linux-toradex.git/arch/mips/boot/dts, branch v4.2.7

MIPS: Malta: Basic DT plumbing

2015-06-21T19:54:29+00:00

Build a DT for the Malta platform into the kernel, load it & probe
devices from it. The DT is essentially empty at this point, devices
will be added in further patches.

[ralf@linux-mips.org: Fixed conflicts.]

Signed-off-by: Paul Burton 
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: Rob Herring 
Cc: Pawel Moll 
Cc: Mark Rutland 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: Andrew Bresticker 
Cc: linux-kernel@vger.kernel.org
Cc: Markos Chandras 
Patchwork: http://patchwork.linux-mips.org/patch/10119/
Signed-off-by: Ralf Baechle

MIPS: BMIPS: Build all dtbs if no builtin dtb

2015-06-21T19:54:16+00:00

Build all available dtbs to allow them to be appended to the resulting
kernel in case there is no builtin dtb.

Signed-off-by: Jonas Gorski 
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: John Crispin 
Cc: Kevin Cernekee 
Cc: Florian Fainelli 
Cc: Aaro Koskinen 
Cc: Markos Chandras 
Cc: Andrew Bresticker 
Cc: Daniel Schwierzeck 
Cc: Paul Burton 
Cc: James Hartley 
Patchwork: https://patchwork.linux-mips.org/patch/9740/
Signed-off-by: Ralf Baechle

MIPS: Add basic support for the TL-WR1043ND version 1

2015-06-21T19:54:10+00:00

Add a DTS for TL-WR1043ND version 1 and allow to have it built in the
kernel to circumvent the broken u-boot found on these boards.
Currently only the UART, LEDs and buttons are supported.

Signed-off-by: Alban Bedel 
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle

MIPS: BMIPS: dts: Add uart device nodes to bcm7xxx platforms

2015-06-21T19:53:35+00:00

Add two uart device nodes known as the uart1 and uart2 for the bcm7xxx
platforms.

Signed-off-by: Jaedon Shin 
Cc: Kevin Cernekee 
Cc: Florian Fainelli 
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9991/
Signed-off-by: Ralf Baechle

MIPS: BMIPS: Add support for Broadcom BCM97435SVMB

2015-06-21T19:53:34+00:00

Add a DTS file and Kconfig entry for the BCM97435SVMB evaluation board
using bcm7435.dtsi as an example.

The current code needs some tweaking to allow us to use the
dual-threaded dual BMIPS5200 CPUs, so for now we limit ourselves to
allowing just a single CPU to be booted.

Signed-off-by: Florian Fainelli 
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: cernekee@chromium.org
Cc: Steven.Hill@imgtec.com
Patchwork: https://patchwork.linux-mips.org/patch/9972/
Signed-off-by: Ralf Baechle

MIPS: BMIPS: Add BCM7435 dtsi

2015-06-21T19:53:32+00:00

Add the bare minimum required to boot a BCM7435-based system:

- BMIPS5200 CPU nodes
- Level 1 and 2 interrupt controllers
- UARTs
- EHCI/OHCI controllers

Signed-off-by: Florian Fainelli 
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: cernekee@chromium.org
Cc: Steven.Hill@imgtec.com
Patchwork: https://patchwork.linux-mips.org/patch/9971/
Signed-off-by: Ralf Baechle

MIPS: ingenic: Initial MIPS Creator CI20 support

2015-06-21T19:53:28+00:00

Add an initial device tree for the Ingenic JZ4780 based MIPS Creator
CI20 board.

Signed-off-by: Paul Burton 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: Lars-Peter Clausen 
Cc: Mark Rutland 
Cc: Pawel Moll 
Cc: Rob Herring 
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Andrew Bresticker 
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10162/
Signed-off-by: Ralf Baechle

MIPS: ingenic: Initial JZ4780 support

2015-06-21T19:53:26+00:00

Support the Ingenic JZ4780 SoC using the existing code under
arch/mips/jz4740 now that it has been generalised sufficiently.

Signed-off-by: Paul Burton 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: Lars-Peter Clausen 
Cc: Mark Rutland 
Cc: Pawel Moll 
Cc: Rob Herring 
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Joshua Kinard 
Cc: Leonid Yegoshin 
Cc: Deng-Cheng Zhu 
Cc: linux-kernel@vger.kernel.org
Cc: Markos Chandras 
Cc: Andreas Herrmann 
Patchwork: https://patchwork.linux-mips.org/patch/10164/
Signed-off-by: Ralf Baechle

MIPS: JZ4740: use Ingenic SoC UART driver

2015-06-21T19:53:26+00:00

Remove the serial support from arch/mips/jz4740 & make use of the new
Ingenic SoC UART driver. This is done for both regular & early console
output.

Signed-off-by: Paul Burton 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: Lars-Peter Clausen 
Cc: Mark Rutland 
Cc: Pawel Moll 
Cc: Rob Herring 
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Linus Walleij 
Cc: Stephen Warren 
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris 
Cc: Apelete Seketeli 
Cc: Alexandre Courbot 
Patchwork: https://patchwork.linux-mips.org/patch/10160/
Signed-off-by: Ralf Baechle

MIPS,clk: migrate JZ4740 to common clock framework

2015-06-21T19:53:15+00:00

Migrate the JZ4740 & the qi_lb60 board to use common clock framework
via the new Ingenic SoC CGU driver. Note that the JZ4740-specific
debugfs code is removed since common clock framework provides its own
debug capabilities.

Signed-off-by: Paul Burton 
Co-authored-by: Paul Cercueil 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: Lars-Peter Clausen 
Cc: Mark Rutland 
Cc: Mike Turquette 
Cc: Pawel Moll 
Cc: Rob Herring 
Cc: Stephen Boyd 
Cc: devicetree@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Fabian Frederick 
Cc: Deng-Cheng Zhu 
Cc: Linus Walleij 
Cc: Stephen Warren 
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris 
Patchwork: https://patchwork.linux-mips.org/patch/10151/
Signed-off-by: Ralf Baechle