linux-toradex.git/arch/microblaze/pci, branch v4.19

microblaze/PCI: Remove stale pcibios_align_resource() comment

2018-08-21T06:23:30+00:00

commit 01cf9d524ff0 ("microblaze/PCI: Support generic Xilinx AXI PCIe Host
Bridge IP driver")

and

commit ecf677c8dcaa ("PCI: Add a generic weak pcibios_align_resource()")

first patched then removed pcibios_align_resource() from the microblaze
architecture code but failed to remove the comment that was added to
it.

Remove it since it has now become stale and it is quite confusing.

Signed-off-by: Lorenzo Pieralisi 
Cc: Palmer Dabbelt 
Cc: Bjorn Helgaas 
Cc: Bharat Kumar Gogada 
Cc: Michal Simek 
Signed-off-by: Michal Simek

microblaze: warn if of_iomap() failed

2018-07-11T08:06:46+00:00

of_iomap() can return NULL. The function is void thus error propagation
is not possible but at least a WARN_ON() seems warranted here as a silent
failure might lead to a hard to understand system state.

Signed-off-by: Nicholas Mc Guire 
Signed-off-by: Michal Simek

Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-06-07T19:45:58+00:00

Pull PCI updates from Bjorn Helgaas:

  - unify AER decoding for native and ACPI CPER sources (Alexandru
    Gagniuc)

  - add TLP header info to AER tracepoint (Thomas Tai)

  - add generic pcie_wait_for_link() interface (Oza Pawandeep)

  - handle AER ERR_FATAL by removing and re-enumerating devices, as
    Downstream Port Containment does (Oza Pawandeep)

  - factor out common code between AER and DPC recovery (Oza Pawandeep)

  - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep)

  - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep)

  - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas)

  - respect platform ownership of LTR (Bjorn Helgaas)

  - clear interrupt status in top half to avoid interrupt storm (Oza
    Pawandeep)

  - neaten pci=earlydump output (Andy Shevchenko)

  - avoid errors when extended config space inaccessible (Gilles Buloz)

  - prevent sysfs disable of device while driver attached (Christoph
    Hellwig)

  - use core interface to report PCIe link properties in bnx2x, bnxt_en,
    cxgb4, ixgbe (Bjorn Helgaas)

  - remove unused pcie_get_minimum_link() (Bjorn Helgaas)

  - fix use-before-set error in ibmphp (Dan Carpenter)

  - fix pciehp timeouts caused by Command Completed errata (Bjorn
    Helgaas)

  - fix refcounting in pnv_php hotplug (Julia Lawall)

  - clear pciehp Presence Detect and Data Link Layer Status Changed on
    resume so we don't miss hotplug events (Mika Westerberg)

  - only request pciehp control if we support it, so platform can use
    ACPI hotplug otherwise (Mika Westerberg)

  - convert SHPC to be builtin only (Mika Westerberg)

  - request SHPC control via _OSC if we support it (Mika Westerberg)

  - simplify SHPC handoff from firmware (Mika Westerberg)

  - fix an SHPC quirk that mistakenly included *all* AMD bridges as well
    as devices from any vendor with device ID 0x7458 (Bjorn Helgaas)

  - assign a bus number even to non-native hotplug bridges to leave
    space for acpiphp additions, to fix a common Thunderbolt xHCI
    hot-add failure (Mika Westerberg)

  - keep acpiphp from scanning native hotplug bridges, to fix common
    Thunderbolt hot-add failures (Mika Westerberg)

  - improve "partially hidden behind bridge" messages from core (Mika
    Westerberg)

  - add macros for PCIe Link Control 2 register (Frederick Lawler)

  - replace IB/hfi1 custom macros with PCI core versions (Frederick
    Lawler)

  - remove dead microblaze and xtensa code (Bjorn Helgaas)

  - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas)

  - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn
    Helgaas)

  - add managed interface to get PCI host bridge resources from OF (Jan
    Kiszka)

  - add support for unbinding generic PCI host controller (Jan Kiszka)

  - fix memory leaks when unbinding generic PCI host controller (Jan
    Kiszka)

  - request legacy VGA framebuffer only for VGA devices to avoid false
    device conflicts (Bjorn Helgaas)

  - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device()
    like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas)

  - add generic enable function for simple SR-IOV hardware (Alexander
    Duyck)

  - use generic SR-IOV enable for ena, nvme (Alexander Duyck)

  - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson)

  - add ACS quirk for Intel 300 series (Mika Westerberg)

  - enable register clock for Armada 7K/8K (Gregory CLEMENT)

  - reduce Keystone "link already up" log level (Fabio Estevam)

  - move private DT functions to drivers/pci/ (Rob Herring)

  - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring)

  - add DesignWare support to the endpoint test driver (Gustavo
    Pimentel)

  - add DesignWare support for endpoint mode (Gustavo Pimentel)

  - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and
    artpec6 (Gustavo Pimentel)

  - fix Qualcomm bitwise NOT issue (Dan Carpenter)

  - add Qualcomm runtime PM support (Srinivas Kandagatla)

  - fix DesignWare enumeration below bridges (Koen Vandeputte)

  - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai)

  - add configfs entries for pci_epf_driver device IDs (Kishon Vijay
    Abraham I)

  - clean up pci_endpoint_test driver (Gustavo Pimentel)

  - update Layerscape maintainer email addresses (Minghuan Lian)

  - add COMPILE_TEST to improve build test coverage (Rob Herring)

  - fix Hyper-V bus registration failure caused by domain/serial number
    confusion (Sridhar Pitchai)

  - improve Hyper-V refcounting and coding style (Stephen Hemminger)

  - avoid potential Hyper-V hang waiting for a response that will never
    come (Dexuan Cui)

  - implement Mediatek chained IRQ handling (Honghui Zhang)

  - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang)

  - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa)

  - add Mobiveil MSI support (Subrahmanya Lingappa)

  - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths
    (Marek Vasut)

  - poll more frequently (5us vs 5ms) while waiting for R-Car data link
    active (Marek Vasut)

  - use generic OF parsing interface in R-Car (Vladimir Zapolskiy)

  - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov)

  - add R-Car gen3 PHY support (Sergei Shtylyov)

  - improve R-Car PHYRDY polling (Sergei Shtylyov)

  - clean up R-Car macros (Marek Vasut)

  - use runtime PM for R-Car controller clock (Dien Pham)

  - update arm64 defconfig for Rockchip (Shawn Lin)

  - refactor Rockchip code to facilitate both root port and endpoint
    mode (Shawn Lin)

  - add Rockchip endpoint mode driver (Shawn Lin)

  - support VMD "membar shadow" feature (Jon Derrick)

  - support VMD bus number offsets (Jon Derrick)

  - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick)

  - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig
    selections (Bjorn Helgaas)

  - clean up quirks.c organization and whitespace (Bjorn Helgaas)

* tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits)
  PCI/AER: Replace struct pcie_device with pci_dev
  PCI/AER: Remove unused parameters
  PCI: qcom: Include gpio/consumer.h
  PCI: Improve "partially hidden behind bridge" log message
  PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc
  PCI: Move resource distribution for single bridge outside loop
  PCI: Account for all bridges on bus when distributing bus numbers
  ACPI / hotplug / PCI: Drop unnecessary parentheses
  ACPI / hotplug / PCI: Mark stale PCI devices disconnected
  ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug
  PCI: hotplug: Add hotplug_is_native()
  PCI: shpchp: Add shpchp_is_native()
  PCI: shpchp: Fix AMD POGO identification
  PCI: mobiveil: Add MSI support
  PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver
  PCI/AER: Decode Error Source Requester ID
  PCI/AER: Remove aer_recover_work_func() forward declaration
  PCI/DPC: Use the generic pcie_do_fatal_recovery() path
  PCI/AER: Pass service type to pcie_do_fatal_recovery()
  PCI/DPC: Disable ERR_NONFATAL handling by DPC
  ...

microblaze/PCI: Remove pcibios_claim_one_bus() dead code

2018-05-22T12:55:35+00:00

pcibios_claim_one_bus() is defined but never used.  Remove it.

Signed-off-by: Bjorn Helgaas

microblaze/PCI: Remove pcibios_finish_adding_to_bus() dead code

2018-05-22T12:55:29+00:00

pcibios_finish_adding_to_bus() is defined but never used.  Remove it.

Signed-off-by: Bjorn Helgaas

microblaze: remove unnecessary prom.h includes

2018-04-23T10:43:44+00:00

In preparation to remove prom.h, remove unnecessary prom.h includes.

Signed-off-by: Rob Herring 
Cc: Michal Simek 
Signed-off-by: Michal Simek

microblaze: Use generic pci_mmap_resource_range()

2018-03-19T14:33:05+00:00

Commit f719582435 ("PCI: Add pci_mmap_resource_range() and use it for
ARM64") added this generic function with the intent of using it
everywhere and ultimately killing the old arch-specific implementations.

Let's get on with that eradication...

Signed-off-by: David Woodhouse 
Signed-off-by: Michal Simek

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-09-08T22:47:43+00:00

Pull PCI updates from Bjorn Helgaas:

 - add enhanced Downstream Port Containment support, which prints more
   details about Root Port Programmed I/O errors (Dongdong Liu)

 - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang)

 - add MediaTek MT2712 and MT7622 support (Ryder Lee)

 - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang)

 - add Qualcom IPQ8074 support (Varadarajan Narayanan)

 - add R-Car r8a7743/5 device tree support (Biju Das)

 - add Rockchip per-lane PHY support for better power management (Shawn
   Lin)

 - fix IRQ mapping for hot-added devices by replacing the
   pci_fixup_irqs() boot-time design with a host bridge hook called at
   probe-time (Lorenzo Pieralisi, Matthew Minter)

 - fix race when enabling two devices that results in upstream bridge
   not being enabled correctly (Srinath Mannam)

 - fix pciehp power fault infinite loop (Keith Busch)

 - fix SHPC bridge MSI hotplug events by enabling bus mastering
   (Aleksandr Bezzubikov)

 - fix a VFIO issue by correcting PCIe capability sizes (Alex
   Williamson)

 - fix an INTD issue on Xilinx and possibly other drivers by unifying
   INTx IRQ domain support (Paul Burton)

 - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg
   Roedel)

 - allow APM X-Gene device assignment to guests by adding an ACS quirk
   (Feng Kan)

 - fix driver crashes by disabling Extended Tags on Broadcom HT2100
   (Extended Tags support is required for PCIe Receivers but not
   Requesters, and we now enable them by default when Requesters support
   them) (Sinan Kaya)

 - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs
   use the real Requester ID (not a phantom RID) (Robin Murphy)

 - prevent assignment of Intel VMD children to guests (which may be
   supported eventually, but isn't yet) by not associating an IOMMU with
   them (Jon Derrick)

 - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott
   Bauer)

 - fix a Function-Level Reset issue with Intel 750 NVMe by waiting
   longer (up to 60sec instead of 1sec) for device to become ready
   (Sinan Kaya)

 - fix a Function-Level Reset issue on iProc Stingray by working around
   hardware defects in the CRS implementation (Oza Pawandeep)

 - fix an issue with Intel NVMe P3700 after an iProc reset by adding a
   delay during shutdown (Oza Pawandeep)

 - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking
   in compose_msi_msg() (Stephen Hemminger)

 - fix a wireless LAN driver timeout by clearing DesignWare MSI
   interrupt status after it is handled, not before (Faiz Abbas)

 - fix DesignWare ATU enable checking (Jisheng Zhang)

 - reduce Layerscape dependencies on the bootloader by doing more
   initialization in the driver (Hou Zhiqiang)

 - improve Intel VMD performance allowing allocation of more IRQ vectors
   than present CPUs (Keith Busch)

 - improve endpoint framework support for initial DMA mask, different
   BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon
   Vijay Abraham I, Stan Drozd)

 - rework CRS support to add periodic messages while we poll during
   enumeration and after Function-Level Reset and prepare for possible
   other uses of CRS (Sinan Kaya)

 - clean up Root Port AER handling by removing unnecessary code and
   moving error handler methods to struct pcie_port_service_driver
   (Christoph Hellwig)

 - clean up error handling paths in various drivers (Bjorn Andersson,
   Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen,
   Lorenzo Pieralisi, Sergei Shtylyov)

 - clean up SR-IOV resource handling by disabling VF decoding before
   updating the corresponding resource structs (Gavin Shan)

 - clean up DesignWare-based drivers by unifying quirks to update Class
   Code and Interrupt Pin and related handling of write-protected
   registers (Hou Zhiqiang)

 - clean up by adding empty generic pcibios_align_resource() and
   pcibios_fixup_bus() and removing empty arch-specific implementations
   (Palmer Dabbelt)

 - request exclusive reset control for several drivers to allow cleanup
   elsewhere (Philipp Zabel)

 - constify various structures (Arvind Yadav, Bhumika Goyal)

 - convert from full_name() to %pOF (Rob Herring)

 - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn
   Lin)

* tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits)
  PCI: xgene: Clean up whitespace
  PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset
  PCI: xgene: Fix platform_get_irq() error handling
  PCI: xilinx-nwl: Fix platform_get_irq() error handling
  PCI: rockchip: Fix platform_get_irq() error handling
  PCI: altera: Fix platform_get_irq() error handling
  PCI: spear13xx: Fix platform_get_irq() error handling
  PCI: artpec6: Fix platform_get_irq() error handling
  PCI: armada8k: Fix platform_get_irq() error handling
  PCI: dra7xx: Fix platform_get_irq() error handling
  PCI: exynos: Fix platform_get_irq() error handling
  PCI: iproc: Clean up whitespace
  PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP
  PCI: iproc: Add 500ms delay during device shutdown
  PCI: Fix typos and whitespace errors
  PCI: Remove unused "res" variable from pci_resource_io()
  PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()
  PCI/AER: Reformat AER register definitions
  iommu/vt-d: Prevent VMD child devices from being remapping targets
  x86/PCI: Use is_vmd() rather than relying on the domain number
  ...

microblaze: Convert to using %pOF instead of full_name

2017-08-29T13:49:15+00:00

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring 
Cc: Michal Simek