linux-toradex.git/arch/m68k, branch v5.16-rc3 Linux kernel for Apalis and Colibri modules Merge tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic 2021-11-25T18:41:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-25T18:41:28+00:00 b501b85957deb17f1fe0a861fee820255519d526 Pull asm-generic syscall table update from Arnd Bergmann: "André Almeida sends an update for the newly added futex_waitv syscall that was initially only added to a few architectures. Some additional ones have since made it through architecture maintainer trees, this finishes the remaining ones" * tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: futex: Wireup futex_waitv syscall 
Pull asm-generic syscall table update from Arnd Bergmann:
 "André Almeida sends an update for the newly added futex_waitv syscall
  that was initially only added to a few architectures.

  Some additional ones have since made it through architecture
  maintainer trees, this finishes the remaining ones"

* tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  futex: Wireup futex_waitv syscall
Merge tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache 2021-11-25T18:13:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-25T18:13:56+00:00 79941493ff3e75219fd1d37a09b46a604e9e55ac Pull folio fixes from Matthew Wilcox: "In the course of preparing the folio changes for iomap for next merge window, we discovered some problems that would be nice to address now: - Renaming multi-page folios to large folios. mapping_multi_page_folio_support() is just a little too long, so we settled on mapping_large_folio_support(). That meant renaming, eg folio_test_multi() to folio_test_large(). Rename AS_THP_SUPPORT to match - I hadn't included folio wrappers for zero_user_segments(), etc. Also, multi-page^W^W large folio support is now independent of CONFIG_TRANSPARENT_HUGEPAGE, so machines with HIGHMEM always need to fall back to the out-of-line zero_user_segments(). Remove FS_THP_SUPPORT to match - The build bots finally got round to telling me that I missed a couple of architectures when adding flush_dcache_folio(). Christoph suggested that we just add linux/cacheflush.h and not rely on asm-generic/cacheflush.h" * tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache: mm: Add functions to zero portions of a folio fs: Rename AS_THP_SUPPORT and mapping_thp_support fs: Remove FS_THP_SUPPORT mm: Remove folio_test_single mm: Rename folio_test_multi to folio_test_large Add linux/cacheflush.h 
Pull folio fixes from Matthew Wilcox:
 "In the course of preparing the folio changes for iomap for next merge
  window, we discovered some problems that would be nice to address now:

   - Renaming multi-page folios to large folios.

     mapping_multi_page_folio_support() is just a little too long, so we
     settled on mapping_large_folio_support(). That meant renaming, eg
     folio_test_multi() to folio_test_large().

     Rename AS_THP_SUPPORT to match

   - I hadn't included folio wrappers for zero_user_segments(), etc.
     Also, multi-page^W^W large folio support is now independent of
     CONFIG_TRANSPARENT_HUGEPAGE, so machines with HIGHMEM always need
     to fall back to the out-of-line zero_user_segments().

     Remove FS_THP_SUPPORT to match

   - The build bots finally got round to telling me that I missed a
     couple of architectures when adding flush_dcache_folio(). Christoph
     suggested that we just add linux/cacheflush.h and not rely on
     asm-generic/cacheflush.h"

* tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache:
  mm: Add functions to zero portions of a folio
  fs: Rename AS_THP_SUPPORT and mapping_thp_support
  fs: Remove FS_THP_SUPPORT
  mm: Remove folio_test_single
  mm: Rename folio_test_multi to folio_test_large
  Add linux/cacheflush.h
futex: Wireup futex_waitv syscall 2021-11-25T13:26:12+00:00 André Almeida andrealmeid@collabora.com 2021-11-24T13:21:12+00:00 a0eb2da92b715d0c97b96b09979689ea09faefe6 Wireup futex_waitv syscall for all remaining archs. Signed-off-by: André Almeida <andrealmeid@collabora.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Wireup futex_waitv syscall for all remaining archs.

Signed-off-by: André Almeida <andrealmeid@collabora.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
signal: Replace force_fatal_sig with force_exit_sig when in doubt 2021-11-19T15:15:58+00:00 Eric W. Biederman ebiederm@xmission.com 2021-11-18T20:23:21+00:00 fcb116bc43c8c37c052530ead79872f8b2615711 Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Add force_exit_sig and use it instead of force_fatal_sig where historically the code has directly called do_exit. This has the implementation benefits of going through the signal exit path (including generating core dumps) without the danger of allowing userspace to ignore or change these signals. This avoids userspace regressions as older kernels exited with do_exit which debuggers also can not intercept. In the future is should be possible to improve the quality of implementation of the kernel by changing some of these force_exit_sig calls to force_fatal_sig. That can be done where it matters on a case-by-case basis with careful analysis. Reported-by: Kyle Huey <me@kylehuey.com> Reported-by: kernel test robot <oliver.sang@intel.com> [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <khuey@kylehuey.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.

Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.

Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit.  This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.

This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.

In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig.  That can be done where it matters on
a case-by-case basis with careful analysis.

Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die")
Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV")
Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler")
Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig")
Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails")
Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit")
Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.")
Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure")
Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add linux/cacheflush.h 2021-11-17T15:36:15+00:00 Matthew Wilcox (Oracle) willy@infradead.org 2021-11-06T21:13:35+00:00 522a0032af005502507f5f81ae64fdcc82b5d068 Many architectures do not include asm-generic/cacheflush.h, so turn the includes on their head and add linux/cacheflush.h which includes asm/cacheflush.h. Move the flush_dcache_folio() declaration from asm-generic/cacheflush.h to linux/cacheflush.h and change linux/highmem.h to include linux/cacheflush.h instead of asm/cacheflush.h so that all necessary places will see flush_dcache_folio(). More functions should have their default implementations moved in the future, but those are for follow-on patches. This fixes csky, sparc and sparc64 which were missed in the commit which added flush_dcache_folio(). Fixes: 08b0b0059bf1 ("mm: Add flush_dcache_folio()") Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> 
Many architectures do not include asm-generic/cacheflush.h, so turn
the includes on their head and add linux/cacheflush.h which includes
asm/cacheflush.h.

Move the flush_dcache_folio() declaration from asm-generic/cacheflush.h
to linux/cacheflush.h and change linux/highmem.h to include
linux/cacheflush.h instead of asm/cacheflush.h so that all necessary
places will see flush_dcache_folio().

More functions should have their default implementations moved in the
future, but those are for follow-on patches.  This fixes csky, sparc and
sparc64 which were missed in the commit which added flush_dcache_folio().

Fixes: 08b0b0059bf1 ("mm: Add flush_dcache_folio()")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Merge tag 'm68knommu-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu 2021-11-11T22:22:05+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-11T22:22:05+00:00 6d76f6eb46cbf8334b37352f2c2908329d028286 Pull m68knommu updates from Greg Ungerer: "Only two changes. One removes the now unused CONFIG_MCPU32 symbol. The other sets a default for the CONFIG_MEMORY_RESERVE config symbol (this aids scripting and other automation) so you don't interactively get asked for a value at configure time. Summary: - remove unused CONFIG_MCPU32 symbol - default CONFIG_MEMORY_RESERVE value (for scripting)" * tag 'm68knommu-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: Remove MCPU32 config symbol m68k: set a default value for MEMORY_RESERVE 
Pull m68knommu updates from Greg Ungerer:
 "Only two changes.

  One removes the now unused CONFIG_MCPU32 symbol. The other sets a
  default for the CONFIG_MEMORY_RESERVE config symbol (this aids
  scripting and other automation) so you don't interactively get asked
  for a value at configure time.

  Summary:

   - remove unused CONFIG_MCPU32 symbol

   - default CONFIG_MEMORY_RESERVE value (for scripting)"

* tag 'm68knommu-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: Remove MCPU32 config symbol
  m68k: set a default value for MEMORY_RESERVE
Merge branch 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace 2021-11-11T00:15:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-11T00:15:54+00:00 5147da902e0dd162c6254a61e4c57f21b60a9b1c Pull exit cleanups from Eric Biederman: "While looking at some issues related to the exit path in the kernel I found several instances where the code is not using the existing abstractions properly. This set of changes introduces force_fatal_sig a way of sending a signal and not allowing it to be caught, and corrects the misuse of the existing abstractions that I found. A lot of the misuse of the existing abstractions are silly things such as doing something after calling a no return function, rolling BUG by hand, doing more work than necessary to terminate a kernel thread, or calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL). In the review a deficiency in force_fatal_sig and force_sig_seccomp where ptrace or sigaction could prevent the delivery of the signal was found. I have added a change that adds SA_IMMUTABLE to change that makes it impossible to interrupt the delivery of those signals, and allows backporting to fix force_sig_seccomp And Arnd found an issue where a function passed to kthread_run had the wrong prototype, and after my cleanup was failing to build." * 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits) soc: ti: fix wkup_m3_rproc_boot_thread return type signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV) exit/r8188eu: Replace the macro thread_exit with a simple return 0 exit/rtl8712: Replace the macro thread_exit with a simple return 0 exit/rtl8723bs: Replace the macro thread_exit with a simple return 0 signal/x86: In emulate_vsyscall force a signal instead of calling do_exit signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails exit/syscall_user_dispatch: Send ordinary signals on failure signal: Implement force_fatal_sig exit/kthread: Have kernel threads return instead of calling do_exit signal/s390: Use force_sigsegv in default_trap_handler signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved. signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON signal/sparc: In setup_tsb_params convert open coded BUG into BUG signal/powerpc: On swapcontext failure force SIGSEGV signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL) signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT signal/sparc32: Remove unreachable do_exit in do_sparc_fault ... 
Pull exit cleanups from Eric Biederman:
 "While looking at some issues related to the exit path in the kernel I
  found several instances where the code is not using the existing
  abstractions properly.

  This set of changes introduces force_fatal_sig a way of sending a
  signal and not allowing it to be caught, and corrects the misuse of
  the existing abstractions that I found.

  A lot of the misuse of the existing abstractions are silly things such
  as doing something after calling a no return function, rolling BUG by
  hand, doing more work than necessary to terminate a kernel thread, or
  calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).

  In the review a deficiency in force_fatal_sig and force_sig_seccomp
  where ptrace or sigaction could prevent the delivery of the signal was
  found. I have added a change that adds SA_IMMUTABLE to change that
  makes it impossible to interrupt the delivery of those signals, and
  allows backporting to fix force_sig_seccomp

  And Arnd found an issue where a function passed to kthread_run had the
  wrong prototype, and after my cleanup was failing to build."

* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
  soc: ti: fix wkup_m3_rproc_boot_thread return type
  signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
  signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
  exit/r8188eu: Replace the macro thread_exit with a simple return 0
  exit/rtl8712: Replace the macro thread_exit with a simple return 0
  exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
  signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
  signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
  signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
  exit/syscall_user_dispatch: Send ordinary signals on failure
  signal: Implement force_fatal_sig
  exit/kthread: Have kernel threads return instead of calling do_exit
  signal/s390: Use force_sigsegv in default_trap_handler
  signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
  signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
  signal/sparc: In setup_tsb_params convert open coded BUG into BUG
  signal/powerpc: On swapcontext failure force SIGSEGV
  signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
  signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
  signal/sparc32: Remove unreachable do_exit in do_sparc_fault
  ...
Merge tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild 2021-11-08T17:15:45+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-08T17:15:45+00:00 1e9ed9360f80d13e41684ca458f01fdf922c7c57 Pull Kbuild updates from Masahiro Yamada: - Remove the global -isystem compiler flag, which was made possible by the introduction of <linux/stdarg.h> - Improve the Kconfig help to print the location in the top menu level - Fix "FORCE prerequisite is missing" build warning for sparc - Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate a zstd-compressed tarball - Prevent gen_init_cpio tool from generating a corrupted cpio when KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later - Misc cleanups * tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits) kbuild: use more subdir- for visiting subdirectories while cleaning sh: remove meaningless archclean line initramfs: Check timestamp to prevent broken cpio archive kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug gen_init_cpio: add static const qualifiers kbuild: Add make tarzst-pkg build option scripts: update the comments of kallsyms support sparc: Add missing "FORCE" target when using if_changed kconfig: refactor conf_touch_dep() kconfig: refactor conf_write_dep() kconfig: refactor conf_write_autoconf() kconfig: add conf_get_autoheader_name() kconfig: move sym_escape_string_value() to confdata.c kconfig: refactor listnewconfig code kconfig: refactor conf_write_symbol() kconfig: refactor conf_write_heading() kconfig: remove 'const' from the return type of sym_escape_string_value() kconfig: rename a variable in the lexer to a clearer name kconfig: narrow the scope of variables in the lexer kconfig: Create links to main menu items in search ... 
Pull Kbuild updates from Masahiro Yamada:

 - Remove the global -isystem compiler flag, which was made possible by
   the introduction of <linux/stdarg.h>

 - Improve the Kconfig help to print the location in the top menu level

 - Fix "FORCE prerequisite is missing" build warning for sparc

 - Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
   generate a zstd-compressed tarball

 - Prevent gen_init_cpio tool from generating a corrupted cpio when
   KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later

 - Misc cleanups

* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
  kbuild: use more subdir- for visiting subdirectories while cleaning
  sh: remove meaningless archclean line
  initramfs: Check timestamp to prevent broken cpio archive
  kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
  gen_init_cpio: add static const qualifiers
  kbuild: Add make tarzst-pkg build option
  scripts: update the comments of kallsyms support
  sparc: Add missing "FORCE" target when using if_changed
  kconfig: refactor conf_touch_dep()
  kconfig: refactor conf_write_dep()
  kconfig: refactor conf_write_autoconf()
  kconfig: add conf_get_autoheader_name()
  kconfig: move sym_escape_string_value() to confdata.c
  kconfig: refactor listnewconfig code
  kconfig: refactor conf_write_symbol()
  kconfig: refactor conf_write_heading()
  kconfig: remove 'const' from the return type of sym_escape_string_value()
  kconfig: rename a variable in the lexer to a clearer name
  kconfig: narrow the scope of variables in the lexer
  kconfig: Create links to main menu items in search
  ...
Merge branch 'akpm' (patches from Andrew) 2021-11-06T21:08:17+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-06T21:08:17+00:00 512b7931ad0561ffe14265f9ff554a3c081b476b Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ... 
Merge misc updates from Andrew Morton:
 "257 patches.

  Subsystems affected by this patch series: scripts, ocfs2, vfs, and
  mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
  gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
  pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
  memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
  vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
  cleanups, kfence, and damon)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
  mm/damon: remove return value from before_terminate callback
  mm/damon: fix a few spelling mistakes in comments and a pr_debug message
  mm/damon: simplify stop mechanism
  Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
  Docs/admin-guide/mm/damon/start: simplify the content
  Docs/admin-guide/mm/damon/start: fix a wrong link
  Docs/admin-guide/mm/damon/start: fix wrong example commands
  mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
  mm/damon: remove unnecessary variable initialization
  Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
  mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
  selftests/damon: support watermarks
  mm/damon/dbgfs: support watermarks
  mm/damon/schemes: activate schemes based on a watermarks mechanism
  tools/selftests/damon: update for regions prioritization of schemes
  mm/damon/dbgfs: support prioritization weights
  mm/damon/vaddr,paddr: support pageout prioritization
  mm/damon/schemes: prioritize regions within the quotas
  mm/damon/selftests: support schemes quotas
  mm/damon/dbgfs: support quotas of schemes
  ...
memblock: allow to specify flags with memblock_add_node() 2021-11-06T20:30:42+00:00 David Hildenbrand david@redhat.com 2021-11-05T20:44:49+00:00 952eea9b01e4bbb7011329f1b7240844e61e5128 We want to specify flags when hotplugging memory. Let's prepare to pass flags to memblock_add_node() by adjusting all existing users. Note that when hotplugging memory the system is already up and running and we might have concurrent memblock users: for example, while we're hotplugging memory, kexec_file code might search for suitable memory regions to place kexec images. It's important to add the memory directly to memblock via a single call with the right flags, instead of adding the memory first and apply flags later: otherwise, concurrent memblock users might temporarily stumble over memblocks with wrong flags, which will be important in a follow-up patch that introduces a new flag to properly handle add_memory_driver_managed(). Link: https://lkml.kernel.org/r/20211004093605.5830-4-david@redhat.com Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Shahab Vahedi <shahab@synopsys.com> [arch/arc] Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jianyong Wu <Jianyong.Wu@arm.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
We want to specify flags when hotplugging memory.  Let's prepare to pass
flags to memblock_add_node() by adjusting all existing users.

Note that when hotplugging memory the system is already up and running
and we might have concurrent memblock users: for example, while we're
hotplugging memory, kexec_file code might search for suitable memory
regions to place kexec images.  It's important to add the memory
directly to memblock via a single call with the right flags, instead of
adding the memory first and apply flags later: otherwise, concurrent
memblock users might temporarily stumble over memblocks with wrong
flags, which will be important in a follow-up patch that introduces a
new flag to properly handle add_memory_driver_managed().

Link: https://lkml.kernel.org/r/20211004093605.5830-4-david@redhat.com
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Shahab Vahedi <shahab@synopsys.com>	[arch/arc]
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jianyong Wu <Jianyong.Wu@arm.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>