linux-toradex.git/arch/mips/include/asm/compat.h, branch v3.9.2

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2013-03-02T15:44:16+00:00

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

mips: switch to generic sigaltstack

2013-02-03T23:32:24+00:00

Signed-off-by: Al Viro

MIPS: Whitespace cleanup.

2013-02-01T09:00:22+00:00

Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.

Signed-off-by: Ralf Baechle

MIPS: compat: Implement is_compat_task() by testing for 32-bit address space.

2012-11-09T09:58:29+00:00

So far is_compat_task() was testing for 32-bit registers if O32 support
was enabled and if O32 support was disabled but N32 enabled it was testing
for 32-bit address space.  So if both O32 and N32 were enabled a N32
task was not considered a compat task, whops.

This still leaves potential cases where O32 and N32 need different treatment
unsolved.  But that's another commit.

Signed-off-by: Ralf Baechle

compat: move compat_siginfo_t definition to asm/compat.h

2012-10-05T18:05:16+00:00

This is a preparatory patch for the introduction of NT_SIGINFO elf note.

Make the location of compat_siginfo_t uniform across eight architectures
which have it.  Now it can be pulled in by including asm/compat.h or
linux/compat.h.

Most of the copies are verbatim.  compat_uid[32]_t had to be replaced by
__compat_uid[32]_t.  compat_uptr_t had to be moved up before
compat_siginfo_t in asm/compat.h on a several architectures (tile already
had it moved up).  compat_sigval_t had to be relocated from linux/compat.h
to asm/compat.h.

Signed-off-by: Denys Vlasenko 
Cc: Oleg Nesterov 
Cc: Amerigo Wang 
Cc: "Jonathan M. Foote" 
Cc: Roland McGrath 
Cc: Pedro Alves 
Cc: Fengguang Wu 
Cc: Stephen Rothwell 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

compat: sync compat_stats with statfs.

2011-10-28T12:58:53+00:00

This was found by inspection while tracking a similar
bug in compat_statfs64, that has been fixed in mainline
since decemeber.

- This fixes a bug where not all of the f_spare fields
  were cleared on mips and s390.
- Add the f_flags field to struct compat_statfs
- Copy f_flags to userspace in case someone cares.
- Use __clear_user to copy the f_spare field to userspace
  to ensure that all of the elements of f_spare are cleared.
  On some architectures f_spare is has 5 ints and on some
  architectures f_spare only has 4 ints.  Which makes
  the previous technique of clearing each int individually
  broken.

I don't expect anyone actually uses the old statfs system
call anymore but if they do let them benefit from having
the compat and the native version working the same.

Signed-off-by: Eric W. Biederman 
Signed-off-by: Christoph Hellwig

compat: Make compat_alloc_user_space() incorporate the access_ok()

2010-09-14T23:08:45+00:00

compat_alloc_user_space() expects the caller to independently call
access_ok() to verify the returned area.  A missing call could
introduce problems on some architectures.

This patch incorporates the access_ok() check into
compat_alloc_user_space() and also adds a sanity check on the length.
The existing compat_alloc_user_space() implementations are renamed
arch_compat_alloc_user_space() and are used as part of the
implementation of the new global function.

This patch assumes NULL will cause __get_user()/__put_user() to either
fail or access userspace on all architectures.  This should be
followed by checking the return value of compat_access_user_space()
for NULL in the callers, at which time the access_ok() in the callers
can also be removed.

Reported-by: Ben Hawkes 
Signed-off-by: H. Peter Anvin 
Acked-by: Benjamin Herrenschmidt 
Acked-by: Chris Metcalf 
Acked-by: David S. Miller 
Acked-by: Ingo Molnar 
Acked-by: Thomas Gleixner 
Acked-by: Tony Luck 
Cc: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Fenghua Yu 
Cc: H. Peter Anvin 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: James Bottomley 
Cc: Kyle McMartin 
Cc: Martin Schwidefsky 
Cc: Paul Mackerras 
Cc: Ralf Baechle 
Cc:

improve sys_newuname() for compat architectures

2010-03-12T23:52:32+00:00

On an architecture that supports 32-bit compat we need to override the
reported machine in uname with the 32-bit value.  Instead of doing this
separately in every architecture introduce a COMPAT_UTS_MACHINE define in
 and apply it directly in sys_newuname().

Signed-off-by: Christoph Hellwig 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mundt 
Cc: Jeff Dike 
Cc: Hirokazu Takata 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: H. Peter Anvin 
Cc: Al Viro 
Cc: Arnd Bergmann 
Cc: Heiko Carstens 
Cc: Martin Schwidefsky 
Cc: "Luck, Tony" 
Cc: James Morris 
Cc: Andreas Schwab 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

MIPS: Do not include seccomp.h from compat.h

2009-05-14T12:50:26+00:00

The compat.h does not need seccomp.h since TIF_32BIT was moved to
thread_info.h

This fixes a build error of 64-bit kernel without CONFIG_SECCOMP.

Signed-off-by: Atsushi Nemoto 
Acked-by: : David Daney 
Signed-off-by: Ralf Baechle

MIPS: compat: Implement is_compat_task.

2009-03-08T16:59:39+00:00

This is a build fix required after "x86-64: seccomp: fix 32/64 syscall
hole" (commit 5b1017404aea6d2e552e991b3fd814d839e9cd67).  MIPS doesn't
have the issue that was fixed for x86-64 by that patch.

This also doesn't solve the N32 issue which is that N32 seccomp processes
will be treated as non-compat processes thus only have access to N64
syscalls.

Signed-off-by: Ralf Baechle 
Signed-off-by: Linus Torvalds