Pull m68k updates from Geert Uytterhoeven:

 - Add support for QEMU virt-ctrl, and use it for system reset
   and power off on the virt platform

 - defconfig updates

 - Miscellaneous fixes and improvements

* tag 'm68k-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: virt: Switch to qemu-virt-ctrl driver
  power: reset: Add QEMU virt-ctrl driver
  m68k: defconfig: Update defconfigs for v7.0-rc1
  m68k: emu: Replace unbounded sprintf() in nfhd_init_one()
  m68k: uapi: Add ucontext.h
  m68k: defconfig: hp300: Enable monochrome and 16-color linux logos
  m68k: q40: Remove commented out code

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Support HW queue leasing, allowing containers to be granted access
     to HW queues for zero-copy operations and AF_XDP

   - Number of code moves to help the compiler with inlining. Avoid
     output arguments for returning drop reason where possible

   - Rework drop handling within qdiscs to include more metadata about
     the reason and dropping qdisc in the tracepoints

   - Remove the rtnl_lock use from IP Multicast Routing

   - Pack size information into the Rx Flow Steering table pointer
     itself. This allows making the table itself a flat array of u32s,
     thus making the table allocation size a power of two

   - Report TCP delayed ack timer information via socket diag

   - Add ip_local_port_step_width sysctl to allow distributing the
     randomly selected ports more evenly throughout the allowed space

   - Add support for per-route tunsrc in IPv6 segment routing

   - Start work of switching sockopt handling to iov_iter

   - Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
     buffer size drifting up

   - Support MSG_EOR in MPTCP

   - Add stp_mode attribute to the bridge driver for STP mode selection.
     This addresses concerns about call_usermodehelper() usage

   - Remove UDP-Lite support (as announced in 2023)

   - Remove support for building IPv6 as a module. Remove the now
     unnecessary function calling indirection

  Cross-tree stuff:

   - Move Michael MIC code from generic crypto into wireless, it's
     considered insecure but some WiFi networks still need it

  Netfilter:

   - Switch nft_fib_ipv6 module to no longer need temporary dst_entry
     object allocations by using fib6_lookup() + RCU.

     Florian W reports this gets us ~13% higher packet rate

   - Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
     switch the service tables to be per-net. Convert some code that
     walks the service lists to use RCU instead of the service_mutex

   - Add more opinionated input validation to lower security exposure

   - Make IPVS hash tables to be per-netns and resizable

  Wireless:

   - Finished assoc frame encryption/EPPKE/802.1X-over-auth

   - Radar detection improvements

   - Add 6 GHz incumbent signal detection APIs

   - Multi-link support for FILS, probe response templates and client
     probing

   - New APIs and mac80211 support for NAN (Neighbor Aware Networking,
     aka Wi-Fi Aware) so less work must be in firmware

  Driver API:

   - Add numerical ID for devlink instances (to avoid having to create
     fake bus/device pairs just to have an ID). Support shared devlink
     instances which span multiple PFs

   - Add standard counters for reporting pause storm events (implement
     in mlx5 and fbnic)

   - Add configuration API for completion writeback buffering (implement
     in mana)

   - Support driver-initiated change of RSS context sizes

   - Support DPLL monitoring input frequency (implement in zl3073x)

   - Support per-port resources in devlink (implement in mlx5)

  Misc:

   - Expand the YAML spec for Netfilter

  Drivers

   - Software:
      - macvlan: support multicast rx for bridge ports with shared
        source MAC address
      - team: decouple receive and transmit enablement for IEEE 802.3ad
        LACP "independent control"

   - Ethernet high-speed NICs:
      - nVidia/Mellanox:
         - support high order pages in zero-copy mode (for payload
           coalescing)
         - support multiple packets in a page (for systems with 64kB
           pages)
      - Broadcom 25-400GE (bnxt):
         - implement XDP RSS hash metadata extraction
         - add software fallback for UDP GSO, lowering the IOMMU cost
      - Broadcom 800GE (bnge):
         - add link status and configuration handling
         - add various HW and SW statistics
      - Marvell/Cavium:
         - NPC HW block support for cn20k
      - Huawei (hinic3):
         - add mailbox / control queue
         - add rx VLAN offload
         - add driver info and link management

   - Ethernet NICs:
      - Marvell/Aquantia:
         - support reading SFP module info on some AQC100 cards
      - Realtek PCI (r8169):
         - add support for RTL8125cp
      - Realtek USB (r8152):
         - support for the RTL8157 5Gbit chip
         - add 2500baseT EEE status/configuration support

   - Ethernet NICs embedded and off-the-shelf IP:
      - Synopsys (stmmac):
         - cleanup and reorganize SerDes handling and PCS support
         - cleanup descriptor handling and per-platform data
         - cleanup and consolidate MDIO defines and handling
         - shrink driver memory use for internal structures
         - improve Tx IRQ coalescing
         - improve TCP segmentation handling
         - add support for Spacemit K3
      - Cadence (macb):
         - support PHYs that have inband autoneg disabled with GEM
         - support IEEE 802.3az EEE
         - rework usrio capabilities and handling
      - AMD (xgbe):
         - improve power management for S0i3
         - improve TX resilience for link-down handling

   - Virtual:
      - Google cloud vNIC:
         - support larger ring sizes in DQO-QPL mode
         - improve HW-GRO handling
         - support UDP GSO for DQO format
      - PCIe NTB:
         - support queue count configuration

   - Ethernet PHYs:
      - automatically disable PHY autonomous EEE if MAC is in charge
      - Broadcom:
         - add BCM84891/BCM84892 support
      - Micrel:
         - support for LAN9645X internal PHY
      - Realtek:
         - add RTL8224 pair order support
         - support PHY LEDs on RTL8211F-VD
         - support spread spectrum clocking (SSC)
      - Maxlinear:
         - add PHY-level statistics via ethtool

   - Ethernet switches:
      - Maxlinear (mxl862xx):
         - support for bridge offloading
         - support for VLANs
         - support driver statistics

   - Bluetooth:
      - large number of fixes and new device IDs
      - Mediatek:
         - support MT6639 (MT7927)
         - support MT7902 SDIO

   - WiFi:
      - Intel (iwlwifi):
         - UNII-9 and continuing UHR work
      - MediaTek (mt76):
         - mt7996/mt7925 MLO fixes/improvements
         - mt7996 NPU support (HW eth/wifi traffic offload)
      - Qualcomm (ath12k):
         - monitor mode support on IPQ5332
         - basic hwmon temperature reporting
         - support IPQ5424
      - Realtek:
         - add USB RX aggregation to improve performance
         - add USB TX flow control by tracking in-flight URBs

   - Cellular:
      - IPA v5.2 support"

* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
  net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
  wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
  wireguard: allowedips: remove redundant space
  tools: ynl: add sample for wireguard
  wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
  MAINTAINERS: Add netkit selftest files
  selftests/net: Add additional test coverage in nk_qlease
  selftests/net: Split netdevsim tests from HW tests in nk_qlease
  tools/ynl: Make YnlFamily closeable as a context manager
  net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
  net: airoha: Fix VIP configuration for AN7583 SoC
  net: caif: clear client service pointer on teardown
  net: strparser: fix skb_head leak in strp_abort_strp()
  net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
  selftests/bpf: add test for xdp_master_redirect with bond not up
  net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
  net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
  sctp: disable BH before calling udp_tunnel_xmit_skb()
  sctp: fix missing encap_port propagation for GSO fragments
  net: airoha: Rely on net_device pointer in ETS callbacks
  ...

  - Restore the state of the standard black-and-white and 16-color Linux
    logos (no longer auto-enabled since commit 994fcd4b107d747b
    ("video/logo: don't select LOGO_LINUX_MONO and LOGO_LINUX_VGA16 by
    default")).

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/67dd5553e9289757c274d79ce1b13fca33fde25d.1772446429.git.geert@linux-m68k.org

Remove the "michael_mic" crypto_shash algorithm, since it's no longer
used.  Its only users were wireless drivers, which have now been
converted to use the michael_mic() function instead.

It makes sense that no other users ever appeared: Michael MIC is an
insecure algorithm that is specific to WPA TKIP, which itself was an
interim security solution to replace the broken WEP standard.

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260408030651.80336-7-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Maintaining a modular IPv6 stack offers image size savings for specific
setups, this benefit is outweighed by the architectural burden it
imposes on the subsystems on implementation and maintenance. Therefore,
drop it.

Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig
dependencies across the tree that explicitly checked for IPV6=m. In
addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR()
and MODULE_LICENSE().

This is also replacing module_init() by device_initcall(). It is not
possible to use fs_initcall() as IPv4 does because that creates a race
condition on IPv6 addrconf.

Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y
except for m68k as according to the bloat-o-meter the image is
increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on
this architecture by default. This is aligned with m68k RAM requirements
and recommendations [1].

[1] http://www.linux-m68k.org/faq/ram.html

Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # arm64
Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The kconfig options for generic crypto API modules have traditionally
*not* had a "_GENERIC" suffix.  Also, the "_GENERIC" suffix will make
even less sense once the architecture-optimized SM3 code is moved into
lib/crypto/ and the "sm3" crypto_shash is reimplemented on top of that.

Thus, rename CRYPTO_SM3_GENERIC to CRYPTO_SM3.

Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

Pull non-MM updates from Andrew Morton:

 - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
   disk space by teaching ocfs2 to reclaim suballocator block group
   space (Heming Zhao)

 - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
   ARRAY_END() macro and uses it in various places (Alejandro Colomar)

 - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
   the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
   page size (Pnina Feder)

 - "kallsyms: Prevent invalid access when showing module buildid" cleans
   up kallsyms code related to module buildid and fixes an invalid
   access crash when printing backtraces (Petr Mladek)

 - "Address page fault in ima_restore_measurement_list()" fixes a
   kexec-related crash that can occur when booting the second-stage
   kernel on x86 (Harshit Mogalapalli)

 - "kho: ABI headers and Documentation updates" updates the kexec
   handover ABI documentation (Mike Rapoport)

 - "Align atomic storage" adds the __aligned attribute to atomic_t and
   atomic64_t definitions to get natural alignment of both types on
   csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)

 - "kho: clean up page initialization logic" simplifies the page
   initialization logic in kho_restore_page() (Pratyush Yadav)

 - "Unload linux/kernel.h" moves several things out of kernel.h and into
   more appropriate places (Yury Norov)

 - "don't abuse task_struct.group_leader" removes the usage of
   ->group_leader when it is "obviously unnecessary" (Oleg Nesterov)

 - "list private v2 & luo flb" adds some infrastructure improvements to
   the live update orchestrator (Pasha Tatashin)

* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
  watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
  procfs: fix missing RCU protection when reading real_parent in do_task_stat()
  watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
  kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
  kho: fix doc for kho_restore_pages()
  tests/liveupdate: add in-kernel liveupdate test
  liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
  liveupdate: luo_file: Use private list
  list: add kunit test for private list primitives
  list: add primitives for private list manipulations
  delayacct: fix uapi timespec64 definition
  panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
  netclassid: use thread_group_leader(p) in update_classid_task()
  RDMA/umem: don't abuse current->group_leader
  drm/pan*: don't abuse current->group_leader
  drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
  drm/amdgpu: don't abuse current->group_leader
  android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
  android/binder: don't abuse current->group_leader
  kho: skip memoryless NUMA nodes when reserving scratch areas
  ...

This patch converts the existing glob selftest (lib/globtest.c) to use the
KUnit framework (lib/tests/glob_kunit.c).

The new test:

- Migrates all 64 test cases from the original test to the KUnit suite.
- Removes the custom 'verbose' module parameter as KUnit handles logging.
- Updates Kconfig.debug and Makefile to support the new KUnit test.
- Updates Kconfig and Makefile to remove the original selftest.
- Updates GLOB_SELFTEST to GLOB_KUNIT_TEST for arch/m68k/configs.

This commit is verified by `./tools/testing/kunit/kunit.py run'
with the .kunit/.kunitconfig:

CONFIG_KUNIT=y
CONFIG_GLOB_KUNIT_TEST=y

Link: https://lkml.kernel.org/r/20260108120753.27339-1-note351@hotmail.com
Signed-off-by: Kir Chou <note351@hotmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: <kirchou@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Move lib/test_min_heap.c to lib/tests/min_heap_kunit.c and convert it to
use KUnit.

This change switches the ad-hoc test code to standard KUnit test cases. 
The test data remains the same, but the verification logic is updated to
use KUNIT_EXPECT_* macros.

Also remove CONFIG_TEST_MIN_HEAP from arch/*/configs/* because it is no
longer used.  The new CONFIG_MIN_HEAP_KUNIT_TEST will be automatically
enabled by CONFIG_KUNIT_ALL_TESTS.

The reasons for converting to KUnit are:

1. Standardization:
    Switching from ad-hoc printk-based reporting to the standard
    KTAP format makes it easier for CI systems to parse and report test
    results

2. Better Diagnostics:
    Using KUNIT_EXPECT_* macros automatically provides detailed
    diagnostics on failure.

3. Tooling Integration:
    It allows the test to be managed and executed using standard
    KUnit tools.

Link: https://lkml.kernel.org/r/20251221133516.321846-1-sakamo.ryota@gmail.com
Signed-off-by: Ryota Sakamoto <sakamo.ryota@gmail.com>
Acked-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David Gow <davidgow@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Move lib/test_uuid.c to lib/tests/uuid_kunit.c and convert it to use KUnit.

This change switches the ad-hoc test code to standard KUnit test cases. 
The test data remains the same, but the verification logic is updated to
use KUNIT_EXPECT_* macros.

Also remove CONFIG_TEST_UUID from arch/*/configs/* because it is no longer
used.  The new CONFIG_UUID_KUNIT_TEST will be automatically enabled by
CONFIG_KUNIT_ALL_TESTS.

[lukas.bulwahn@redhat.com: MAINTAINERS: adjust file entry in UUID HELPERS]
  Link: https://lkml.kernel.org/r/20251217053907.2778515-1-lukas.bulwahn@redhat.com
Link: https://lkml.kernel.org/r/20251215134322.12949-1-sakamo.ryota@gmail.com
Signed-off-by: Ryota Sakamoto <sakamo.ryota@gmail.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>