linux-toradex.git/arch/arm64/kernel/efi.c, branch v6.7 Linux kernel for Apalis and Colibri modules Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2023-11-04T01:44:25+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-11-04T01:44:25+00:00 1f24458a1071f006e3f7449c08ae0f12af493923 Pull tty and serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.7-rc1. Included in here are: - console/vgacon cleanups and removals from Arnd - tty core and n_tty cleanups from Jiri - lots of 8250 driver updates and cleanups - sc16is7xx serial driver updates - dt binding updates - first set of port lock wrapers from Thomas for the printk fixes coming in future releases - other small serial and tty core cleanups and updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits) serdev: Replace custom code with device_match_acpi_handle() serdev: Simplify devm_serdev_device_open() function serdev: Make use of device_set_node() tty: n_gsm: add copyright Siemens Mobility GmbH tty: n_gsm: fix race condition in status line change on dead connections serial: core: Fix runtime PM handling for pending tx vgacon: fix mips/sibyte build regression dt-bindings: serial: drop unsupported samsung bindings tty: serial: samsung: drop earlycon support for unsupported platforms tty: 8250: Add note for PX-835 tty: 8250: Fix IS-200 PCI ID comment tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks tty: 8250: Add support for Intashield IX cards tty: 8250: Add support for additional Brainboxes PX cards tty: 8250: Fix up PX-803/PX-857 tty: 8250: Fix port count of PX-257 tty: 8250: Add support for Intashield IS-100 tty: 8250: Add support for Brainboxes UP cards tty: 8250: Add support for additional Brainboxes UC cards tty: 8250: Remove UC-257 and UC-431 ... 
Pull tty and serial updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 6.7-rc1. Included
  in here are:

   - console/vgacon cleanups and removals from Arnd

   - tty core and n_tty cleanups from Jiri

   - lots of 8250 driver updates and cleanups

   - sc16is7xx serial driver updates

   - dt binding updates

   - first set of port lock wrapers from Thomas for the printk fixes
     coming in future releases

   - other small serial and tty core cleanups and updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
  serdev: Replace custom code with device_match_acpi_handle()
  serdev: Simplify devm_serdev_device_open() function
  serdev: Make use of device_set_node()
  tty: n_gsm: add copyright Siemens Mobility GmbH
  tty: n_gsm: fix race condition in status line change on dead connections
  serial: core: Fix runtime PM handling for pending tx
  vgacon: fix mips/sibyte build regression
  dt-bindings: serial: drop unsupported samsung bindings
  tty: serial: samsung: drop earlycon support for unsupported platforms
  tty: 8250: Add note for PX-835
  tty: 8250: Fix IS-200 PCI ID comment
  tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  tty: 8250: Add support for Intashield IX cards
  tty: 8250: Add support for additional Brainboxes PX cards
  tty: 8250: Fix up PX-803/PX-857
  tty: 8250: Fix port count of PX-257
  tty: 8250: Add support for Intashield IS-100
  tty: 8250: Add support for Brainboxes UP cards
  tty: 8250: Add support for additional Brainboxes UC cards
  tty: 8250: Remove UC-257 and UC-431
  ...
efi: move screen_info into efi init code 2023-10-17T14:33:39+00:00 Arnd Bergmann arnd@arndb.de 2023-10-17T09:39:46+00:00 b8466fe82b79215b9ae28623a87c9a937ebd4f80 After the vga console no longer relies on global screen_info, there are only two remaining use cases: - on the x86 architecture, it is used for multiple boot methods (bzImage, EFI, Xen, kexec) to commucate the initial VGA or framebuffer settings to a number of device drivers. - on other architectures, it is only used as part of the EFI stub, and only for the three sysfb framebuffers (simpledrm, simplefb, efifb). Remove the duplicate data structure definitions by moving it into the efi-init.c file that sets it up initially for the EFI case, leaving x86 as an exception that retains its own definition for non-EFI boots. The added #ifdefs here are optional, I added them to further limit the reach of screen_info to configurations that have at least one of the users enabled. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231017093947.3627976-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
After the vga console no longer relies on global screen_info, there are
only two remaining use cases:

 - on the x86 architecture, it is used for multiple boot methods
   (bzImage, EFI, Xen, kexec) to commucate the initial VGA or framebuffer
   settings to a number of device drivers.

 - on other architectures, it is only used as part of the EFI stub,
   and only for the three sysfb framebuffers (simpledrm, simplefb, efifb).

Remove the duplicate data structure definitions by moving it into the
efi-init.c file that sets it up initially for the EFI case, leaving x86
as an exception that retains its own definition for non-EFI boots.

The added #ifdefs here are optional, I added them to further limit the
reach of screen_info to configurations that have at least one of the
users enabled.

Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231017093947.3627976-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_BTI 2023-10-16T13:17:04+00:00 Mark Rutland mark.rutland@arm.com 2023-10-16T10:24:39+00:00 bbbb65770bf44d3eaec5b7784028756b58ea08db In system_supports_bti() we use cpus_have_const_cap() to check for ARM64_HAS_BTI, but this is not necessary and alternative_has_cap_*() or cpus_have_final_*cap() would be preferable. For historical reasons, cpus_have_const_cap() is more complicated than it needs to be. Before cpucaps are finalized, it will perform a bitmap test of the system_cpucaps bitmap, and once cpucaps are finalized it will use an alternative branch. This used to be necessary to handle some race conditions in the window between cpucap detection and the subsequent patching of alternatives and static branches, where different branches could be out-of-sync with one another (or w.r.t. alternative sequences). Now that we use alternative branches instead of static branches, these are all patched atomically w.r.t. one another, and there are only a handful of cases that need special care in the window between cpucap detection and alternative patching. Due to the above, it would be nice to remove cpus_have_const_cap(), and migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(), or cpus_have_cap() depending on when their requirements. This will remove redundant instructions and improve code generation, and will make it easier to determine how each callsite will behave before, during, and after alternative patching. When CONFIG_ARM64_BTI_KERNEL=y, the ARM64_HAS_BTI cpucap is a strict boot cpu feature which is detected and patched early on the boot cpu. All uses guarded by CONFIG_ARM64_BTI_KERNEL happen after the boot CPU has detected ARM64_HAS_BTI and patched boot alternatives, and hence can safely use alternative_has_cap_*() or cpus_have_final_boot_cap(). Regardless of CONFIG_ARM64_BTI_KERNEL, all other uses of ARM64_HAS_BTI happen after system capabilities have been finalized and alternatives have been patched. Hence these can safely use alternative_has_cap_*) or cpus_have_final_cap(). This patch splits system_supports_bti() into system_supports_bti() and system_supports_bti_kernel(), with the former handling where the cpucap affects userspace functionality, and ther latter handling where the cpucap affects kernel functionality. The use of cpus_have_const_cap() is replaced by cpus_have_final_cap() in cpus_have_const_cap, and cpus_have_final_boot_cap() in system_supports_bti_kernel(). This will avoid generating code to test the system_cpucaps bitmap and should be better for all subsequent calls at runtime. The use of cpus_have_final_cap() and cpus_have_final_boot_cap() will make it easier to spot if code is chaanged such that these run before the ARM64_HAS_BTI cpucap is guaranteed to have been finalized. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
In system_supports_bti() we use cpus_have_const_cap() to check for
ARM64_HAS_BTI, but this is not necessary and alternative_has_cap_*() or
cpus_have_final_*cap() would be preferable.

For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.

Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.

When CONFIG_ARM64_BTI_KERNEL=y, the ARM64_HAS_BTI cpucap is a strict
boot cpu feature which is detected and patched early on the boot cpu.
All uses guarded by CONFIG_ARM64_BTI_KERNEL happen after the boot CPU
has detected ARM64_HAS_BTI and patched boot alternatives, and hence can
safely use alternative_has_cap_*() or cpus_have_final_boot_cap().

Regardless of CONFIG_ARM64_BTI_KERNEL, all other uses of ARM64_HAS_BTI
happen after system capabilities have been finalized and alternatives
have been patched. Hence these can safely use alternative_has_cap_*) or
cpus_have_final_cap().

This patch splits system_supports_bti() into system_supports_bti() and
system_supports_bti_kernel(), with the former handling where the cpucap
affects userspace functionality, and ther latter handling where the
cpucap affects kernel functionality. The use of cpus_have_const_cap() is
replaced by cpus_have_final_cap() in cpus_have_const_cap, and
cpus_have_final_boot_cap() in system_supports_bti_kernel(). This will
avoid generating code to test the system_cpucaps bitmap and should be
better for all subsequent calls at runtime. The use of
cpus_have_final_cap() and cpus_have_final_boot_cap() will make it easier
to spot if code is chaanged such that these run before the ARM64_HAS_BTI
cpucap is guaranteed to have been finalized.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm 2023-08-30T20:34:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-08-30T20:34:34+00:00 461f35f014466c4e26dca6be0f431f57297df3f2 Pull drm updates from Dave Airlie: "The drm core grew a new generic gpu virtual address manager, and new execution locking helpers. These are used by nouveau now to provide uAPI support for the userspace Vulkan driver. AMD had a bunch of new IP core support, loads of refactoring around fbdev, but mostly just the usual amount of stuff across the board. core: - fix gfp flags in drmm_kmalloc gpuva: - add new generic GPU VA manager (for nouveau initially) syncobj: - add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl dma-buf: - acquire resv lock for mmap() in exporters - support dma-buf self import automatically - docs fixes backlight: - fix fbdev interactions atomic: - improve logging prime: - remove struct gem_prim_mmap plus driver updates gem: - drm_exec: add locking over multiple GEM objects - fix lockdep checking fbdev: - make fbdev userspace interfaces optional - use linux device instead of fbdev device - use deferred i/o helper macros in various drivers - Make FB core selectable without drivers - Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT - Add helper macros and Kconfig tokens for DMA-allocated framebuffer ttm: - support init_on_free - swapout fixes panel: - panel-edp: Support AUO B116XAB01.4 - Support Visionox R66451 plus DT bindings - ld9040: - Backlight support - magic improved - Kconfig fix - Convert to of_device_get_match_data() - Fix Kconfig dependencies - simple: - Set bpc value to fix warning - Set connector type for AUO T215HVN01 - Support Innolux G156HCE-L01 plus DT bindings - ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings - startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings - sitronix-st7789v: - Support Inanbo T28CP45TN89 plus DT bindings - Support EDT ET028013DMA plus DT bindings - Various cleanups - edp: Add timings for N140HCA-EAC - Allow panels and touchscreens to power sequence together - Fix Innolux G156HCE-L01 LVDS clock bridge: - debugfs for chains support - dw-hdmi: - Improve support for YUV420 bus format - CEC suspend/resume - update EDID on HDMI detect - dw-mipi-dsi: Fix enable/disable of DSI controller - lt9611uxc: Use MODULE_FIRMWARE() - ps8640: Remove broken EDID code - samsung-dsim: Fix command transfer - tc358764: - Handle HS/VS polarity - Use BIT() macro - Various cleanups - adv7511: Fix low refresh rate - anx7625: - Switch to macros instead of hardcoded values - locking fixes - tc358767: fix hardware delays - sitronix-st7789v: - Support panel orientation - Support rotation property - Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings amdgpu: - SDMA 6.1.0 support - HDP 6.1 support - SMUIO 14.0 support - PSP 14.0 support - IH 6.1 support - Lots of checkpatch cleanups - GFX 9.4.3 updates - Add USB PD and IFWI flashing documentation - GPUVM updates - RAS fixes - DRR fixes - FAMS fixes - Virtual display fixes - Soft IH fixes - SMU13 fixes - Rework PSP firmware loading for other IPs - Kernel doc fixes - DCN 3.0.1 fixes - LTTPR fixes - DP MST fixes - DCN 3.1.6 fixes - SMU 13.x fixes - PSP 13.x fixes - SubVP fixes - GC 9.4.3 fixes - Display bandwidth calculation fixes - VCN4 secure submission fixes - Allow building DC on RISC-V - Add visible FB info to bo_print_info - HBR3 fixes - GFX9 MCBP fix - GMC10 vmhub index fix - GMC11 vmhub index fix - Create a new doorbell manager - SR-IOV fixes - initial freesync panel replay support - revert zpos properly until igt regression is fixeed - use TTM to manage doorbell BAR - Expose both current and average power via hwmon if supported amdkfd: - Cleanup CRIU dma-buf handling - Use KIQ to unmap HIQ - GFX 9.4.3 debugger updates - GFX 9.4.2 debugger fixes - Enable cooperative groups fof gfx11 - SVM fixes - Convert older APUs to use dGPU path like newer APUs - Drop IOMMUv2 path as it is no longer used - TBA fix for aldebaran i915: - ICL+ DSI modeset sequence - HDCP improvements - MTL display fixes and cleanups - HSW/BDW PSR1 restored - Init DDI ports in VBT order - General display refactors - Start using plane scale factor for relative data rate - Use shmem for dpt objects - Expose RPS thresholds in sysfs - Apply GuC SLPC min frequency softlimit correctly - Extend Wa_14015795083 to TGL, RKL, DG1 and ADL - Fix a VMA UAF for multi-gt platform - Do not use stolen on MTL due to HW bug - Check HuC and GuC version compatibility on MTL - avoid infinite GPU waits due to premature release of request memory - Fixes and updates for GSC memory allocation - Display SDVO fixes - Take stolen handling out of FBC code - Make i915_coherent_map_type GT-centric - Simplify shmem_create_from_object map_type msm: - SM6125 MDSS support - DPU: SM6125 DPU support - DSI: runtime PM support, burst mode support - DSI PHY: SM6125 support in 14nm DSI PHY driver - GPU: prepare for a7xx - fix a690 firmware - disable relocs on a6xx and newer radeon: - Lots of checkpatch cleanups ast: - improve device-model detection - Represent BMV as virtual connector - Report DP connection status nouveau: - add new exec/bind interface to support Vulkan - document some getparam ioctls - improve VRAM detection - various fixes/cleanups - workraound DPCD issues ivpu: - MMU updates - debugfs support - Support vpu4 virtio: - add sync object support atmel-hlcdc: - Support inverted pixclock polarity etnaviv: - runtime PM cleanups - hang handling fixes exynos: - use fbdev DMA helpers - fix possible NULL ptr dereference komeda: - always attach encoder omapdrm: - use fbdev DMA helpers ingenic: - kconfig regmap fixes loongson: - support display controller mediatek: - Small mtk-dpi cleanups - DisplayPort: support eDP and aux-bus - Fix coverity issues - Fix potential memory leak if vmap() fail mgag200: - minor fixes mxsfb: - support disabling overlay planes panfrost: - fix sync in IRQ handling ssd130x: - Support per-controller default resolution plus DT bindings - Reduce memory-allocation overhead - Improve intermediate buffer size computation - Fix allocation of temporary buffers - Fix pitch computation - Fix shadow plane allocation tegra: - use fbdev DMA helpers - Convert to devm_platform_ioremap_resource() - support bridge/connector - enable PM tidss: - Support TI AM625 plus DT bindings - Implement new connector model plus driver updates vkms: - improve write back support - docs fixes - support gamma LUT zynqmp-dpsub: - misc fixes" * tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits) drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map() drm/tests/drm_kunit_helpers: Place correct function name in the comment header drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly drm/nouveau: uvmm: fix unset region pointer on remap drm/nouveau: sched: avoid job races between entities drm/i915: Fix HPD polling, reenabling the output poll work as needed drm: Add an HPD poll helper to reschedule the poll work drm/i915: Fix TLB-Invalidation seqno store drm/ttm/tests: Fix type conversion in ttm_pool_test drm/msm/a6xx: Bail out early if setting GPU OOB fails drm/msm/a6xx: Move LLC accessors to the common header drm/msm/a6xx: Introduce a6xx_llc_read drm/ttm/tests: Require MMU when testing drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0"" drm/amdgpu: Add memory vendor information drm/amd: flush any delayed gfxoff on suspend entry drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix drm/amdgpu: Remove gfxoff check in GFX v9.4.3 drm/amd/pm: Update pci link speed for smu v13.0.6 ... 
Pull drm updates from Dave Airlie:
 "The drm core grew a new generic gpu virtual address manager, and new
  execution locking helpers. These are used by nouveau now to provide
  uAPI support for the userspace Vulkan driver. AMD had a bunch of new
  IP core support, loads of refactoring around fbdev, but mostly just
  the usual amount of stuff across the board.

  core:
   - fix gfp flags in drmm_kmalloc

  gpuva:
   - add new generic GPU VA manager (for nouveau initially)

  syncobj:
   - add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl

  dma-buf:
   - acquire resv lock for mmap() in exporters
   - support dma-buf self import automatically
   - docs fixes

  backlight:
   - fix fbdev interactions

  atomic:
   - improve logging

  prime:
   - remove struct gem_prim_mmap plus driver updates

  gem:
   - drm_exec: add locking over multiple GEM objects
   - fix lockdep checking

  fbdev:
   - make fbdev userspace interfaces optional
   - use linux device instead of fbdev device
   - use deferred i/o helper macros in various drivers
   - Make FB core selectable without drivers
   - Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
   - Add helper macros and Kconfig tokens for DMA-allocated framebuffer

  ttm:
   - support init_on_free
   - swapout fixes

  panel:
   - panel-edp: Support AUO B116XAB01.4
   - Support Visionox R66451 plus DT bindings
   - ld9040:
      - Backlight support
      - magic improved
      - Kconfig fix
   - Convert to of_device_get_match_data()
   - Fix Kconfig dependencies
   - simple:
      - Set bpc value to fix warning
      - Set connector type for AUO T215HVN01
      - Support Innolux G156HCE-L01 plus DT bindings
   - ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
   - startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
   - sitronix-st7789v:
      - Support Inanbo T28CP45TN89 plus DT bindings
      - Support EDT ET028013DMA plus DT bindings
      - Various cleanups
   - edp: Add timings for N140HCA-EAC
   - Allow panels and touchscreens to power sequence together
   - Fix Innolux G156HCE-L01 LVDS clock

  bridge:
   - debugfs for chains support
   - dw-hdmi:
      - Improve support for YUV420 bus format
      - CEC suspend/resume
      - update EDID on HDMI detect
   - dw-mipi-dsi: Fix enable/disable of DSI controller
   - lt9611uxc: Use MODULE_FIRMWARE()
   - ps8640: Remove broken EDID code
   - samsung-dsim: Fix command transfer
   - tc358764:
      - Handle HS/VS polarity
      - Use BIT() macro
      - Various cleanups
   - adv7511: Fix low refresh rate
   - anx7625:
      - Switch to macros instead of hardcoded values
      - locking fixes
   - tc358767: fix hardware delays
   - sitronix-st7789v:
      - Support panel orientation
      - Support rotation property
      - Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings

  amdgpu:
   - SDMA 6.1.0 support
   - HDP 6.1 support
   - SMUIO 14.0 support
   - PSP 14.0 support
   - IH 6.1 support
   - Lots of checkpatch cleanups
   - GFX 9.4.3 updates
   - Add USB PD and IFWI flashing documentation
   - GPUVM updates
   - RAS fixes
   - DRR fixes
   - FAMS fixes
   - Virtual display fixes
   - Soft IH fixes
   - SMU13 fixes
   - Rework PSP firmware loading for other IPs
   - Kernel doc fixes
   - DCN 3.0.1 fixes
   - LTTPR fixes
   - DP MST fixes
   - DCN 3.1.6 fixes
   - SMU 13.x fixes
   - PSP 13.x fixes
   - SubVP fixes
   - GC 9.4.3 fixes
   - Display bandwidth calculation fixes
   - VCN4 secure submission fixes
   - Allow building DC on RISC-V
   - Add visible FB info to bo_print_info
   - HBR3 fixes
   - GFX9 MCBP fix
   - GMC10 vmhub index fix
   - GMC11 vmhub index fix
   - Create a new doorbell manager
   - SR-IOV fixes
   - initial freesync panel replay support
   - revert zpos properly until igt regression is fixeed
   - use TTM to manage doorbell BAR
   - Expose both current and average power via hwmon if supported

  amdkfd:
   - Cleanup CRIU dma-buf handling
   - Use KIQ to unmap HIQ
   - GFX 9.4.3 debugger updates
   - GFX 9.4.2 debugger fixes
   - Enable cooperative groups fof gfx11
   - SVM fixes
   - Convert older APUs to use dGPU path like newer APUs
   - Drop IOMMUv2 path as it is no longer used
   - TBA fix for aldebaran

  i915:
   - ICL+ DSI modeset sequence
   - HDCP improvements
   - MTL display fixes and cleanups
   - HSW/BDW PSR1 restored
   - Init DDI ports in VBT order
   - General display refactors
   - Start using plane scale factor for relative data rate
   - Use shmem for dpt objects
   - Expose RPS thresholds in sysfs
   - Apply GuC SLPC min frequency softlimit correctly
   - Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
   - Fix a VMA UAF for multi-gt platform
   - Do not use stolen on MTL due to HW bug
   - Check HuC and GuC version compatibility on MTL
   - avoid infinite GPU waits due to premature release of request memory
   - Fixes and updates for GSC memory allocation
   - Display SDVO fixes
   - Take stolen handling out of FBC code
   - Make i915_coherent_map_type GT-centric
   - Simplify shmem_create_from_object map_type

  msm:
   - SM6125 MDSS support
   - DPU: SM6125 DPU support
   - DSI: runtime PM support, burst mode support
   - DSI PHY: SM6125 support in 14nm DSI PHY driver
   - GPU: prepare for a7xx
   - fix a690 firmware
   - disable relocs on a6xx and newer

  radeon:
   - Lots of checkpatch cleanups

  ast:
   - improve device-model detection
   - Represent BMV as virtual connector
   - Report DP connection status

  nouveau:
   - add new exec/bind interface to support Vulkan
   - document some getparam ioctls
   - improve VRAM detection
   - various fixes/cleanups
   - workraound DPCD issues

  ivpu:
   - MMU updates
   - debugfs support
   - Support vpu4

  virtio:
   - add sync object support

  atmel-hlcdc:
   - Support inverted pixclock polarity

  etnaviv:
   - runtime PM cleanups
   - hang handling fixes

  exynos:
   - use fbdev DMA helpers
   - fix possible NULL ptr dereference

  komeda:
   - always attach encoder

  omapdrm:
   - use fbdev DMA helpers
ingenic:
   - kconfig regmap fixes

  loongson:
   - support display controller

  mediatek:
   - Small mtk-dpi cleanups
   - DisplayPort: support eDP and aux-bus
   - Fix coverity issues
   - Fix potential memory leak if vmap() fail

  mgag200:
   - minor fixes

  mxsfb:
   - support disabling overlay planes

  panfrost:
   - fix sync in IRQ handling

  ssd130x:
   - Support per-controller default resolution plus DT bindings
   - Reduce memory-allocation overhead
   - Improve intermediate buffer size computation
   - Fix allocation of temporary buffers
   - Fix pitch computation
   - Fix shadow plane allocation

  tegra:
   - use fbdev DMA helpers
   - Convert to devm_platform_ioremap_resource()
   - support bridge/connector
   - enable PM

  tidss:
   - Support TI AM625 plus DT bindings
   - Implement new connector model plus driver updates

  vkms:
   - improve write back support
   - docs fixes
   - support gamma LUT

  zynqmp-dpsub:
   - misc fixes"

* tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits)
  drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()
  drm/tests/drm_kunit_helpers: Place correct function name in the comment header
  drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly
  drm/nouveau: uvmm: fix unset region pointer on remap
  drm/nouveau: sched: avoid job races between entities
  drm/i915: Fix HPD polling, reenabling the output poll work as needed
  drm: Add an HPD poll helper to reschedule the poll work
  drm/i915: Fix TLB-Invalidation seqno store
  drm/ttm/tests: Fix type conversion in ttm_pool_test
  drm/msm/a6xx: Bail out early if setting GPU OOB fails
  drm/msm/a6xx: Move LLC accessors to the common header
  drm/msm/a6xx: Introduce a6xx_llc_read
  drm/ttm/tests: Require MMU when testing
  drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock
  Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
  drm/amdgpu: Add memory vendor information
  drm/amd: flush any delayed gfxoff on suspend entry
  drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
  drm/amdgpu: Remove gfxoff check in GFX v9.4.3
  drm/amd/pm: Update pci link speed for smu v13.0.6
  ...
efi/arm64: Move EFI runtime call setup/teardown helpers out of line 2023-08-21T15:49:16+00:00 Ard Biesheuvel ardb@kernel.org 2023-08-08T07:46:03+00:00 c37ce23591b14545f7c8b09e167b995f8acdda71 Only the arch_efi_call_virt() macro that some architectures override needs to be a macro, given that it is variadic and encapsulates calls via function pointers that have different prototypes. The associated setup and teardown code are not special in this regard, and don't need to be instantiated at each call site. So turn them into ordinary C functions and move them out of line. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> 
Only the arch_efi_call_virt() macro that some architectures override
needs to be a macro, given that it is variadic and encapsulates calls
via function pointers that have different prototypes.

The associated setup and teardown code are not special in this regard,
and don't need to be instantiated at each call site. So turn them into
ordinary C functions and move them out of line.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
efi: Do not include <linux/screen_info.h> from EFI header 2023-07-08T18:26:36+00:00 Thomas Zimmermann tzimmermann@suse.de 2023-07-06T10:42:14+00:00 8b0d13545b091729e0aa05ff9981e2d06c1e2ee5 The header file <linux/efi.h> does not need anything from <linux/screen_info.h>. Declare struct screen_info and remove the include statements. Update a number of source files that require struct screen_info's definition. v2: * update loongarch (Jingfeng) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230706104852.27451-2-tzimmermann@suse.de 
The header file <linux/efi.h> does not need anything from
<linux/screen_info.h>. Declare struct screen_info and remove
the include statements. Update a number of source files that
require struct screen_info's definition.

v2:
	* update loongarch (Jingfeng)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706104852.27451-2-tzimmermann@suse.de
Merge tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi 2023-02-23T22:41:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-23T22:41:48+00:00 06e1a81c4806d0b7f75f9d742ebf410718244e03 Pull EFI updates from Ard Biesheuvel: "A healthy mix of EFI contributions this time: - Performance tweaks for efifb earlycon (Andy) - Preparatory refactoring and cleanup work in the efivar layer, which is needed to accommodate the Snapdragon arm64 laptops that expose their EFI variable store via a TEE secure world API (Johan) - Enhancements to the EFI memory map handling so that Xen dom0 can safely access EFI configuration tables (Demi Marie) - Wire up the newly introduced IBT/BTI flag in the EFI memory attributes table, so that firmware that is generated with ENDBR/BTI landing pads will be mapped with enforcement enabled - Clean up how we check and print the EFI revision exposed by the firmware - Incorporate EFI memory attributes protocol definition and wire it up in the EFI zboot code (Evgeniy) This ensures that these images can execute under new and stricter rules regarding the default memory permissions for EFI page allocations (More work is in progress here) - CPER header cleanup (Dan Williams) - Use a raw spinlock to protect the EFI runtime services stack on arm64 to ensure the correct semantics under -rt (Pierre) - EFI framebuffer quirk for Lenovo Ideapad (Darrell)" * tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits) firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3 arm64: efi: Make efi_rt_lock a raw_spinlock efi: Add mixed-mode thunk recipe for GetMemoryAttributes efi: x86: Wire up IBT annotation in memory attributes table efi: arm64: Wire up BTI annotation in memory attributes table efi: Discover BTI support in runtime services regions efi/cper, cxl: Remove cxl_err.h efi: Use standard format for printing the EFI revision efi: Drop minimum EFI version check at boot efi: zboot: Use EFI protocol to remap code/data with the right attributes efi/libstub: Add memory attribute protocol definitions efi: efivars: prevent double registration efi: verify that variable services are supported efivarfs: always register filesystem efi: efivars: add efivars printk prefix efi: Warn if trying to reserve memory under Xen efi: Actually enable the ESRT under Xen efi: Apply allowlist to EFI configuration tables when running under Xen efi: xen: Implement memory descriptor lookup based on hypercall efi: memmap: Disregard bogus entries instead of returning them ... 
Pull EFI updates from Ard Biesheuvel:
 "A healthy mix of EFI contributions this time:

   - Performance tweaks for efifb earlycon (Andy)

   - Preparatory refactoring and cleanup work in the efivar layer, which
     is needed to accommodate the Snapdragon arm64 laptops that expose
     their EFI variable store via a TEE secure world API (Johan)

   - Enhancements to the EFI memory map handling so that Xen dom0 can
     safely access EFI configuration tables (Demi Marie)

   - Wire up the newly introduced IBT/BTI flag in the EFI memory
     attributes table, so that firmware that is generated with ENDBR/BTI
     landing pads will be mapped with enforcement enabled

   - Clean up how we check and print the EFI revision exposed by the
     firmware

   - Incorporate EFI memory attributes protocol definition and wire it
     up in the EFI zboot code (Evgeniy)

     This ensures that these images can execute under new and stricter
     rules regarding the default memory permissions for EFI page
     allocations (More work is in progress here)

   - CPER header cleanup (Dan Williams)

   - Use a raw spinlock to protect the EFI runtime services stack on
     arm64 to ensure the correct semantics under -rt (Pierre)

   - EFI framebuffer quirk for Lenovo Ideapad (Darrell)"

* tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
  firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
  arm64: efi: Make efi_rt_lock a raw_spinlock
  efi: Add mixed-mode thunk recipe for GetMemoryAttributes
  efi: x86: Wire up IBT annotation in memory attributes table
  efi: arm64: Wire up BTI annotation in memory attributes table
  efi: Discover BTI support in runtime services regions
  efi/cper, cxl: Remove cxl_err.h
  efi: Use standard format for printing the EFI revision
  efi: Drop minimum EFI version check at boot
  efi: zboot: Use EFI protocol to remap code/data with the right attributes
  efi/libstub: Add memory attribute protocol definitions
  efi: efivars: prevent double registration
  efi: verify that variable services are supported
  efivarfs: always register filesystem
  efi: efivars: add efivars printk prefix
  efi: Warn if trying to reserve memory under Xen
  efi: Actually enable the ESRT under Xen
  efi: Apply allowlist to EFI configuration tables when running under Xen
  efi: xen: Implement memory descriptor lookup based on hypercall
  efi: memmap: Disregard bogus entries instead of returning them
  ...
arm64: efi: Make efi_rt_lock a raw_spinlock 2023-02-19T13:40:35+00:00 Pierre Gondois pierre.gondois@arm.com 2023-02-15T16:10:47+00:00 0e68b5517d3767562889f1d83fdb828c26adb24f Running a rt-kernel base on 6.2.0-rc3-rt1 on an Ampere Altra outputs the following: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: kworker/u320:0 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by kworker/u320:0/9: #0: ffff3fff8c27d128 ((wq_completion)efi_rts_wq){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41) #1: ffff80000861bdd0 ((work_completion)(&efi_rts_work.work)){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41) #2: ffffdf7e1ed3e460 (efi_rt_lock){+.+.}-{3:3}, at: efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101) Preemption disabled at: efi_virtmap_load (./arch/arm64/include/asm/mmu_context.h:248) CPU: 0 PID: 9 Comm: kworker/u320:0 Tainted: G W 6.2.0-rc3-rt1 Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18 Workqueue: efi_rts_wq efi_call_rts Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:158) show_stack (arch/arm64/kernel/stacktrace.c:165) dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) dump_stack (lib/dump_stack.c:114) __might_resched (kernel/sched/core.c:10134) rt_spin_lock (kernel/locking/rtmutex.c:1769 (discriminator 4)) efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101) [...] This seems to come from commit ff7a167961d1 ("arm64: efi: Execute runtime services from a dedicated stack") which adds a spinlock. This spinlock is taken through: efi_call_rts() \-efi_call_virt() \-efi_call_virt_pointer() \-arch_efi_call_virt_setup() Make 'efi_rt_lock' a raw_spinlock to avoid being preempted. [ardb: The EFI runtime services are called with a different set of translation tables, and are permitted to use the SIMD registers. The context switch code preserves/restores neither, and so EFI calls must be made with preemption disabled, rather than only disabling migration.] Fixes: ff7a167961d1 ("arm64: efi: Execute runtime services from a dedicated stack") Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Cc: <stable@vger.kernel.org> # v6.1+ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> 
Running a rt-kernel base on 6.2.0-rc3-rt1 on an Ampere Altra outputs
the following:
  BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
  in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: kworker/u320:0
  preempt_count: 2, expected: 0
  RCU nest depth: 0, expected: 0
  3 locks held by kworker/u320:0/9:
  #0: ffff3fff8c27d128 ((wq_completion)efi_rts_wq){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
  #1: ffff80000861bdd0 ((work_completion)(&efi_rts_work.work)){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
  #2: ffffdf7e1ed3e460 (efi_rt_lock){+.+.}-{3:3}, at: efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
  Preemption disabled at:
  efi_virtmap_load (./arch/arm64/include/asm/mmu_context.h:248)
  CPU: 0 PID: 9 Comm: kworker/u320:0 Tainted: G        W          6.2.0-rc3-rt1
  Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18
  Workqueue: efi_rts_wq efi_call_rts
  Call trace:
  dump_backtrace (arch/arm64/kernel/stacktrace.c:158)
  show_stack (arch/arm64/kernel/stacktrace.c:165)
  dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
  dump_stack (lib/dump_stack.c:114)
  __might_resched (kernel/sched/core.c:10134)
  rt_spin_lock (kernel/locking/rtmutex.c:1769 (discriminator 4))
  efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
  [...]

This seems to come from commit ff7a167961d1 ("arm64: efi: Execute
runtime services from a dedicated stack") which adds a spinlock. This
spinlock is taken through:
efi_call_rts()
\-efi_call_virt()
  \-efi_call_virt_pointer()
    \-arch_efi_call_virt_setup()

Make 'efi_rt_lock' a raw_spinlock to avoid being preempted.

[ardb: The EFI runtime services are called with a different set of
       translation tables, and are permitted to use the SIMD registers.
       The context switch code preserves/restores neither, and so EFI
       calls must be made with preemption disabled, rather than only
       disabling migration.]

Fixes: ff7a167961d1 ("arm64: efi: Execute runtime services from a dedicated stack")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
efi: arm64: Wire up BTI annotation in memory attributes table 2023-02-09T16:39:16+00:00 Ard Biesheuvel ardb@kernel.org 2023-02-01T08:50:07+00:00 1d959312e2f23c8ee6ed9432a6fa4416b267477b UEFI v2.10 extends the EFI memory attributes table with a flag that indicates whether or not all RuntimeServicesCode regions were constructed with BTI landing pads, permitting the OS to map these regions with BTI restrictions enabled. So let's take this into account on arm64. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Will Deacon <will@kernel.org> 
UEFI v2.10 extends the EFI memory attributes table with a flag that
indicates whether or not all RuntimeServicesCode regions were
constructed with BTI landing pads, permitting the OS to map these
regions with BTI restrictions enabled.

So let's take this into account on arm64.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
efi: Discover BTI support in runtime services regions 2023-02-04T08:19:02+00:00 Ard Biesheuvel ardb@kernel.org 2023-02-01T08:48:12+00:00 cf1d2ffcc6f17b422239f6ab34b078945d07f9aa Add the generic plumbing to detect whether or not the runtime code regions were constructed with BTI/IBT landing pads by the firmware, permitting the OS to enable enforcement when mapping these regions into the OS's address space. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> 
Add the generic plumbing to detect whether or not the runtime code
regions were constructed with BTI/IBT landing pads by the firmware,
permitting the OS to enable enforcement when mapping these regions into
the OS's address space.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>