Pull ARM fix from Russell King:

 - Fix a build issue with older binutils with LD dead code elimination
   disabled

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
  ARM: 9414/1: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION

There is a build issue with LD segmentation fault, while
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled, as bellow.

scripts/link-vmlinux.sh: line 49:  3796 Segmentation fault
 (core dumped) ${ld} ${ldflags} -o ${output} ${wl}--whole-archive
 ${objs} ${wl}--no-whole-archive ${wl}--start-group
 ${libs} ${wl}--end-group ${kallsymso} ${btf_vmlinux_bin_o} ${ldlibs}

The error occurs in older versions of the GNU ld with version earlier
than 2.36. It makes most sense to have a minimum LD version as
a dependency for HAVE_LD_DEAD_CODE_DATA_ELIMINATION and eliminate
the impact of ".reloc  .text, R_ARM_NONE, ." when
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled.

Fixes: ed0f94102251 ("ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION")
Reported-by: Harith George <mail2hgg@gmail.com>
Tested-by: Harith George <mail2hgg@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://lore.kernel.org/all/14e9aefb-88d1-4eee-8288-ef15d4a9b059@gmail.com/
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

i.MX fixes for 6.11:

- One imx8mp-beacon-kit change from Adam Ford to fix the broken WM8962
  audio support
- One pinctrl property typo fix for imx8mm-phygate
- One layerscape fix from Krzysztof Kozlowski to get thermal nodes
  correct name length
- A couple of imx93-tqma9352 fixes from Markus Niebel, one on CMA
  alloc-ranges and the other on SD-Card cd-gpios typo
- One change from Michal Vokáč to fix imx6dl-yapp43 LED current to match
  the HW design
- A couple of imx95 fixes from Peng Fan, one to correct a55 power
  domains and the other to correct L3Cache cache-sets
- One tqma9352 watchdog reset fix from Sascha Hauer
- One imx93 change from Shenwei Wang to fix the default value for STMMAC
  EQOS snps,clk-csr

* tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
  arm64: dts: imx95: correct L3Cache cache-sets
  arm64: dts: imx95: correct a55 power-domains
  arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
  arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
  ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
  arm64: dts: imx93: update default value for snps,clk-csr
  arm64: dts: freescale: tqma9352: Fix watchdog reset
  arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
  arm64: dts: layerscape: fix thermal node names length

Link: https://lore.kernel.org/r/ZrtsTO1+jXhJ6GSM@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

OMAP fixes for v6.11-rc

- omap3-n900: fix accelerometer orientation

* tag 'omap-for-v6.11/fixes-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
  ARM: dts: omap3-n900: correct the accelerometer orientation

Link: https://lore.kernel.org/r/7h4j7eyhyh.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Fix a recently introduced build failure.

Cc: Russell King <rmk+kernel@armlinux.org.uk>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240805232026.65087-2-bvanassche@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On the imx6dl-yapp4 revision based boards, the RGB LED is not driven
directly by the LP5562 driver but through FET transistors. Hence the LED
current is not determined by the driver but by the LED series resistors.

On the imx6dl-yapp43 revision based boards, we removed the FET transistors
to drive the LED directly from the LP5562 but forgot to tune the output
current to match the previous HW design.

Set the LED current on imx6dl-yapp43 based boards to the same values
measured on the imx6dl-yapp4 boards and limit the maximum current to 20mA.

Fixes: 7da4734751e0 ("ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "There are three sets of patches for the soc tree:

   - Marek Behún addresses multiple build time regressions caused by
     changes to the cznic turris-omnia support

   - Dmitry Torokhov fixes a regression in the legacy "gumstix" board
     code he cleaned up earlier

   - The TI K3 maintainers found multiple bugs in the in gpio, audio and
     pcie devicetree nodes"

* tag 'arm-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: pxa/gumstix: fix attaching properties to vbus gpio device
  doc: platform: cznic: turris-omnia-mcu: Use double backticks for attribute value
  doc: platform: cznic: turris-omnia-mcu: Fix sphinx-build warning
  platform: cznic: turris-omnia-mcu: Make GPIO code optional
  platform: cznic: turris-omnia-mcu: Make poweroff and wakeup code optional
  platform: cznic: turris-omnia-mcu: Make TRNG code optional
  platform: cznic: turris-omnia-mcu: Make watchdog code optional
  arm64: dts: ti: k3-j784s4-main: Correct McASP DMAs
  arm64: dts: ti: k3-j722s: Fix gpio-range for main_pmx0
  arm64: dts: ti: k3-am62p: Fix gpio-range for main_pmx0
  arm64: dts: ti: k3-am62p: Add gpio-ranges for mcu_gpio0
  arm64: dts: ti: k3-am62-verdin-dahlia: Keep CTRL_SLEEP_MOCI# regulator on
  arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references
  arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1

Commit f1d6588af93b tried to convert GPIO lookup tables to software
properties for the vbus gpio device, bit forgot the most important
step: actually attaching the new properties to the device.

Also fix up the name of the property array to reflect the board name,
and add missing gpio/property.h and devices.h includes absence of which
causes compile failures on some configurations.

Switch "#ifdef CONFIG_USB_PXA25X" to "#if IS_ENABLED(CONFIG_USB_PXA25X)"
because it should not matter if the driver is buolt in or a module, it
still need vbus controls.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: f1d6588af93b ("ARM: pxa/gumstix: convert vbus gpio to use software nodes")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Negate the values reported for the accelerometer z-axis in order to
match Documentation/devicetree/bindings/iio/mount-matrix.txt.

Fixes: 14a213dcb004 ("ARM: dts: n900: use iio driver for accelerometer")

Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Reviewed-By: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20240722113137.3240847-1-absicsz@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Commit 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and
regulator nodenames") renamed nodes and created 2 "clock-24000000" nodes
(at different paths).

The kernel can't handle these duplicate names even though they are at
different paths.  Fix this by renaming one of the nodes to "clock-pclk".

This name is aligned with other Arm boards (those didn't have a known
frequency to use in the node name).

Fixes: 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and regulator nodenames")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>