Pull ARM fix from Russell King: "Just one fix for memset64() on big endian 32-bit ARM systems" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: ARM: 9468/1: fix memset64() on big-endian
On big-endian systems the 32-bit low and high halves need to be swapped
for the underlying assembly implementation to work correctly.
Fixes: fd1d362600e2 ("ARM: implement memset32 & memset64")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Nuvoton NPCM Arm fixes for v6.19 Just the one change from Randy dropping an unused Kconfig symbol. * tag 'nuvoton-arm-6.19-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux: arm: npcm: drop unused Kconfig ERRATA symbol Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Microchip AT91 fixes for v6.19 This update includes: - fix access to the PHYs on the Microchip LAN966X PCB8290 board - fix the ranges DT property for flexcom9 on the Microchip SAMA7D65 SoC - fix the #size-cells DT property for i2c3 on the Microchip SAMA7D65 SoC * tag 'at91-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sama7d65: fix size-cells property for i2c3 ARM: dts: microchip: sama7d65: fix the ranges property for flx9 ARM: dts: microchip: lan966x: Fix the access to the PHYs for pcb8290 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix the #size-cells property for i2c3 node and remove the dtbs_check
error telling that "#size-cells: 0 was expected" from schema
atmel,at91sam-i2c.yaml and i2c-controller.yaml.
Fixes: b51e4aea3ecf ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC")
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20260102170135.70717-3-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Update the ranges property for the flexcom9 as per the datasheet and
align with the reg property.
Fixes: b51e4aea3ecf ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC")
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20260102170135.70717-2-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The code for this errata was not merged. See
https://lore.kernel.org/linux-arm-kernel/CAL_JsqK--G_7nO_UQ6jyomA1Sq6GUKtXVZpBF0dXjYA2iE047w@mail.gmail.com/
Fixes: 7bffa14c9aed ("arm: npcm: add basic support for Nuvoton BMCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
i.MX fixes for 6.19: - A mba8mx fix from Alexander Stein to correct Ethernet PHY IRQ trigger type - An i.MX95 fix from Carlos Song to correct I3C2 pclk - A couple of imx8qm-mek changes from Haibo Chen to fix light sensor interrupt type and usdhc2 regulator configuration - An imx6q-ba16 change from Ian Ray to fix RTC interrupt level - An imx8mp-dhcom-som change from Marek Vasut to fix sporadic Ethernet link bouncing caused by interruptions on the PHY reference clock - A couple of imx8mp-tx8p changes from Maud Spierings to fix compatible and eqos nvmem-cells - An ARM i.MX fix from Rob Herring to correct mc13xxx LED node names - An imx8qm-ss-dma change from Sherry Sun to correct DMA channels for LPUART - A couple of imx95-toradex-smarc changes from Vitor Soares to fix ethphy1 interrupt and SMARC_SDIO_WP label position * tag 'imx-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: mba8mx: Fix Ethernet PHY IRQ support arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells arm64: dts: freescale: moduline-display: fix compatible dt-bindings: arm: fsl: moduline-display: fix compatible ARM: dts: imx6q-ba16: fix RTC interrupt level arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt arm64: dts: add off-on-delay-us for usdhc2 regulator arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level ARM: dts: nxp: imx: Fix mc13xxx LED node names arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The problem is that the MDIO controller can't detect any of the PHYs. The reason is that the lan966x is not pulling high the GPIO 53 that is connected to the PHYs reset GPIO. Without doing this the PHYs are kept in reset. The mdio controller framework has the possibility to control a GPIO to release the reset of the PHYs. So take advantage of this and set line to be high before accessing the PHYs. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20251119134750.394655-1-horatiu.vultur@microchip.com [claudiu.beznea: add microchip in patch title, s/possiblity/possibility in patch description] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:
f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode")
which changed the way IRQ type is obtained.
Fixes: 56c27310c1b4 ("ARM: dts: imx: Add Advantech BA-16 Qseven module")
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>