After commit 87fcfa7b7fe6 ("MIPS: Loongson64: Add generic dts"),
there already exists the node and property of Loongson CPU UART0
in loongson3-package.dtsi:
cpu_uart0: serial@1fe001e0 {
compatible = "ns16550a";
reg = <0 0x1fe001e0 0x8>;
clock-frequency = <33000000>;
interrupt-parent = <&liointc>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
no-loopback-test;
};
In order to support for serial console on the Loongson platform,
add CONFIG_SERIAL_OF_PLATFORM=y to loongson3_defconfig.
With this patch, we can see the following boot messages:
[ 1.877745] printk: console [ttyS0] disabled
[ 1.881979] 1fe001e0.serial: ttyS0 at MMIO 0x1fe001e0 (irq = 16, base_baud = 2062500) is a 16550A
[ 1.890838] printk: console [ttyS0] enabled
And also, we can login normally from the serial console.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When ATI Radeon GPU driver has been compiled directly into the kernel
instead of as a module, we should make sure the firmware for the model
(check available ones in /lib/firmware/radeon) is built-in to the kernel
as well, otherwise there exists the following fatal error during GPU init,
change CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m to fix it.
[ 1.900997] [drm] Loading RS780 Microcode
[ 1.905077] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_pfp.bin failed with error -2
[ 1.914140] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[ 1.920405] [drm:r600_init] *ERROR* Failed to load firmware!
[ 1.926069] radeon 0000:01:05.0: Fatal error during GPU init
[ 1.931729] [drm] radeon: finishing device.
Fixes: 024e6a8b5bb1 ("MIPS: Loongson: Add a Loongson-3 default config file")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All LASAT has probably gone bad, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Drop CONFIG_MTD_M25P80 that was removed in
commit b35b9a10362d ("mtd: spi-nor: Move m25p80 code in spi-nor.c")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Enable support for the new hardware that was added in the devicetree. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The OST driver provides a clocksource and sched_clock that are much more accurate than the default ones. The PWM driver allows to use the PWM pins on the external header of the board. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In order to use perf tool on the Loongson platform, we should enable kernel support for various performance events provided by software and hardware, so add CONFIG_PERF_EVENTS=y to loongson3_defconfig. E.g. without this patch: [loongson@localhost perf]$ ./perf list List of pre-defined events (to be used in -e): duration_time [Tool event] rNNN [Raw hardware event descriptor] cpu/t1=v1[,t2=v2,t3 ...]/modifier [Raw hardware event descriptor] (see 'man perf-list' on how to encode it) mem:<addr>[/len][:access] [Hardware breakpoint] With this patch: [loongson@localhost perf]$ ./perf list List of pre-defined events (to be used in -e): branch-instructions OR branches [Hardware event] branch-misses [Hardware event] cpu-cycles OR cycles [Hardware event] instructions [Hardware event] alignment-faults [Software event] bpf-output [Software event] context-switches OR cs [Software event] cpu-clock [Software event] cpu-migrations OR migrations [Software event] dummy [Software event] emulation-faults [Software event] major-faults [Software event] minor-faults [Software event] page-faults OR faults [Software event] task-clock [Software event] duration_time [Tool event] L1-dcache-load-misses [Hardware cache event] L1-dcache-store-misses [Hardware cache event] L1-icache-load-misses [Hardware cache event] branch-load-misses [Hardware cache event] branch-loads [Hardware cache event] dTLB-load-misses [Hardware cache event] dTLB-store-misses [Hardware cache event] iTLB-load-misses [Hardware cache event] rNNN [Raw hardware event descriptor] cpu/t1=v1[,t2=v2,t3 ...]/modifier [Raw hardware event descriptor] (see 'man perf-list' on how to encode it) mem:<addr>[/len][:access] [Hardware breakpoint] Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ...