linux-toradex.git/arch/c6x/kernel, branch v3.17

c6x: Use sigsp()

2014-08-06T11:04:07+00:00

Use sigsp() instead of the open coded variant.

Signed-off-by: Richard Weinberger 
Acked-by: Mark Salter

c6x: Use get_signal() signal_setup_done()

2014-08-06T11:02:12+00:00

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.

Tested-by: Mark Salter 
Acked-by: Mark Salter 
Signed-off-by: Richard Weinberger

c6x: convert fdt pointers to opaque pointers

2014-04-30T05:59:12+00:00

The architecture code does not need to access the internals of the FDT
blob, so make the pointer to it void *.

Signed-off-by: Rob Herring 
Cc: Mark Salter 
Cc: Aurelien Jacquiot 
Cc: linux-c6x-dev@linux-c6x.org
Tested-by: Grant Likely

of: remove early_init_dt_setup_initrd_arch

2013-10-09T16:39:01+00:00

All arches do essentially the same thing now for
early_init_dt_setup_initrd_arch, so it can now be removed.

Signed-off-by: Rob Herring 
Acked-by: Vineet Gupta 
Cc: Russell King 
Cc: Mark Salter 
Cc: Aurelien Jacquiot 
Cc: James Hogan 
Cc: Michal Simek 
Cc: Ralf Baechle 
Cc: Jonas Bonn 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Cc: x86@kernel.org
Cc: Chris Zankel 
Cc: Max Filippov 
Acked-by: Grant Likely

c6x: use early_init_dt_scan

2013-10-09T16:38:12+00:00

Convert c6x to use new early_init_dt_scan function.

Signed-off-by: Rob Herring 
Acked-by: Mark Salter 
Cc: Aurelien Jacquiot 
Cc: linux-c6x-dev@linux-c6x.org

c6x: use boot_command_line instead of private c6x_command_line

2013-10-09T16:37:27+00:00

Save some pointless copying of the kernel command line and just use
boot_command_line instead.

Also remove default_command_line as it is not referenced anywhere, and
the DT code already handles the default command line.

Signed-off-by: Rob Herring 
Tested-by: Mark Salter 
Acked-by: Mark Salter 
Cc: Aurelien Jacquiot 
Cc: linux-c6x-dev@linux-c6x.org
Reviewed-by: Grant Likely

of: consolidate definition of early_init_dt_alloc_memory_arch()

2013-08-28T20:18:32+00:00

Most architectures use the same implementation. Collapse the common ones
into a single weak function that can be overridden.

Signed-off-by: Grant Likely

of: Specify initrd location using 64-bit

2013-07-24T10:10:01+00:00

On some PAE architectures, the entire range of physical memory could reside
outside the 32-bit limit.  These systems need the ability to specify the
initrd location using 64-bit numbers.

This patch globally modifies the early_init_dt_setup_initrd_arch() function to
use 64-bit numbers instead of the current unsigned long.

There has been quite a bit of debate about whether to use u64 or phys_addr_t.
It was concluded to stick to u64 to be consistent with rest of the device
tree code. As summarized by Geert, "The address to load the initrd is decided
by the bootloader/user and set at that point later in time. The dtb should not
be tied to the kernel you are booting"

More details on the discussion can be found here:
https://lkml.org/lkml/2013/6/20/690
https://lkml.org/lkml/2012/9/13/544

Signed-off-by: Santosh Shilimkar 
Acked-by: Rob Herring 
Acked-by: Vineet Gupta 
Acked-by: Jean-Christophe PLAGNIOL-VILLARD 
Signed-off-by: Grant Likely

c6x: normalize global variables exported by vmlinux.lds

2013-07-03T23:07:34+00:00

Normalize global variables exported by vmlinux.lds to conform usage
guidelines from include/asm-generic/sections.h.

Use _text to mark the start of the kernel image including the head text,
and _stext to mark the start of the .text section.

This patch also fixes possible bugs due to current address layout that
[__init_begin, __init_end] is a sub-range of [_stext, _etext] and pages
within range [__init_begin, __init_end] will be freed by free_initmem().

Signed-off-by: Jiang Liu 
Cc: Mark Salter 
Cc: Aurelien Jacquiot 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dump_stack: unify debug information printed by show_regs()

2013-05-01T00:04:02+00:00

show_regs() is inherently arch-dependent but it does make sense to print
generic debug information and some archs already do albeit in slightly
different forms.  This patch introduces a generic function to print debug
information from show_regs() so that different archs print out the same
information and it's much easier to modify what's printed.

show_regs_print_info() prints out the same debug info as dump_stack()
does plus task and thread_info pointers.

* Archs which didn't print debug info now do.

  alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r,
  metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc,
  um, xtensa

* Already prints debug info.  Replaced with show_regs_print_info().
  The printed information is superset of what used to be there.

  arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86

* s390 is special in that it used to print arch-specific information
  along with generic debug info.  Heiko and Martin think that the
  arch-specific extra isn't worth keeping s390 specfic implementation.
  Converted to use the generic version.

Note that now all archs print the debug info before actual register
dumps.

An example BUG() dump follows.

 kernel BUG at /work/os/work/kernel/workqueue.c:4841!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7
 Hardware name: empty empty/S3992, BIOS 080011  10/26/2007
 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000
 RIP: 0010:[]  [] init_workqueues+0x4/0x6
 RSP: 0000:ffff88007c861ec8  EFLAGS: 00010246
 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001
 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a
 RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Stack:
  ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650
  0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d
  ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760
 Call Trace:
  [] do_one_initcall+0x122/0x170
  [] kernel_init_freeable+0x9b/0x1c8
  [] ? rest_init+0x140/0x140
  [] kernel_init+0xe/0xf0
  [] ret_from_fork+0x7c/0xb0
  [] ? rest_init+0x140/0x140
  ...

v2: Typo fix in x86-32.

v3: CPU number dropped from show_regs_print_info() as
    dump_stack_print_info() has been updated to print it.  s390
    specific implementation dropped as requested by s390 maintainers.

Signed-off-by: Tejun Heo 
Acked-by: David S. Miller 
Acked-by: Jesper Nilsson 
Cc: Heiko Carstens 
Cc: Martin Schwidefsky 
Cc: Bjorn Helgaas 
Cc: Fengguang Wu 
Cc: Mike Frysinger 
Cc: Vineet Gupta 
Cc: Sam Ravnborg 
Acked-by: Chris Metcalf 		[tile bits]
Acked-by: Richard Kuo 		[hexagon bits]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds