Pull SG updates from Jens Axboe:
 "This contains a set of scatter-gather related changes/fixes for 4.3:

   - Add support for limited chaining of sg tables even for
     architectures that do not set ARCH_HAS_SG_CHAIN.  From Christoph.

   - Add sg chain support to target_rd.  From Christoph.

   - Fixup open coded sg->page_link in crypto/omap-sham.  From
     Christoph.

   - Fixup open coded crypto ->page_link manipulation.  From Dan.

   - Also from Dan, automated fixup of manual sg_unmark_end()
     manipulations.

   - Also from Dan, automated fixup of open coded sg_phys()
     implementations.

   - From Robert Jarzmik, addition of an sg table splitting helper that
     drivers can use"

* 'for-4.3/sg' of git://git.kernel.dk/linux-block:
  lib: scatterlist: add sg splitting function
  scatterlist: use sg_phys()
  crypto/omap-sham: remove an open coded access to ->page_link
  scatterlist: remove open coded sg_unmark_end instances
  crypto: replace scatterwalk_sg_chain with sg_chain
  target/rd: always chain S/G list
  scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN

Pull irq updates from Thomas Gleixner:
 "This updated pull request does not contain the last few GIC related
  patches which were reported to cause a regression.  There is a fix
  available, but I let it breed for a couple of days first.

  The irq departement provides:

   - new infrastructure to support non PCI based MSI interrupts
   - a couple of new irq chip drivers
   - the usual pile of fixlets and updates to irq chip drivers
   - preparatory changes for removal of the irq argument from interrupt
     flow handlers
   - preparatory changes to remove IRQF_VALID"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
  irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources
  irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
  irqchip: Add documentation for the bcm2836 interrupt controller
  irqchip/bcm2835: Add support for being used as a second level controller
  irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ
  PCI: xilinx: Fix typo in function name
  irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
  irqchip/gic: Only allow the primary GIC to set the CPU map
  PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove
  unicore32/irq: Prepare puv3_gpio_handler for irq argument removal
  tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal
  m68k/irq: Prepare irq handlers for irq argument removal
  C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal
  blackfin: Prepare irq handlers for irq argument removal
  arc/irq: Prepare idu_cascade_isr for irq argument removal
  sparc/irq: Use access helper irq_data_get_affinity_mask()
  sparc/irq: Use helper irq_data_get_irq_handler_data()
  parisc/irq: Use access helper irq_data_get_affinity_mask()
  mn10300/irq: Use access helper irq_data_get_affinity_mask()
  irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal
  ...

Coccinelle cleanup to replace open coded sg to physical address
translations.  This is in preparation for introducing scatterlists that
reference __pfn_t.

// sg_phys.cocci: convert usage page_to_phys(sg_page(sg)) to sg_phys(sg)
// usage: make coccicheck COCCI=sg_phys.cocci MODE=patch

virtual patch

@@
struct scatterlist *sg;
@@

- page_to_phys(sg_page(sg)) + sg->offset
+ sg_phys(sg)

@@
struct scatterlist *sg;
@@

- page_to_phys(sg_page(sg))
+ sg_phys(sg) & PAGE_MASK

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Migrate microblaze driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in ->set_mode(RESUME or ONESHOT) and so
tick_resume() set_state_oneshot() aren't implemented.

Cc: Michal Simek <monstr@monstr.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

The IRQCHIP_DECLARE macro migrated to 'include/linux/irqchip.h'.

See commit 91e20b5040c67c51aad88cf87db4305c5bd7f79d
("irqchip: Move IRQCHIP_DECLARE macro to include/linux/irqchip.h").

This patch removes the inclusion of private header 'drivers/irqchip/irqchip.h'
and replaces it with the inclusion of 'include/linux/irqchip.h'.

Signed-off-by: Joel Porquet <joel@porquet.org>
Cc: vgupta@synopsys.com
Cc: monstr@monstr.eu
Cc: ralf@linux-mips.org
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/12384045.pHnZrl3CFY@joel-zenbook
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Warnings found by sparse:
arch/microblaze/kernel/dma.c:157:5: warning: symbol
'dma_direct_mmap_coherent' was not declared. Should it be static?
arch/microblaze/kernel/kgdb.c:35:14: warning: symbol 'pvr' was not
declared. Should it be static?

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add missing release version code for v9.4 and v9.5.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge second patchbomb from Andrew Morton:

 - the rest of MM

 - various misc bits

 - add ability to run /sbin/reboot at reboot time

 - printk/vsprintf changes

 - fiddle with seq_printf() return value

* akpm: (114 commits)
  parisc: remove use of seq_printf return value
  lru_cache: remove use of seq_printf return value
  tracing: remove use of seq_printf return value
  cgroup: remove use of seq_printf return value
  proc: remove use of seq_printf return value
  s390: remove use of seq_printf return value
  cris fasttimer: remove use of seq_printf return value
  cris: remove use of seq_printf return value
  openrisc: remove use of seq_printf return value
  ARM: plat-pxa: remove use of seq_printf return value
  nios2: cpuinfo: remove use of seq_printf return value
  microblaze: mb: remove use of seq_printf return value
  ipc: remove use of seq_printf return value
  rtc: remove use of seq_printf return value
  power: wakeup: remove use of seq_printf return value
  x86: mtrr: if: remove use of seq_printf return value
  linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK
  MAINTAINERS: CREDITS: remove Stefano Brivio from B43
  .mailmap: add Ricardo Ribalda
  CREDITS: add Ricardo Ribalda Delgado
  ...

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull exec domain removal from Richard Weinberger:
 "This series removes execution domain support from Linux.

  The idea behind exec domains was to support different ABIs.  The
  feature was never complete nor stable.  Let's rip it out and make the
  kernel signal handling code less complicated"

* 'exec_domain_rip_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (27 commits)
  arm64: Removed unused variable
  sparc: Fix execution domain removal
  Remove rest of exec domains.
  arch: Remove exec_domain from remaining archs
  arc: Remove signal translation and exec_domain
  xtensa: Remove signal translation and exec_domain
  xtensa: Autogenerate offsets in struct thread_info
  x86: Remove signal translation and exec_domain
  unicore32: Remove signal translation and exec_domain
  um: Remove signal translation and exec_domain
  tile: Remove signal translation and exec_domain
  sparc: Remove signal translation and exec_domain
  sh: Remove signal translation and exec_domain
  s390: Remove signal translation and exec_domain
  mn10300: Remove signal translation and exec_domain
  microblaze: Remove signal translation and exec_domain
  m68k: Remove signal translation and exec_domain
  m32r: Remove signal translation and exec_domain
  m32r: Autogenerate offsets in struct thread_info
  frv: Remove signal translation and exec_domain
  ...