linux-toradex.git/arch/arm, branch v3.2.73

ARM: fix Thumb2 signal handling when ARMv6 is enabled

2015-10-13T02:46:09+00:00

commit 9b55613f42e8d40d5c9ccb8970bde6af4764b2ab upstream.

When a kernel is built covering ARMv6 to ARMv7, we omit to clear the
IT state when entering a signal handler.  This can cause the first
few instructions to be conditionally executed depending on the parent
context.

In any case, the original test for >= ARMv7 is broken - ARMv6 can have
Thumb-2 support as well, and an ARMv6T2 specific build would omit this
code too.

Relax the test back to ARMv6 or greater.  This results in us always
clearing the IT state bits in the PSR, even on CPUs where these bits
are reserved.  However, they're reserved for the IT state, so this
should cause no harm.

Fixes: d71e1352e240 ("Clear the IT state when invoking a Thumb-2 signal handler")
Acked-by: Tony Lindgren 
Tested-by: H. Nikolaus Schaller 
Tested-by: Grazvydas Ignotas 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode

2015-10-13T02:46:09+00:00

commit 6ecf830e5029598732e04067e325d946097519cb upstream.

The ARM architecture reference specifies that the IT state bits in the
PSR must be all zeros in ARM mode or behavior is unspecified.  On the
Qualcomm Snapdragon S4/Krait architecture CPUs the processor continues
to consider the IT state bits while in ARM mode.  This makes it so
that some instructions are skipped by the CPU.

Signed-off-by: T.J. Purtell 
[rmk+kernel@arm.linux.org.uk: fixed whitespace formatting in patch]
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 8429/1: disable GCC SRA optimization

2015-10-13T02:46:08+00:00

commit a077224fd35b2f7fbc93f14cf67074fc792fbac2 upstream.

While working on the 32-bit ARM port of UEFI, I noticed a strange
corruption in the kernel log. The following snprintf() statement
(in drivers/firmware/efi/efi.c:efi_md_typeattr_format())

	snprintf(pos, size, "|%3s|%2s|%2s|%2s|%3s|%2s|%2s|%2s|%2s]",

was producing the following output in the log:

	|    |   |   |   |    |WB|WT|WC|UC]
	|    |   |   |   |    |WB|WT|WC|UC]
	|    |   |   |   |    |WB|WT|WC|UC]
	|RUN|   |   |   |    |WB|WT|WC|UC]*
	|RUN|   |   |   |    |WB|WT|WC|UC]*
	|    |   |   |   |    |WB|WT|WC|UC]
	|RUN|   |   |   |    |WB|WT|WC|UC]*
	|    |   |   |   |    |WB|WT|WC|UC]
	|RUN|   |   |   |    |   |   |   |UC]
	|RUN|   |   |   |    |   |   |   |UC]

As it turns out, this is caused by incorrect code being emitted for
the string() function in lib/vsprintf.c. The following code

	if (!(spec.flags & LEFT)) {
		while (len < spec.field_width--) {
			if (buf < end)
				*buf = ' ';
			++buf;
		}
	}
	for (i = 0; i < len; ++i) {
		if (buf < end)
			*buf = *s;
		++buf; ++s;
	}
	while (len < spec.field_width--) {
		if (buf < end)
			*buf = ' ';
		++buf;
	}

when called with len == 0, triggers an issue in the GCC SRA optimization
pass (Scalar Replacement of Aggregates), which handles promotion of signed
struct members incorrectly. This is a known but as yet unresolved issue.
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932). In this particular
case, it is causing the second while loop to be executed erroneously a
single time, causing the additional space characters to be printed.

So disable the optimization by passing -fno-ipa-sra.

Acked-by: Nicolas Pitre 
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 8320/1: fix integer overflow in ELF_ET_DYN_BASE

2015-08-06T23:32:02+00:00

commit 8defb3367fcd19d1af64c07792aade0747b54e0f upstream.

Usually ELF_ET_DYN_BASE is 2/3 of TASK_SIZE. With 3G/1G user/kernel
split this is not so, because 2*TASK_SIZE overflows 32 bits,
so the actual value of ELF_ET_DYN_BASE is:
	(2 * TASK_SIZE / 3) = 0x2a000000

When ASLR is disabled PIE binaries will load at ELF_ET_DYN_BASE address.
On 32bit platforms AddressSanitzer uses addresses [0x20000000 - 0x40000000]
for shadow memory [1]. So ASan doesn't work for PIE binaries when ASLR disabled
as it fails to map shadow memory.
Also after Kees's 'split ET_DYN ASLR from mmap ASLR' patchset PIE binaries
has a high chance of loading somewhere in between [0x2a000000 - 0x40000000]
even if ASLR enabled. This makes ASan with PIE absolutely incompatible.

Fix overflow by dividing TASK_SIZE prior to multiplying.
After this patch ELF_ET_DYN_BASE equals to (for CONFIG_VMSPLIT_3G=y):
	(TASK_SIZE / 3 * 2) = 0x7f555554

[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerAlgorithm#Mapping

Signed-off-by: Andrey Ryabinin 
Reported-by: Maria Guseva 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

ARM: 8284/1: sa1100: clear RCSR_SMR on resume

2015-05-09T22:16:13+00:00

commit e461894dc2ce7778ccde1c3483c9b15a85a7fc5f upstream.

StrongARM core uses RCSR SMR bit to tell to bootloader that it was reset
by entering the sleep mode. After we have resumed, there is little point
in having that bit enabled. Moreover, if this bit is set before reboot,
the bootloader can become confused. Thus clear the SMR bit on resume
just before clearing the scratchpad (resume address) register.

Signed-off-by: Dmitry Eremin-Solenikov 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

hx4700: regulator: declare full constraints

2015-05-09T22:16:11+00:00

commit a52d209336f8fc7483a8c7f4a8a7d2a8e1692a6c upstream.

Since the removal of CONFIG_REGULATOR_DUMMY option, the touchscreen stopped
working. This patch enables the "replacement" for REGULATOR_DUMMY and
allows the touchscreen to work even though there is no regulator for "vcc".

Signed-off-by: Martin Vajnar 
Signed-off-by: Robert Jarzmik 
Signed-off-by: Ben Hutchings

ARM: pxa: add regulator_has_full_constraints to spitz board file

2015-05-09T22:16:11+00:00

commit baad2dc49c5d970ea881d92981a1b76c94a7b7a1 upstream.

Add regulator_has_full_constraints() call to spitz board file to let
regulator core know that we do not have any additional regulators left.
This lets it substitute unprovided regulators with dummy ones.

This fixes the following warnings that can be seen on spitz if
regulators are enabled:

ads7846 spi2.0: unable to get regulator: -517
spi spi2.0: Driver ads7846 requests probe deferral

Signed-off-by: Dmitry Eremin-Solenikov 
Acked-by: Mark Brown 
Signed-off-by: Robert Jarzmik 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

ARM: pxa: add regulator_has_full_constraints to poodle board file

2015-05-09T22:16:10+00:00

commit 9bc78f32c2e430aebf6def965b316aa95e37a20c upstream.

Add regulator_has_full_constraints() call to poodle board file to let
regulator core know that we do not have any additional regulators left.
This lets it substitute unprovided regulators with dummy ones.

This fixes the following warnings that can be seen on poodle if
regulators are enabled:

ads7846 spi1.0: unable to get regulator: -517
spi spi1.0: Driver ads7846 requests probe deferral
wm8731 0-001b: Failed to get supply 'AVDD': -517
wm8731 0-001b: Failed to request supplies: -517
wm8731 0-001b: ASoC: failed to probe component -517

Signed-off-by: Dmitry Eremin-Solenikov 
Acked-by: Mark Brown 
Signed-off-by: Robert Jarzmik 
Signed-off-by: Ben Hutchings

ARM: pxa: add regulator_has_full_constraints to corgi board file

2015-05-09T22:16:10+00:00

commit 271e80176aae4e5b481f4bb92df9768c6075bbca upstream.

Add regulator_has_full_constraints() call to corgi board file to let
regulator core know that we do not have any additional regulators left.
This lets it substitute unprovided regulators with dummy ones.

This fixes the following warnings that can be seen on corgi if
regulators are enabled:

ads7846 spi1.0: unable to get regulator: -517
spi spi1.0: Driver ads7846 requests probe deferral
wm8731 0-001b: Failed to get supply 'AVDD': -517
wm8731 0-001b: Failed to request supplies: -517
wm8731 0-001b: ASoC: failed to probe component -517
corgi-audio corgi-audio: ASoC: failed to instantiate card -517

Signed-off-by: Dmitry Eremin-Solenikov 
Acked-by: Mark Brown 
Signed-off-by: Robert Jarzmik 
Signed-off-by: Ben Hutchings

bus: omap_l3_noc: Correct returning IRQ_HANDLED unconditionally in the irq handler

2015-02-20T00:49:25+00:00

commit c4cf0935a2d8fe6d186bf4253ea3c4b4a8a8a710 upstream.

Correct returning IRQ_HANDLED unconditionally in the irq handler.
Return IRQ_NONE for some interrupt which we do not expect to be
handled in this handler. This prevents kernel stalling with back
to back spurious interrupts.

Fixes: 2722e56de6 ("OMAP4: l3: Introduce l3-interconnect error handling driver")
Acked-by: Nishanth Menon 
Signed-off-by: Keerthy 
Signed-off-by: Tony Lindgren 
[bwh: Backported to 3.2: adjust filename, indentation]
Signed-off-by: Ben Hutchings