linux-toradex.git/arch/microblaze/boot, branch master

kbuild: Mark the gzip recipes as recursive

2026-10-11T00:20:04+00:00

Since commit 48ebe1cbbeb51 ("kbuild: compress the kernel with pigz if
available"), cmd_gzip runs pigz through scripts/jobserver-exec, which
takes the job slots make has free. GNU Make passes the jobserver pipe
only to recipes it treats as recursive, but leaves --jobserver-auth in
MAKEFLAGS for all of them. The make 4.3 in CentOS Stream 9 also hides
the pipe in sub-makes (a backport of the fix for GNU Make bug 58232), so
jobserver-exec cannot open it, runs pigz on one thread, and prints:

  WARNING: Unable to reopen jobserver read-side pipe: FileNotFoundError(2, 'No such file or directory')

Mark every recipe that can run cmd_gzip as recursive with "+", as
commit ecab4115c44cc ("kbuild: mark `rustc` (and others) invocations as
recursive") did for rustc. Besides the $(call if_changed,gzip) rules,
this covers those that choose gzip through a variable: the built-in
initramfs in usr/Makefile (which rcutorture's kvm.sh builds), the EFI
zboot image, and the arm, csky, and mips compressed images. As with
rustc, "make -n" now runs these recipes, including those that choose
through a variable when they select another compressor. Also update the
gzip entry in Documentation/kbuild/makefiles.rst, as suggested in
review.

Tested with GNU Make 4.3 plus CentOS Stream 9's make-4.3-cloexec.patch,
GCC 16.2.0, and -j64, on ARCH=x86_64, arm64, and arm defconfig, and
ARCH=x86_64 defconfig with a built-in initramfs: none of them prints the
warning, and pigz gets the free job slots (-p 54, 64, and 50 for the
kernel image). Without this change, the x86_64 builds print it for the
kernel image and for the initramfs.

Reported-by: Paul E. McKenney 
Closes: https://lore.kernel.org/all/0ddb5e5e-f801-444c-aa98-0cfe814a3026@paulmck-laptop/
Fixes: 48ebe1cbbeb51 ("kbuild: compress the kernel with pigz if available")
Assisted-by: LLM
Reviewed-by: Nicolas Schier 
Acked-by: Lorenzo Stoakes (ARM) 
Signed-off-by: Kees Cook 
Tested-by: Paul E. McKenney 
Link: https://patch.msgid.link/20261010081914.540611-1-kees@kernel.org
Signed-off-by: Nathan Chancellor

kbuild: unify cmd_copy and cmd_shipped

2022-02-14T01:37:32+00:00

cmd_copy and cmd_shipped have similar functionality. The difference is
that cmd_copy uses 'cp' while cmd_shipped 'cat'.

Unify them into cmd_copy because this macro name is more intuitive.

Going forward, cmd_copy will use 'cat' to avoid the permission issue.
I also thought of 'cp --no-preserve=mode' but this option is not
mentioned in the POSIX spec [1], so I am keeping the 'cat' command.

[1]: https://pubs.opengroup.org/onlinepubs/009695299/utilities/cp.html
Signed-off-by: Masahiro Yamada 
Reviewed-by: Nick Desaulniers 
Reviewed-by: Gabriel Krisman Bertazi

microblaze: timer: Remove unused properties

2021-10-26T05:37:18+00:00

This removes properties not used by either the PWM or timer drivers.
This lets us set additionalProperties: false.

Signed-off-by: Sean Anderson 
Acked-by: Michal Simek 
Link: https://lore.kernel.org/r/20211025180605.252476-1-sean.anderson@seco.com
Signed-off-by: Michal Simek

xsysace: Remove SYSACE driver

2021-03-23T16:27:38+00:00

Sysace IP is no longer used on Xilinx PowerPC 405/440 and Microblaze
systems. The driver is not regularly tested and very likely not working for
quite a long time that's why remove it.

Signed-off-by: Michal Simek 
Signed-off-by: Jens Axboe

.gitignore: add SPDX License Identifier

2020-03-25T10:50:48+00:00

Add SPDX License Identifier to all .gitignore files.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Greg Kroah-Hartman

microblaze: Switch to standard restart handler

2019-09-19T08:43:32+00:00

The microblaze uses the legacy APIs to dig out a GPIO pin
defined in the root of the device tree to issue a hard
reset of the platform.

Asserting a hard reset should be done using the standard
DT-enabled and fully GPIO descriptor aware driver in
drivers/power/reset/gpio-restart.c using the bindings
from Documentation/devicetree/bindings/power/reset/gpio-restart.txt

To achieve this, first make sure microblaze makes use of
the standard kernel restart path utilizing do_kernel_restart()
from . Put in some grace time and an
emergency print if the restart does not properly assert.

As this is basic platform functionality we patch the DTS
file and defconfig in one go for a lockstep change.

Cc: Arnd Bergmann 
Cc: Michal Simek 
Signed-off-by: Linus Walleij 
[ Michal: Move machine_restart back to reset.c ]
Signed-off-by: Michal Simek

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman

microblaze: remove the explicit removal of system.dtb

2018-12-14T07:09:21+00:00

I guess

    || (rm -f $@ && echo false)

... should be

    || (rm -f $@ && false)

In fact, no Makefile needs to delete a target explicitly on error.

It is automatically done since commit 9c2af1c7377a ("kbuild: add
.DELETE_ON_ERROR special target").

I also reused equivalent cmd_shipped from scripts/Makefile.lib.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Michal Simek

microblaze: fix multiple bugs in arch/microblaze/boot/Makefile

2018-12-14T07:09:20+00:00

This commit fixes some build issues.

The first issue is the breakage of linux.bin.ub target since commit
ece97f3a5fb5 ("microblaze: Fix simpleImage format generation")
because the addition of UIMAGE_{IN,OUT} affected it.

make ARCH=microblaze CROSS_COMPILE=microblaze-linux- linux.bin.ub
  [ snip ]
  OBJCOPY arch/microblaze/boot/linux.bin
  UIMAGE  arch/microblaze/boot/linux.bin.ub.ub
/usr/bin/mkimage: Can't open arch/microblaze/boot/linux.bin.ub: No such file or directory
make[1]: *** [arch/microblaze/boot/Makefile;14: arch/microblaze/boot/linux.bin.ub] Error 1
make: *** [arch/microblaze/Makefile;83: linux.bin.ub] Error 2

The second issue is the use of the "if_changed" multiple times for
the same target.

As commit 92a4728608a8 ("x86/boot: Fix if_changed build flip/flop bug")
pointed out, this never works properly. Moreover, generating multiple
images as a side-effect is confusing.

Let's split the build recipe for each image.

simpleImage.*.unstrip is just a copy of vmlinux.

simpleImage.
 and simpleImage.
.ub are created in the same way
as linux.bin and linux.bin.ub, respectively.

I kept simpleImage.* recipes independent of linux.bin.* ones to not
change the behavior.

Lastly, this commit fixes "make ARCH=microblaze clean". Previously,
it only cleaned up the unstrip image. Now, all the simpleImage files
are cleaned.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Michal Simek

microblaze: move "... is ready" messages to arch/microblaze/Makefile

2018-12-14T07:09:19+00:00

To prepare for more fixes, move this to arch/microblaze/Makefile.
Otherwise, the same "... is ready" would be printed multiple times.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Michal Simek