<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/arch/m68k, branch v4.4.148</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>m68k/mm: Adjust VM area to be unmapped by gap size for __iounmap()</title>
<updated>2018-07-03T09:21:26+00:00</updated>
<author>
<name>Michael Schmitz</name>
<email>schmitzmic@gmail.com</email>
</author>
<published>2018-05-14T11:10:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=af0825dc16276df84164fc838279813033d910f7'/>
<id>af0825dc16276df84164fc838279813033d910f7</id>
<content type='text'>
commit 3f90f9ef2dda316d64e420d5d51ba369587ccc55 upstream.

If 020/030 support is enabled, get_io_area() leaves an IO_SIZE gap
between mappings which is added to the vm_struct representing the
mapping.  __ioremap() uses the actual requested size (after alignment),
while __iounmap() is passed the size from the vm_struct.

On 020/030, early termination descriptors are used to set up mappings of
extent 'size', which are validated on unmapping. The unmapped gap of
size IO_SIZE defeats the sanity check of the pmd tables, causing
__iounmap() to loop forever on 030.

On 040/060, unmapping of page table entries does not check for a valid
mapping, so the umapping loop always completes there.

Adjust size to be unmapped by the gap that had been added in the
vm_struct prior.

This fixes the hang in atari_platform_init() reported a long time ago,
and a similar one reported by Finn recently (addressed by removing
ioremap() use from the SWIM driver.

Tested on my Falcon in 030 mode - untested but should work the same on
040/060 (the extra page tables cleared there would never have been set
up anyway).

Signed-off-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
[geert: Minor commit description improvements]
[geert: This was fixed in 2.4.23, but not in 2.5.x]
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 3f90f9ef2dda316d64e420d5d51ba369587ccc55 upstream.

If 020/030 support is enabled, get_io_area() leaves an IO_SIZE gap
between mappings which is added to the vm_struct representing the
mapping.  __ioremap() uses the actual requested size (after alignment),
while __iounmap() is passed the size from the vm_struct.

On 020/030, early termination descriptors are used to set up mappings of
extent 'size', which are validated on unmapping. The unmapped gap of
size IO_SIZE defeats the sanity check of the pmd tables, causing
__iounmap() to loop forever on 030.

On 040/060, unmapping of page table entries does not check for a valid
mapping, so the umapping loop always completes there.

Adjust size to be unmapped by the gap that had been added in the
vm_struct prior.

This fixes the hang in atari_platform_init() reported a long time ago,
and a similar one reported by Finn recently (addressed by removing
ioremap() use from the SWIM driver.

Tested on my Falcon in 030 mode - untested but should work the same on
040/060 (the extra page tables cleared there would never have been set
up anyway).

Signed-off-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
[geert: Minor commit description improvements]
[geert: This was fixed in 2.4.23, but not in 2.5.x]
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>m68k: set dma and coherent masks for platform FEC ethernets</title>
<updated>2018-05-30T05:49:09+00:00</updated>
<author>
<name>Greg Ungerer</name>
<email>gerg@linux-m68k.org</email>
</author>
<published>2018-03-28T07:12:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b1a557b92ddd6ffa81fcf5f47c1beda55f8d96bc'/>
<id>b1a557b92ddd6ffa81fcf5f47c1beda55f8d96bc</id>
<content type='text'>
[ Upstream commit f61e64310b75733d782e930d1fb404b84699eed6 ]

As of commit 205e1b7f51e4 ("dma-mapping: warn when there is no
coherent_dma_mask") the Freescale FEC driver is issuing the following
warning on driver initialization on ColdFire systems:

WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 0x40159e20
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc7-dirty #4
Stack from 41833dd8:
        41833dd8 40259c53 40025534 40279e26 00000003 00000000 4004e514 41827000
        400255de 40244e42 00000204 40159e20 00000009 00000000 00000000 4024531d
        40159e20 40244e42 00000204 00000000 00000000 00000000 00000007 00000000
        00000000 40279e26 4028d040 40226576 4003ae88 40279e26 418273f6 41833ef8
        7fffffff 418273f2 41867028 4003c9a2 4180ac6c 00000004 41833f8c 4013e71c
        40279e1c 40279e26 40226c16 4013ced2 40279e26 40279e58 4028d040 00000000
Call Trace:
        [&lt;40025534&gt;] 0x40025534
 [&lt;4004e514&gt;] 0x4004e514
 [&lt;400255de&gt;] 0x400255de
 [&lt;40159e20&gt;] 0x40159e20
 [&lt;40159e20&gt;] 0x40159e20

It is not fatal, the driver and the system continue to function normally.

As per the warning the coherent_dma_mask is not set on this device.
There is nothing special about the DMA memory coherency on this hardware
so we can just set the mask to 32bits in the platform data for the FEC
ethernet devices.

Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit f61e64310b75733d782e930d1fb404b84699eed6 ]

As of commit 205e1b7f51e4 ("dma-mapping: warn when there is no
coherent_dma_mask") the Freescale FEC driver is issuing the following
warning on driver initialization on ColdFire systems:

WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 0x40159e20
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc7-dirty #4
Stack from 41833dd8:
        41833dd8 40259c53 40025534 40279e26 00000003 00000000 4004e514 41827000
        400255de 40244e42 00000204 40159e20 00000009 00000000 00000000 4024531d
        40159e20 40244e42 00000204 00000000 00000000 00000000 00000007 00000000
        00000000 40279e26 4028d040 40226576 4003ae88 40279e26 418273f6 41833ef8
        7fffffff 418273f2 41867028 4003c9a2 4180ac6c 00000004 41833f8c 4013e71c
        40279e1c 40279e26 40226c16 4013ced2 40279e26 40279e58 4028d040 00000000
Call Trace:
        [&lt;40025534&gt;] 0x40025534
 [&lt;4004e514&gt;] 0x4004e514
 [&lt;400255de&gt;] 0x400255de
 [&lt;40159e20&gt;] 0x40159e20
 [&lt;40159e20&gt;] 0x40159e20

It is not fatal, the driver and the system continue to function normally.

As per the warning the coherent_dma_mask is not set on this device.
There is nothing special about the DMA memory coherency on this hardware
so we can just set the mask to 32bits in the platform data for the FEC
ethernet devices.

Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>m68k: Fix ndelay() macro</title>
<updated>2016-12-15T16:49:23+00:00</updated>
<author>
<name>Boris Brezillon</name>
<email>boris.brezillon@free-electrons.com</email>
</author>
<published>2016-10-28T15:12:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=f03531d091255156cf8c865b969377f01750e97a'/>
<id>f03531d091255156cf8c865b969377f01750e97a</id>
<content type='text'>
commit 7e251bb21ae08ca2e4fb28cc0981fac2685a8efa upstream.

The current ndelay() macro definition has an extra semi-colon at the
end of the line thus leading to a compilation error when ndelay is used
in a conditional block without curly braces like this one:

	if (cond)
		ndelay(t);
	else
		...

which, after the preprocessor pass gives:

	if (cond)
		m68k_ndelay(t);;
	else
		...

thus leading to the following gcc error:

	error: 'else' without a previous 'if'

Remove this extra semi-colon.

Signed-off-by: Boris Brezillon &lt;boris.brezillon@free-electrons.com&gt;
Fixes: c8ee038bd1488 ("m68k: Implement ndelay() based on the existing udelay() logic")
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 7e251bb21ae08ca2e4fb28cc0981fac2685a8efa upstream.

The current ndelay() macro definition has an extra semi-colon at the
end of the line thus leading to a compilation error when ndelay is used
in a conditional block without curly braces like this one:

	if (cond)
		ndelay(t);
	else
		...

which, after the preprocessor pass gives:

	if (cond)
		m68k_ndelay(t);;
	else
		...

thus leading to the following gcc error:

	error: 'else' without a previous 'if'

Remove this extra semi-colon.

Signed-off-by: Boris Brezillon &lt;boris.brezillon@free-electrons.com&gt;
Fixes: c8ee038bd1488 ("m68k: Implement ndelay() based on the existing udelay() logic")
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>m68k: Wire up mlock2</title>
<updated>2015-11-22T10:35:26+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert@linux-m68k.org</email>
</author>
<published>2015-11-09T09:53:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=21d380e54c30b5b15aa4167e2458bfe4e4862427'/>
<id>21d380e54c30b5b15aa4167e2458bfe4e4862427</id>
<content type='text'>
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Greg Ungerer &lt;gerg@uclinux.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Greg Ungerer &lt;gerg@uclinux.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>m68knommu: Add missing initialization of max_pfn and {min,max}_low_pfn</title>
<updated>2015-11-22T10:35:25+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert@linux-m68k.org</email>
</author>
<published>2015-11-15T10:46:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b66f55cdba5559dedd295356bb5138c5ceadb694'/>
<id>b66f55cdba5559dedd295356bb5138c5ceadb694</id>
<content type='text'>
If max_pfn is not initialized, the block layer may use wrong DMA masks.

Replace open-coded shifts by PFN_DOWN(), and drop the "0 on coldfire"
comment, as it is not even true on all Coldfires, let alone all
m68knommu platforms.

Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Greg Ungerer &lt;gerg@uclinux.org&gt;
Tested-By: Greg Ungerer &lt;gerg@uclinux.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If max_pfn is not initialized, the block layer may use wrong DMA masks.

Replace open-coded shifts by PFN_DOWN(), and drop the "0 on coldfire"
comment, as it is not even true on all Coldfires, let alone all
m68knommu platforms.

Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Greg Ungerer &lt;gerg@uclinux.org&gt;
Tested-By: Greg Ungerer &lt;gerg@uclinux.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>m68k/mm: sun3 - Add missing initialization of max_pfn and {min,max}_low_pfn</title>
<updated>2015-11-22T10:35:25+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert@linux-m68k.org</email>
</author>
<published>2015-11-15T10:41:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c73ec319339030a455e7641e7020fc14093a4153'/>
<id>c73ec319339030a455e7641e7020fc14093a4153</id>
<content type='text'>
If max_pfn is not initialized, the various /proc/kpage* files are empty,
and selftests/vm/mlock2-tests will fail. max_pfn is also used by the
block layer to calculate DMA masks.

Switch from init_bootmem_node() to init_bootmem(), as there's only one
memory node on Sun-3. This will initialize min_low_pfn and max_low_pfn,
which was also not done before.

Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Greg Ungerer &lt;gerg@uclinux.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If max_pfn is not initialized, the various /proc/kpage* files are empty,
and selftests/vm/mlock2-tests will fail. max_pfn is also used by the
block layer to calculate DMA masks.

Switch from init_bootmem_node() to init_bootmem(), as there's only one
memory node on Sun-3. This will initialize min_low_pfn and max_low_pfn,
which was also not done before.

Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Greg Ungerer &lt;gerg@uclinux.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>m68k/mm: m54xx - Add missing initialization of max_pfn</title>
<updated>2015-11-22T10:35:24+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert@linux-m68k.org</email>
</author>
<published>2015-11-15T10:36:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=4722b8feb0dc53a01a051f36846bef5a95d91a46'/>
<id>4722b8feb0dc53a01a051f36846bef5a95d91a46</id>
<content type='text'>
If max_pfn is not initialized, the various /proc/kpage* files are empty,
and selftests/vm/mlock2-tests will fail. max_pfn is also used by the
block layer to calculate DMA masks.

Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Greg Ungerer &lt;gerg@uclinux.org&gt;
Tested-by: Greg Ungerer &lt;gerg@uclinux.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If max_pfn is not initialized, the various /proc/kpage* files are empty,
and selftests/vm/mlock2-tests will fail. max_pfn is also used by the
block layer to calculate DMA masks.

Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Greg Ungerer &lt;gerg@uclinux.org&gt;
Tested-by: Greg Ungerer &lt;gerg@uclinux.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>m68k/mm: motorola - Add missing initialization of max_pfn</title>
<updated>2015-11-22T10:35:24+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert@linux-m68k.org</email>
</author>
<published>2015-11-15T10:34:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=79ae4fa5c0e1bc8000c39d3a78cb67828906a0e5'/>
<id>79ae4fa5c0e1bc8000c39d3a78cb67828906a0e5</id>
<content type='text'>
If max_pfn is not initialized, the various /proc/kpage* files are empty,
and selftests/vm/mlock2-tests will fail. max_pfn is also used by the
block layer to calculate DMA masks.

Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Greg Ungerer &lt;gerg@uclinux.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If max_pfn is not initialized, the various /proc/kpage* files are empty,
and selftests/vm/mlock2-tests will fail. max_pfn is also used by the
block layer to calculate DMA masks.

Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Greg Ungerer &lt;gerg@uclinux.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>block: change -&gt;make_request_fn() and users to return a queue cookie</title>
<updated>2015-11-07T17:40:46+00:00</updated>
<author>
<name>Jens Axboe</name>
<email>axboe@fb.com</email>
</author>
<published>2015-11-05T17:41:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=dece16353ef47d8d33f5302bc158072a9d65e26f'/>
<id>dece16353ef47d8d33f5302bc158072a9d65e26f</id>
<content type='text'>
No functional changes in this patch, but it prepares us for returning
a more useful cookie related to the IO that was queued up.

Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
Acked-by: Christoph Hellwig &lt;hch@lst.de&gt;
Acked-by: Keith Busch &lt;keith.busch@intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
No functional changes in this patch, but it prepares us for returning
a more useful cookie related to the IO that was queued up.

Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
Acked-by: Christoph Hellwig &lt;hch@lst.de&gt;
Acked-by: Keith Busch &lt;keith.busch@intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next</title>
<updated>2015-11-04T17:41:05+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2015-11-04T17:41:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b0f85fa11aefc4f3e03306b4cd47f113bd57dcba'/>
<id>b0f85fa11aefc4f3e03306b4cd47f113bd57dcba</id>
<content type='text'>
Pull networking updates from David Miller:

Changes of note:

 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.

 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
    David Ahern.

 3) Allow the user to ask for the statistics to be filtered out of
    ipv4/ipv6 address netlink dumps.  From Sowmini Varadhan.

 4) More work to pass the network namespace context around deep into
    various packet path APIs, starting with the netfilter hooks.  From
    Eric W Biederman.

 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
    Richter.

 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.

 7) Support Very High Throughput in wireless MESH code, from Bob
    Copeland.

 8) Allow setting the ageing_time in switchdev/rocker.  From Scott
    Feldman.

 9) Properly autoload L2TP type modules, from Stephen Hemminger.

10) Fix and enable offload features by default in 8139cp driver, from
    David Woodhouse.

11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
    Jiri Benc.

12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
    Opstad.

13) Fix IPSEC flowcache overflows on large systems, from Steffen
    Klassert.

14) Convert bridging to track VLANs using rhashtable entries rather than
    a bitmap.  From Nikolay Aleksandrov.

15) Make TCP listener handling completely lockless, this is a major
    accomplishment.  Incoming request sockets now live in the
    established hash table just like any other socket too.

    From Eric Dumazet.

15) Provide more bridging attributes to netlink, from Nikolay
    Aleksandrov.

16) Use hash based algorithm for ipv4 multipath routing, this was very
    long overdue.  From Peter Nørlund.

17) Several y2038 cures, mostly avoiding timespec.  From Arnd Bergmann.

18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.

19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet.  This
    influences the port binding selection logic used by SO_REUSEPORT.

20) Add ipv6 support to VRF, from David Ahern.

21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.

22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.

23) Implement RACK loss recovery in TCP, from Yuchung Cheng.

24) Support multipath routes in MPLS, from Roopa Prabhu.

25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
    Dumazet.

26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
    Sudarsana Kalluru.

27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
    Sowa.

28) Support ipv6 geneve tunnels, from John W Linville.

29) Add flood control support to switchdev layer, from Ido Schimmel.

30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
    Hannes Frederic Sowa.

31) Support persistent maps and progs in bpf, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
  sh_eth: use DMA barriers
  switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
  net: sched: kill dead code in sch_choke.c
  irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
  net: dsa: mv88e6xxx: include DSA ports in VLANs
  net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
  net/core: fix for_each_netdev_feature
  vlan: Invoke driver vlan hooks only if device is present
  arcnet/com20020: add LEDS_CLASS dependency
  bpf, verifier: annotate verbose printer with __printf
  dp83640: Only wait for timestamps for packets with timestamping enabled.
  ptp: Change ptp_class to a proper bitmask
  dp83640: Prune rx timestamp list before reading from it
  dp83640: Delay scheduled work.
  dp83640: Include hash in timestamp/packet matching
  ipv6: fix tunnel error handling
  net/mlx5e: Fix LSO vlan insertion
  net/mlx5e: Re-eanble client vlan TX acceleration
  net/mlx5e: Return error in case mlx5e_set_features() fails
  net/mlx5e: Don't allow more than max supported channels
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull networking updates from David Miller:

Changes of note:

 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.

 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
    David Ahern.

 3) Allow the user to ask for the statistics to be filtered out of
    ipv4/ipv6 address netlink dumps.  From Sowmini Varadhan.

 4) More work to pass the network namespace context around deep into
    various packet path APIs, starting with the netfilter hooks.  From
    Eric W Biederman.

 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
    Richter.

 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.

 7) Support Very High Throughput in wireless MESH code, from Bob
    Copeland.

 8) Allow setting the ageing_time in switchdev/rocker.  From Scott
    Feldman.

 9) Properly autoload L2TP type modules, from Stephen Hemminger.

10) Fix and enable offload features by default in 8139cp driver, from
    David Woodhouse.

11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
    Jiri Benc.

12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
    Opstad.

13) Fix IPSEC flowcache overflows on large systems, from Steffen
    Klassert.

14) Convert bridging to track VLANs using rhashtable entries rather than
    a bitmap.  From Nikolay Aleksandrov.

15) Make TCP listener handling completely lockless, this is a major
    accomplishment.  Incoming request sockets now live in the
    established hash table just like any other socket too.

    From Eric Dumazet.

15) Provide more bridging attributes to netlink, from Nikolay
    Aleksandrov.

16) Use hash based algorithm for ipv4 multipath routing, this was very
    long overdue.  From Peter Nørlund.

17) Several y2038 cures, mostly avoiding timespec.  From Arnd Bergmann.

18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.

19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet.  This
    influences the port binding selection logic used by SO_REUSEPORT.

20) Add ipv6 support to VRF, from David Ahern.

21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.

22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.

23) Implement RACK loss recovery in TCP, from Yuchung Cheng.

24) Support multipath routes in MPLS, from Roopa Prabhu.

25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
    Dumazet.

26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
    Sudarsana Kalluru.

27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
    Sowa.

28) Support ipv6 geneve tunnels, from John W Linville.

29) Add flood control support to switchdev layer, from Ido Schimmel.

30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
    Hannes Frederic Sowa.

31) Support persistent maps and progs in bpf, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
  sh_eth: use DMA barriers
  switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
  net: sched: kill dead code in sch_choke.c
  irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
  net: dsa: mv88e6xxx: include DSA ports in VLANs
  net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
  net/core: fix for_each_netdev_feature
  vlan: Invoke driver vlan hooks only if device is present
  arcnet/com20020: add LEDS_CLASS dependency
  bpf, verifier: annotate verbose printer with __printf
  dp83640: Only wait for timestamps for packets with timestamping enabled.
  ptp: Change ptp_class to a proper bitmask
  dp83640: Prune rx timestamp list before reading from it
  dp83640: Delay scheduled work.
  dp83640: Include hash in timestamp/packet matching
  ipv6: fix tunnel error handling
  net/mlx5e: Fix LSO vlan insertion
  net/mlx5e: Re-eanble client vlan TX acceleration
  net/mlx5e: Return error in case mlx5e_set_features() fails
  net/mlx5e: Don't allow more than max supported channels
  ...
</pre>
</div>
</content>
</entry>
</feed>
