linux-toradex.git/arch/mips/alchemy/devboards, branch v4.2.7

MIPS: Alchemy: DB1300: Add touch penirq support

2014-09-22T11:35:47+00:00

wire up the WM9713 pendown irq support.

Signed-off-by: Manuel Lauss 
Cc: Linux-MIPS 
Patchwork: https://patchwork.linux-mips.org/patch/7563/
Signed-off-by: Ralf Baechle

MIPS: Alchemy: DB1xxx: Explicitly set 50MHz clock for I2C/SPI units.

2014-09-22T11:35:47+00:00

Add an explicit call to set the desired rate to get the correct
clock routing for the PSC clocks.  It wasn't broken before, but
now it's less affected by bootloader changes.

Signed-off-by: Manuel Lauss 
Cc: Linux-MIPS 
Patchwork: https://patchwork.linux-mips.org/patch/7554/
Signed-off-by: Ralf Baechle

MIPS: Alchemy: devboards: sit and spin after poweroff

2014-09-22T11:35:46+00:00

On boards which don't support poweroff, systemd complains about this fact.
In case poweroff fails, just sit and spin in the wait loop.

Signed-off-by: Manuel Lauss 
Cc: Linux-MIPS 
Cc: Manuel Lauss 
Patchwork: https://patchwork.linux-mips.org/patch/7558/
Signed-off-by: Ralf Baechle

MIPS: Alchemy: Fix db1200 PSC clock enablement

2014-08-19T11:30:47+00:00

Enable PSC0 (I2C/SPI) clock and leave PSC1 (Audio) alone.  This patch
restores functionality to both Audio and I2C/SPI.

Signed-off-by: Manuel Lauss 
Cc: Linux-MIPS 
Patchwork: https://patchwork.linux-mips.org/patch/7544/
Signed-off-by: Ralf Baechle

MIPS: Alchemy: au1100fb: use clk framework

2014-07-30T12:10:39+00:00

Use the clock framework to en/disable the clock to the au1100
framebuffer device.

Signed-off-by: Manuel Lauss 
Cc: Linux-MIPS 
Patchwork: https://patchwork.linux-mips.org/patch/7474/
Signed-off-by: Ralf Baechle

MIPS: Alchemy: db1x00: use clk framework

2014-07-30T12:10:00+00:00

Make use of the clk framework to set up and enable all PSC clocks.

Signed-off-by: Manuel Lauss 
Cc: Linux-MIPS 
Patchwork: https://patchwork.linux-mips.org/patch/7469/
Signed-off-by: Ralf Baechle

MIPS: Alchemy: add helpers to access static memory ctrl registers.

2014-07-30T11:53:52+00:00

This patch changes the static memory controller registers to offsets
from base, prefixes them with AU1000_ to avoid silent failures due to
changed addresses and introduces helpers to access them.

No functional changes, comparing assembly of a few select functions shows
no differences.

Signed-off-by: Manuel Lauss 
Cc: Linux-MIPS 
Patchwork: https://patchwork.linux-mips.org/patch/7463/
Signed-off-by: Ralf Baechle

MIPS: Alchemy: introduce helpers to access SYS register block.

2014-07-30T11:53:28+00:00

This patch changes all absolute SYS_XY registers to offsets from the
SYS block base, prefixes them with AU1000 to avoid silent failures due
to changed addresses, and introduces helper functions to read/write
them.

No functional changes, comparing assembly of a few select functions shows
no differences.

Signed-off-by: Manuel Lauss 
Cc: Linux-MIPS 
Patchwork: https://patchwork.linux-mips.org/patch/7464/
Signed-off-by: Ralf Baechle

MIPS: Replace obsolete strict_strto call with kstrto

2014-06-04T20:50:40+00:00

Signed-off-by: Daniel Walter 
Cc: linux-kernel@vger.kernel.org
Cc: richard@nod.at
Cc: akpm@linux-foundation.org
Signed-off-by: Ralf Baechle

MIPS: Alchemy: pata_platform for DB1200

2014-03-26T22:09:21+00:00

The au1xxx-ide driver isn't any faster than pata_platform since it
spends a lot of time busy waiting for DMA to finish; faster PIO/DMA
modes only work on the db1200 with a certain cpu speed, UDMA is broken,
and finally the old IDE layer is on death row, so time to switch to
the newer ATA layer.

Signed-off-by: Manuel Lauss 
Cc: Linux-MIPS 
Patchwork: https://patchwork.linux-mips.org/patch/6662/
Signed-off-by: Ralf Baechle