linux-toradex.git/arch/mips/boot, branch v3.19

MIPS: elf2ecoff: Ignore PT_MIPS_ABIFLAGS program headers.

2015-02-04T13:42:12+00:00

These are generated by very recent toolchains and result in an error
message when attenpting to convert a kernel from ELF to ECOFF.

Signed-off-by: Ralf Baechle

MIPS: elf2ecoff: Rewrite main processing loop to switch.

2015-02-04T13:42:06+00:00

The if construct was getting hard to read and would be getting even more
complex with the next bug fix.

Signed-off-by: Ralf Baechle

MIPS: bcm3384: Initial commit of bcm3384 platform support

2014-11-24T06:45:13+00:00

This supports SMP Linux running on the BCM3384 Zephyr (BMIPS5000)
application processor, with fully functional UART and USB 1.1/2.0.
Device Tree is used to configure the following items:

 - All peripherals
 - Early console base address
 - SMP or UP mode
 - MIPS counter frequency
 - Memory size / regions
 - DMA offset
 - Kernel command line

The DT-enabled bootloader and build instructions are posted at
https://github.com/Broadcom/aeolus

Signed-off-by: Kevin Cernekee 
Cc: f.fainelli@gmail.com
Cc: mbizon@freebox.fr
Cc: jogo@openwrt.org
Cc: jfraser@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8170/
Signed-off-by: Ralf Baechle

MIPS: ralink: Move device-trees to arch/mips/boot/dts/

2014-09-22T11:35:50+00:00

Move the Ralink device-trees to arch/mips/boot/dts/ and update the
Makefiles accordingly.  A built-in device-tree is optional, so select
BUILTIN_DTB when it is requested.

Signed-off-by: Andrew Bresticker 
Cc: Rob Herring 
Cc: Pawel Moll 
Cc: Mark Rutland 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: James Hogan 
Cc: Paul Burton 
Cc: David Daney 
Cc: John Crispin 
Cc: Jayachandran C 
Cc: Qais Yousef 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7561/
Signed-off-by: Ralf Baechle

MIPS: Netlogic: Move device-trees to arch/mips/boot/dts/

2014-09-22T11:35:50+00:00

Move the Netlogic XLP device-trees to arch/mips/boot/dts/ and update the
Makefiles accordingly.  A built-in device-tree is optional, so select
BUILTIN_DTB when it is requested.

Signed-off-by: Andrew Bresticker 
Cc: Rob Herring 
Cc: Pawel Moll 
Cc: Mark Rutland 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: James Hogan 
Cc: Paul Burton 
Cc: David Daney 
Cc: John Crispin 
Cc: Jayachandran C 
Cc: Qais Yousef 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7560/
Signed-off-by: Ralf Baechle

MIPS: sead3: Move device-trees to arch/mips/boot/dts/

2014-09-22T11:35:50+00:00

Move the SEAD-3 device-tree to arch/mips/boot/dts/ and update the
Makefiles accordingly.  Since SEAD-3 requires the device-tree to be
built into the kernel, select BUILTIN_DTB when building for SEAD-3.

Signed-off-by: Andrew Bresticker 
Cc: Rob Herring 
Cc: Pawel Moll 
Cc: Mark Rutland 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: James Hogan 
Cc: Paul Burton 
Cc: David Daney 
Cc: John Crispin 
Cc: Jayachandran C 
Cc: Qais Yousef 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7555/
Signed-off-by: Ralf Baechle

MIPS: Lantiq: Move device-trees to arch/mips/boot/dts/

2014-09-22T11:35:49+00:00

Move the Lantiq device-trees to arch/mips/boot/dts/ and update the
Makefiles accordingly.  There is currently only a single Lantiq
device-tree (EASY50712), and it's required to be built into the kernel,
so select BUILTIN_DTB for it.

Signed-off-by: Andrew Bresticker 
Cc: Rob Herring 
Cc: Pawel Moll 
Cc: Mark Rutland 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: James Hogan 
Cc: Paul Burton 
Cc: David Daney 
Cc: John Crispin 
Cc: Jayachandran C 
Cc: Qais Yousef 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7559/
Signed-off-by: Ralf Baechle

MIPS: Octeon: Move device-trees to arch/mips/boot/dts/

2014-09-22T11:35:49+00:00

Move the Octeon device-trees to arch/mips/boot/dts/ and update the
Makefiles accordingly.  Since Octeon requires the device-tree to be
built into the kernel, select BUILTIN_DTB as well.

Signed-off-by: Andrew Bresticker 
Cc: Rob Herring 
Cc: Pawel Moll 
Cc: Mark Rutland 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: James Hogan 
Cc: Paul Burton 
Cc: David Daney 
Cc: John Crispin 
Cc: Jayachandran C 
Cc: Qais Yousef 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7556/
Signed-off-by: Ralf Baechle

MIPS: Add support for building device-tree binaries

2014-09-22T11:35:49+00:00

Add a 'dtbs' Makefile target that just builds the device-tree binaries
enabled by the configuration.

Signed-off-by: Andrew Bresticker 
Cc: Rob Herring 
Cc: Pawel Moll 
Cc: Mark Rutland 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: James Hogan 
Cc: Paul Burton 
Cc: David Daney 
Cc: John Crispin 
Cc: Jayachandran C 
Cc: Qais Yousef 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7557/
Signed-off-by: Ralf Baechle

MIPS: Create common infrastructure for building built-in device-trees

2014-09-22T11:35:49+00:00

In preparation for moving the device-trees to a common location,
introduce the config option BUILTIN_DTB, which can be selected by
platforms that use a device-tree built into the kernel image, and
create a Makefile to build the device-trees in arch/mips/boot/dts/.

Signed-off-by: Andrew Bresticker 
Cc: Rob Herring 
Cc: Pawel Moll 
Cc: Mark Rutland 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: James Hogan 
Cc: Paul Burton 
Cc: David Daney 
Cc: John Crispin 
Cc: Jayachandran C 
Cc: Qais Yousef 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7564/
Signed-off-by: Ralf Baechle