linux-toradex.git/arch/arm, branch v3.4.64 Linux kernel for Apalis and Colibri modules ARM: PCI: versatile: Fix SMAP register offsets 2013-09-27T00:15:30+00:00 Peter Maydell peter.maydell@linaro.org 2013-08-22T16:47:50+00:00 5aea7495c35989747bddf461cd400017698a6bd7 commit 99f2b130370b904ca5300079243fdbcafa2c708b upstream. The SMAP register offsets in the versatile PCI controller code were all off by four. (This didn't have any observable bad effects because on this board PHYS_OFFSET is zero, and (a) writing zero to the flags register at offset 0x10 has no effect and (b) the reset value of the SMAP register is zero anyway, so failing to write SMAP2 didn't matter.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 99f2b130370b904ca5300079243fdbcafa2c708b upstream.

The SMAP register offsets in the versatile PCI controller code were
all off by four.  (This didn't have any observable bad effects
because on this board PHYS_OFFSET is zero, and (a) writing zero to
the flags register at offset 0x10 has no effect and (b) the reset
value of the SMAP register is zero anyway, so failing to write SMAP2
didn't matter.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 7809/1: perf: fix event validation for software group leaders 2013-08-20T15:26:29+00:00 Will Deacon will.deacon@arm.com 2013-08-07T22:39:41+00:00 40c366017f537354c64ea8b77d57ca81ecbd6b1d commit c95eb3184ea1a3a2551df57190c81da695e2144b upstream. It is possible to construct an event group with a software event as a group leader and then subsequently add a hardware event to the group. This results in the event group being validated by adding all members of the group to a fake PMU and attempting to allocate each event on their respective PMU. Unfortunately, for software events wthout a corresponding arm_pmu, this results in a kernel crash attempting to dereference the ->get_event_idx function pointer. This patch fixes the problem by checking explicitly for software events and ignoring those in event validation (since they can always be scheduled). We will probably want to revisit this for 3.12, since the validation checks don't appear to work correctly when dealing with multiple hardware PMUs anyway. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c95eb3184ea1a3a2551df57190c81da695e2144b upstream.

It is possible to construct an event group with a software event as a
group leader and then subsequently add a hardware event to the group.
This results in the event group being validated by adding all members
of the group to a fake PMU and attempting to allocate each event on
their respective PMU.

Unfortunately, for software events wthout a corresponding arm_pmu, this
results in a kernel crash attempting to dereference the ->get_event_idx
function pointer.

This patch fixes the problem by checking explicitly for software events
and ignoring those in event validation (since they can always be
scheduled). We will probably want to revisit this for 3.12, since the
validation checks don't appear to work correctly when dealing with
multiple hardware PMUs anyway.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
perf/arm: Fix armpmu_map_hw_event() 2013-08-20T15:26:27+00:00 Stephen Boyd sboyd@codeaurora.org 2013-08-07T23:18:08+00:00 2e42d79b7e06a080d55da0b05c823c0ba2abaa0c commit b88a2595b6d8aedbd275c07dfa784657b4f757eb upstream. Fix constraint check in armpmu_map_hw_event(). Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b88a2595b6d8aedbd275c07dfa784657b4f757eb upstream.

Fix constraint check in armpmu_map_hw_event().

Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 7765/1: perf: Record the user-mode PC in the call chain. 2013-07-22T01:19:02+00:00 Jed Davis jld@mozilla.com 2013-06-20T09:16:29+00:00 a62fe336474b61aa946e6a6e327890234a33a01b commit c5f927a6f62196226915f12194c9d0df4e2210d7 upstream. With this change, we no longer lose the innermost entry in the user-mode part of the call chain. See also the x86 port, which includes the ip. It's possible to partially work around this problem by post-processing the data to use the PERF_SAMPLE_IP value, but this works only if the CPU wasn't in the kernel when the sample was taken. Signed-off-by: Jed Davis <jld@mozilla.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c5f927a6f62196226915f12194c9d0df4e2210d7 upstream.

With this change, we no longer lose the innermost entry in the user-mode
part of the call chain.  See also the x86 port, which includes the ip.

It's possible to partially work around this problem by post-processing
the data to use the PERF_SAMPLE_IP value, but this works only if the CPU
wasn't in the kernel when the sample was taken.

Signed-off-by: Jed Davis <jld@mozilla.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 7772/1: Fix missing flush_kernel_dcache_page() for noMMU 2013-07-03T17:59:00+00:00 Simon Baatz gmbnomis@gmail.com 2013-06-22T21:01:25+00:00 a5f9dc0a79f24b79ed088d910c0fa3c30f52e305 commit 63384fd0b1509acf522a8a8fcede09087eedb7df upstream. Commit 1bc3974 (ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page) moved the implementation of flush_kernel_dcache_page() into mm/flush.c but did not implement it on noMMU ARM. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 63384fd0b1509acf522a8a8fcede09087eedb7df upstream.

Commit 1bc3974 (ARM: 7755/1: handle user space mapped pages in
flush_kernel_dcache_page) moved the implementation of
flush_kernel_dcache_page() into mm/flush.c but did not implement it
on noMMU ARM.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page 2013-07-03T17:59:00+00:00 Simon Baatz gmbnomis@gmail.com 2013-06-10T20:10:12+00:00 5fca91fe312daac06f00bab90449f766e445731a commit 1bc39742aab09248169ef9d3727c9def3528b3f3 upstream. Commit f8b63c1 made flush_kernel_dcache_page a no-op assuming that the pages it needs to handle are kernel mapped only. However, for example when doing direct I/O, pages with user space mappings may occur. Thus, continue to do lazy flushing if there are no user space mappings. Otherwise, flush the kernel cache lines directly. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1bc39742aab09248169ef9d3727c9def3528b3f3 upstream.

Commit f8b63c1 made flush_kernel_dcache_page a no-op assuming that
the pages it needs to handle are kernel mapped only.  However, for
example when doing direct I/O, pages with user space mappings may
occur.

Thus, continue to do lazy flushing if there are no user space
mappings.  Otherwise, flush the kernel cache lines directly.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x 2013-06-07T19:49:13+00:00 Martin Michlmayr tbm@cyrius.com 2013-04-21T16:14:00+00:00 1b2324460cacc89965a42f7d2dc721f8f7ebc97c commit 99e11334dcb846f9b76fb808196c7f47aa83abb3 upstream. Enable KW_PCIE1 on QNAP TS-11x/TS-21x devices as newer revisions (rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1. Thanks to Marek Vasut for identifying this issue! Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Tested-by: Marek Vasut <marex@denx.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 99e11334dcb846f9b76fb808196c7f47aa83abb3 upstream.

Enable KW_PCIE1 on QNAP TS-11x/TS-21x devices as newer revisions
(rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1.  Thanks
to Marek Vasut for identifying this issue!

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Tested-by: Marek Vasut <marex@denx.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: plat-orion: Fix num_resources and id for ge10 and ge11 2013-06-07T19:49:10+00:00 Gregory CLEMENT gregory.clement@free-electrons.com 2013-05-19T20:12:43+00:00 d8259185744d8c07f28a7159532ce01489dd6e34 commit 2b8b2797142c7951e635c6eec5d1705ee9bc45c5 upstream. When platform data were moved from arch/arm/mach-mv78xx0/common.c to arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion: Consolidate ethernet platform data", there were few typo made on gigabit Ethernet interface ge10 and ge11. This commit writes back their initial value, which allows to use this interfaces again. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2b8b2797142c7951e635c6eec5d1705ee9bc45c5 upstream.

When platform data were moved from arch/arm/mach-mv78xx0/common.c to
arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion:
Consolidate ethernet platform data", there were few typo made on
gigabit Ethernet interface ge10 and ge11. This commit writes back
their initial value, which allows to use this interfaces again.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices 2013-05-19T17:54:34+00:00 Aaro Koskinen aaro.koskinen@iki.fi 2013-05-08T23:48:00+00:00 4831852099fa57f0ac7948339a1e7554db67335b commit e65f131a14726e5f1b880a528271a52428e5b3a5 upstream. Commit 9fdca9df (spi: omap2-mcspi: convert to module_platform_driver) broke the SPI display/panel driver probe on RX-51/N900. The exact cause is not fully understood, but it seems to be related to the probe order. SPI communication to the panel driver (spi1.2) fails unless the touchscreen (spi1.0) has been probed/initialized before. When the omap2-mcspi driver was converted to a platform driver, it resulted in that the devices are probed immediately after the board registers them in the order they are listed in the board file. Fix the issue by moving the touchscreen before the panel in the SPI device list. The patch fixes the following failure: [ 1.260955] acx565akm spi1.2: invalid display ID [ 1.265899] panel-acx565akm display0: acx_panel_probe panel detect error [ 1.273071] omapdss CORE error: driver probe failed: -19 Tested-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Joni Lapilainen <joni.lapilainen@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e65f131a14726e5f1b880a528271a52428e5b3a5 upstream.

Commit 9fdca9df (spi: omap2-mcspi: convert to module_platform_driver)
broke the SPI display/panel driver probe on RX-51/N900. The exact cause is
not fully understood, but it seems to be related to the probe order. SPI
communication to the panel driver (spi1.2) fails unless the touchscreen
(spi1.0) has been probed/initialized before. When the omap2-mcspi driver
was converted to a platform driver, it resulted in that the devices are
probed immediately after the board registers them in the order they are
listed in the board file.

Fix the issue by moving the touchscreen before the panel in the SPI
device list.

The patch fixes the following failure:

[    1.260955] acx565akm spi1.2: invalid display ID
[    1.265899] panel-acx565akm display0: acx_panel_probe panel detect error
[    1.273071] omapdss CORE error: driver probe failed: -19

Tested-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Joni Lapilainen <joni.lapilainen@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload 2013-05-08T02:51:57+00:00 Johan Hovold jhovold@gmail.com 2013-03-13T16:11:59+00:00 bb878b3019cb0b1d574bd88e30ce00ea6d6814f9 commit 91cf54feecf815bec0b6a8d6d9dbd0e219f2f2cc upstream. Fix regression introduced by commit 796211b7953 ("mmc: atmel-mci: add pdc support and runtime capabilities detection") which removed the need for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the compile guards around dma_release_channel() in remove(). Consequently, DMA is always enabled (if supported), but the DMA-channel is not released on module unload unless the DMA-config option is selected. Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 91cf54feecf815bec0b6a8d6d9dbd0e219f2f2cc upstream.

Fix regression introduced by commit 796211b7953 ("mmc: atmel-mci: add
pdc support and runtime capabilities detection") which removed the need
for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the
compile guards around dma_release_channel() in remove(). Consequently,
DMA is always enabled (if supported), but the DMA-channel is not
released on module unload unless the DMA-config option is selected.

Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>