpc
  Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards
  arm64: Rename FSL LS2085A SoC support code to LS2080A
  arm64: Use generic Layerscape SoC family naming
  ARM: dts: uniphier: add ProXstream2 Vodka board support
  ARM: dts: uniphier: add ProXstream2 Gentil board support
  ...

Merging in the few patches I had kept separate from main next/dt, since others
got merged here directly.

* next/arm64:
  arm64: defconfig: Enable PCI generic host bridge by default
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
  arm64: dts: mt8173: Add clocks for SCPSYS unit
  arm64: dts: mt8173: Add subsystem clock controller device nodes
  + Linux 4.3-rc5

Pull DeviceTree updates from Rob Herring:
 "A fairly large (by DT standards) pull request this time with the
  majority being some overdue moving DT binding docs around to
  consolidate similar bindings.

   - DT binding doc consolidation moving similar bindings to common
     locations.  The majority of these are display related which were
     scattered in video/, fb/, drm/, gpu/, and panel/ directories.

   - Add new config option, CONFIG_OF_ALL_DTBS, to enable building all
     dtbs in the tree for most arches with dts files (except powerpc for
     now).

   - OF_IRQ=n fixes for user enabled CONFIG_OF.

   - of_node_put ref counting fixes from Julia Lawall.

   - Common DT binding for wakeup-source and deprecation of all similar
     bindings.

   - DT binding for PXA LCD controller.

   - Allow ignoring failed PCI resource translations in order to ignore
     64-bit addresses on non-LPAE 32-bit kernels.

   - Support setting the NUMA node from DT instead of only from parent
     device.

   - Couple of earlycon DT parsing fixes for address and options"

* tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits)
  MAINTAINERS: update DT binding doc locations
  devicetree: add Sigma Designs vendor prefix
  of: simplify arch_find_n_match_cpu_physical_id() function
  Documentation: arm: Fixed typo in socfpga fpga mgr example
  Documentation: devicetree: fix reference to legacy wakeup properties
  Documentation: devicetree: standardize/consolidate on "wakeup-source" property
  drivers: of: removing assignment of 0 to static variable
  xtensa: enable building of all dtbs
  mips: enable building of all dtbs
  metag: enable building of all dtbs
  metag: use common make variables for dtb builds
  h8300: enable building of all dtbs
  arm64: enable building of all dtbs
  arm: enable building of all dtbs
  arc: enable building of all dtbs
  arc: use common make variables for dtb builds
  of: add config option to enable building of all dtbs
  of/fdt: fix error checking for earlycon address
  of/overlay: add missing of_node_put
  of/platform: add missing of_node_put
  ...

Pull PCI updates from Bjorn Helgaas:
 "Resource management:
   - Add support for Enhanced Allocation devices (Sean O. Stalley)
   - Add Enhanced Allocation register entries (Sean O. Stalley)
   - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
   - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
   - Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
   - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
   - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
   - Expand Enhanced Allocation BAR output (Bjorn Helgaas)
   - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
   - Fix lookup of linux,pci-probe-only property (Marc Zyngier)
   - Add sparc mem64 resource parsing for root bus (Yinghai Lu)

  PCI device hotplug:
   - pciehp: Queue power work requests in dedicated function (Guenter Roeck)

  Driver binding:
   - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)

  Virtualization:
   - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
   - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
   - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
   - Reorder pcibios_sriov_disable() (Alexander Duyck)
   - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
   - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
   - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
   - Don't try to restore VF BARs (Wei Yang)

  MSI:
   - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
   - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
   - Export all remapped MSIs to sysfs attributes (Romain Bezut)
   - Disable MSI on SiS 761 (Ondrej Zary)

  AER:
   - Clear error status registers during enumeration and restore (Taku Izumi)

  Generic host bridge driver:
   - Fix lookup of linux,pci-probe-only property (Marc Zyngier)
   - Allow multiple hosts with different map_bus() methods (David Daney)
   - Pass starting bus number to pci_scan_root_bus() (David Daney)
   - Fix address window calculation for non-zero starting bus (David Daney)

  Altera host bridge driver:
   - Add msi.h to ARM Kbuild (Ley Foon Tan)
   - Add Altera PCIe host controller driver (Ley Foon Tan)
   - Add Altera PCIe MSI driver (Ley Foon Tan)

  APM X-Gene host bridge driver:
   - Remove msi_controller assignment (Duc Dang)

  Broadcom iProc host bridge driver:
   - Fix header comment "Corporation" misspelling (Florian Fainelli)
   - Fix code comment to match code (Ray Jui)
   - Remove unused struct iproc_pcie.irqs[] (Ray Jui)
   - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
   - Fix PCIe reset logic (Ray Jui)
   - Improve link detection logic (Ray Jui)
   - Update PCIe device tree bindings (Ray Jui)
   - Add outbound mapping support (Ray Jui)

  Freescale i.MX6 host bridge driver:
   - Return real error code from imx6_add_pcie_port() (Fabio Estevam)
   - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)

  Freescale Layerscape host bridge driver:
   - Remove ls_pcie_establish_link() (Minghuan Lian)
   - Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
   - Factor out SCFG related function (Minghuan Lian)
   - Update ls_add_pcie_port() (Minghuan Lian)
   - Remove unused fields from struct ls_pcie (Minghuan Lian)
   - Add support for LS1043a and LS2080a (Minghuan Lian)
   - Add ls_pcie_msi_host_init() (Minghuan Lian)

  HiSilicon host bridge driver:
   - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)

  Marvell MVEBU host bridge driver:
   - Return zero for reserved or unimplemented config space (Russell King)
   - Use exact config access size; don't read/modify/write (Russell King)
   - Use of_get_available_child_count() (Russell King)
   - Use for_each_available_child_of_node() to walk child nodes (Russell King)
   - Report full node name when reporting a DT error (Russell King)
   - Use port->name rather than "PCIe%d.%d" (Russell King)
   - Move port parsing and resource claiming to  separate function (Russell King)
   - Fix memory leaks and refcount leaks (Russell King)
   - Split port parsing and resource claiming from  port setup (Russell King)
   - Use gpio_set_value_cansleep() (Russell King)
   - Use devm_kcalloc() to allocate an array (Russell King)
   - Use gpio_desc to carry around gpio (Russell King)
   - Improve clock/reset handling (Russell King)
   - Add PCI Express root complex capability block (Russell King)
   - Remove code restricting accesses to slot 0 (Russell King)

  NVIDIA Tegra host bridge driver:
   - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)

  Renesas R-Car host bridge driver:
   - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
   - Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
   - Make PCI aware of the I/O resources (Phil Edworthy)
   - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
   - Set root bus nr to that provided in DT (Phil Edworthy)
   - Fix I/O offset for multiple host bridges (Phil Edworthy)

  ST Microelectronics SPEAr13xx host bridge driver:
   - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)

  Synopsys DesignWare host bridge driver:
   - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
   - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
   - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
   - Require config accesses to be naturally aligned (Gabriele Paoloni)
   - Make "num-lanes" an optional DT property (Gabriele Paoloni)
   - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
   - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
   - Factor out MSI msg setup (Lucas Stach)
   - Implement multivector MSI IRQ setup (Lucas Stach)
   - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
   - Set up high part of MSI target address (Lucas Stach)
   - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
   - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
   - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
   - Make driver arch-agnostic (Zhou Wang)

  Miscellaneous:
   - Make x86 pci_subsys_init() static (Alexander Kuleshov)
   - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)"

* tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: altera: Add Altera PCIe MSI driver
  PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver
  PCI: layerscape: Add ls_pcie_msi_host_init()
  PCI: layerscape: Add support for LS1043a and LS2080a
  PCI: layerscape: Remove unused fields from struct ls_pcie
  PCI: layerscape: Update ls_add_pcie_port()
  PCI: layerscape: Factor out SCFG related function
  PCI: layerscape: Ignore PCIe controllers in Endpoint mode
  PCI: layerscape: Remove ls_pcie_establish_link()
  PCI: designware: Make "clocks" and "clock-names" optional DT properties
  PCI: designware: Make driver arch-agnostic
  ARM/PCI: Replace pci_sys_data->align_resource with global function pointer
  PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT
  Revert "PCI: designware: Program ATU with untranslated address"
  PCI: designware: Move calculation of bus addresses to DRA7xx
  PCI: designware: Make "num-lanes" an optional DT property
  PCI: designware: Require config accesses to be naturally aligned
  PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces
  PCI: designware: Use exact access size in dw_pcie_cfg_read()
  PCI: spear: Fix dw_pcie_cfg_read/write() usage
  ...