linux-toradex.git/arch/arm, branch v3.2.49

ARM: 7765/1: perf: Record the user-mode PC in the call chain.

2013-07-27T04:34:16+00:00

commit c5f927a6f62196226915f12194c9d0df4e2210d7 upstream.

With this change, we no longer lose the innermost entry in the user-mode
part of the call chain.  See also the x86 port, which includes the ip.

It's possible to partially work around this problem by post-processing
the data to use the PERF_SAMPLE_IP value, but this works only if the CPU
wasn't in the kernel when the sample was taken.

Signed-off-by: Jed Davis 
Signed-off-by: Will Deacon 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 7772/1: Fix missing flush_kernel_dcache_page() for noMMU

2013-06-29T03:06:28+00:00

commit 63384fd0b1509acf522a8a8fcede09087eedb7df upstream.

Commit 1bc3974 (ARM: 7755/1: handle user space mapped pages in
flush_kernel_dcache_page) moved the implementation of
flush_kernel_dcache_page() into mm/flush.c but did not implement it
on noMMU ARM.

Signed-off-by: Simon Baatz 
Acked-by: Kevin Hilman 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page

2013-06-29T03:06:28+00:00

commit 1bc39742aab09248169ef9d3727c9def3528b3f3 upstream.

Commit f8b63c1 made flush_kernel_dcache_page a no-op assuming that
the pages it needs to handle are kernel mapped only.  However, for
example when doing direct I/O, pages with user space mappings may
occur.

Thus, continue to do lazy flushing if there are no user space
mappings.  Otherwise, flush the kernel cache lines directly.

Signed-off-by: Simon Baatz 
Reviewed-by: Catalin Marinas 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 7743/1: compressed/head.S: work around new binutils warning

2013-06-19T01:16:56+00:00

commit da94a829305f1c217cfdf6771cb1faca0917e3b9 upstream.

In August 2012, Matthew Gretton-Dann checked a change into binutils
labelled "Error on obsolete & warn on deprecated registers", apparently as
part of ARMv8 support. Apparently, this was supposed to emit the message
"Warning: This coprocessor register access is deprecated in ARMv8" when
using certain mcr/mrc instructions and building for ARMv8. Unfortunately,
the message that is actually emitted appears to be '(null)', which is
less helpful in comparison.

Even more unfortunately, this is biting us on every single kernel
build with a new gas, because arch/arm/boot/compressed/head.S and some
other files in that directory are built with -march=all since kernel
commit 80cec14a8 "[ARM] Add -march=all to assembly file build in
arch/arm/boot/compressed" back in v2.6.28.

This patch reverts Russell's nice solution and instead marks the head.S
file to be built for armv7-a, which fortunately lets us build all
instructions in that file without warnings even on the broken binutils.

Without this patch, building anything results in:

arch/arm/boot/compressed/head.S: Assembler messages:
arch/arm/boot/compressed/head.S:565: Warning: (null)
arch/arm/boot/compressed/head.S:676: Warning: (null)
arch/arm/boot/compressed/head.S:698: Warning: (null)
arch/arm/boot/compressed/head.S:722: Warning: (null)
arch/arm/boot/compressed/head.S:726: Warning: (null)
arch/arm/boot/compressed/head.S:957: Warning: (null)
arch/arm/boot/compressed/head.S:996: Warning: (null)
arch/arm/boot/compressed/head.S:997: Warning: (null)
arch/arm/boot/compressed/head.S:1027: Warning: (null)
arch/arm/boot/compressed/head.S:1035: Warning: (null)
arch/arm/boot/compressed/head.S:1046: Warning: (null)
arch/arm/boot/compressed/head.S:1060: Warning: (null)
arch/arm/boot/compressed/head.S:1092: Warning: (null)
arch/arm/boot/compressed/head.S:1094: Warning: (null)
arch/arm/boot/compressed/head.S:1095: Warning: (null)
arch/arm/boot/compressed/head.S:1102: Warning: (null)
arch/arm/boot/compressed/head.S:1134: Warning: (null)

Signed-off-by: Arnd Bergmann 
Cc: Matthew Gretton-Dann 
Signed-off-by: Russell King 
[bwh: Backported to 3.2:
 - Adjust context
 - Remove definition of asflags-y as it is now empty]
Signed-off-by: Ben Hutchings

ARM: 7742/1: topology: export cpu_topology

2013-06-19T01:16:56+00:00

commit 92bdd3f5eba299b33c2f4407977d6fa2e2a6a0da upstream.

The cpu_topology symbol is required by any driver using the topology
interfaces, which leads to a couple of build errors:

ERROR: "cpu_topology" [drivers/net/ethernet/sfc/sfc.ko] undefined!
ERROR: "cpu_topology" [drivers/cpufreq/arm_big_little.ko] undefined!
ERROR: "cpu_topology" [drivers/block/mtip32xx/mtip32xx.ko] undefined!

The obvious solution is to export this symbol.

Signed-off-by: Arnd Bergmann 
Acked-by: Will Deacon 
Cc: Nicolas Pitre 
Cc: Vincent Guittot 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: plat-orion: Fix num_resources and id for ge10 and ge11

2013-05-30T13:35:03+00:00

commit 2b8b2797142c7951e635c6eec5d1705ee9bc45c5 upstream.

When platform data were moved from arch/arm/mach-mv78xx0/common.c to
arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion:
Consolidate ethernet platform data", there were few typo made on
gigabit Ethernet interface ge10 and ge11. This commit writes back
their initial value, which allows to use this interfaces again.

Signed-off-by: Gregory CLEMENT 
Acked-by: Andrew Lunn 
Signed-off-by: Jason Cooper 
Signed-off-by: Ben Hutchings

Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x

2013-05-30T13:34:58+00:00

commit 99e11334dcb846f9b76fb808196c7f47aa83abb3 upstream.

Enable KW_PCIE1 on QNAP TS-11x/TS-21x devices as newer revisions
(rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1.  Thanks
to Marek Vasut for identifying this issue!

Signed-off-by: Martin Michlmayr 
Tested-by: Marek Vasut 
Acked-by: Andrew Lunn 
Signed-off-by: Jason Cooper 
Signed-off-by: Ben Hutchings

mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload

2013-05-30T13:34:48+00:00

commit 91cf54feecf815bec0b6a8d6d9dbd0e219f2f2cc upstream.

Fix regression introduced by commit 796211b7953 ("mmc: atmel-mci: add
pdc support and runtime capabilities detection") which removed the need
for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the
compile guards around dma_release_channel() in remove(). Consequently,
DMA is always enabled (if supported), but the DMA-channel is not
released on module unload unless the DMA-config option is selected.

Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely.

Signed-off-by: Johan Hovold 
Acked-by: Ludovic Desroches 
Signed-off-by: Chris Ball 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

ARM: u300: fix ages old copy/paste bug

2013-05-13T14:02:28+00:00

commit 0259d9eb30d003af305626db2d8332805696e60d upstream.

The UART1 is on the fast AHB bridge, not on the slow bus.

Acked-by: Arnd Bergmann 
Signed-off-by: Linus Walleij 
Signed-off-by: Olof Johansson 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

ARM: 7698/1: perf: fix group validation when using enable_on_exec

2013-04-25T19:25:41+00:00

commit cb2d8b342aa084d1f3ac29966245dec9163677fb upstream.

Events may be created with attr->disabled == 1 and attr->enable_on_exec
== 1, which confuses the group validation code because events with the
PERF_EVENT_STATE_OFF are not considered candidates for scheduling, which
may lead to failure at group scheduling time.

This patch fixes the validation check for ARM, so that events in the
OFF state are still considered when enable_on_exec is true.

Cc: Peter Zijlstra 
Cc: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Reported-by: Sudeep KarkadaNagesha 
Signed-off-by: Will Deacon 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings