linux-toradex.git/arch/mips/include/asm/mach-ath79, branch v4.2-rc8 Linux kernel for Apalis and Colibri modules Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus 2015-06-27T19:44:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-06-27T19:44:34+00:00 78c10e556ed904d5bfbd71e9cadd8ce8f25d6982 Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ... 
Pull MIPS updates from Ralf Baechle:

 - Improvements to the tlb_dump code
 - KVM fixes
 - Add support for appended DTB
 - Minor improvements to the R12000 support
 - Minor improvements to the R12000 support
 - Various platform improvments for BCM47xx
 - The usual pile of minor cleanups
 - A number of BPF fixes and improvments
 - Some improvments to the support for R3000 and DECstations
 - Some improvments to the ATH79 platform support
 - A major patchset for the JZ4740 SOC adding support for the CI20 platform
 - Add support for the Pistachio SOC
 - Minor BMIPS/BCM63xx platform support improvments.
 - Avoid "SYNC 0" as memory barrier when unlocking spinlocks
 - Add support for the XWR-1750 board.
 - Paul's __cpuinit/__cpuinitdata cleanups.
 - New Malta CPU board support large memory so enable ZONE_DMA32.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits)
  MIPS: spinlock: Adjust arch_spin_lock back-off time
  MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA
  MIPS: BCM47xx: Simplify handling SPROM revisions
  MIPS: Cobalt Don't use module_init in non-modular MTD registration.
  MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/
  MIPS: use for_each_sg()
  MIPS: BCM47xx: Don't select BCMA_HOST_PCI
  MIPS: BCM47xx: Add helper variable for storing NVRAM length
  MIPS: IRQ/IP27: Move IRQ allocation API to platform code.
  MIPS: Replace smp_mb with release barrier function in unlocks.
  MIPS: i8259: DT support
  MIPS: Malta: Basic DT plumbing
  MIPS: include errno.h for ENODEV in mips-cm.h
  MIPS: Define GCR_GIC_STATUS register fields
  MIPS: BPF: Introduce BPF ASM helpers
  MIPS: BPF: Use BPF register names to describe the ABI
  MIPS: BPF: Move register definition to the BPF header
  MIPS: net: BPF: Replace RSIZE with SZREG
  MIPS: BPF: Free up some callee-saved registers
  MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers
  ...
MIPS: ath79: Improve the DDR controller interface 2015-06-21T19:53:51+00:00 Alban Bedel albeu@free.fr 2015-04-19T12:30:03+00:00 24b0e3e84fbf460ea904f4eb85e414e6001c8f37 The DDR controller need to be used by the IRQ controller to flush the write buffer of some devices before running the IRQ handler. It is also used by the PCI controller to setup the PCI memory windows. The current interface used to access the DDR controller doesn't provides any useful abstraction and simply rely on a shared global pointer. Replace this by a simple API to setup the PCI memory windows and use the write buffer flush independently of the SoC type. That remove the need for the shared global pointer, simplify the IRQ handler code. [ralf@linux-mips.org: Folded in Alban Bedel's follup fix.] Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9773/ Patchwork: http://patchwork.linux-mips.org/patch/10543/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 
The DDR controller need to be used by the IRQ controller to flush
the write buffer of some devices before running the IRQ handler.
It is also used by the PCI controller to setup the PCI memory windows.

The current interface used to access the DDR controller doesn't
provides any useful abstraction and simply rely on a shared global
pointer.

Replace this by a simple API to setup the PCI memory windows and use
the write buffer flush independently of the SoC type. That remove the
need for the shared global pointer, simplify the IRQ handler code.

[ralf@linux-mips.org: Folded in Alban Bedel's follup fix.]

Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9773/
Patchwork: http://patchwork.linux-mips.org/patch/10543/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS: ath79: Correctly name the defines for the PLL_FB register 2015-06-21T19:53:49+00:00 Alban Bedel albeu@free.fr 2015-04-19T12:30:02+00:00 626a0695a6d98338063c528d113d9ee4ba00cd78 This register is named PLL_FB and is not a divider but a multiplier. To make things less confusing rename the ARxxxx_PLL_DIV_SHIFT and ARxxxx_PLL_DIV_MASK macros to ARxxxx_PLL_FB_SHIFT and ARxxxx_PLL_FB_MASK. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9772/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 
This register is named PLL_FB and is not a divider but a multiplier.
To make things less confusing rename the ARxxxx_PLL_DIV_SHIFT and
ARxxxx_PLL_DIV_MASK macros to ARxxxx_PLL_FB_SHIFT and
ARxxxx_PLL_FB_MASK.

Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9772/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
spi: spi-ath79: Add device tree support 2015-04-27T14:44:56+00:00 Alban Bedel albeu@free.fr 2015-04-24T14:19:22+00:00 85f62476fc44e6915787f832371400cbdd7d8bff Set the OF node of the spi controller and use the generic GPIO based chip select instead of the custom controller data. As the controller data isn't used by any board just drop it. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org> 
Set the OF node of the spi controller and use the generic GPIO based
chip select instead of the custom controller data. As the controller
data isn't used by any board just drop it.

Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
MIPS: Create a common <asm/mach-generic/war.h> 2015-03-31T09:59:40+00:00 Kevin Cernekee cernekee@gmail.com 2015-03-16T21:43:07+00:00 d631fc60706ccd86c5c2b0084bcea0739952ce90 11 platforms require at least one of these workarounds to be enabled; 22 platforms do not. In the latter case we can fall back to a generic version. Note that this also deletes an orphaned reference to RM9000_CDEX_SMP_WAR. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: James Hartley <james.hartley@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/9567/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 
11 platforms require at least one of these workarounds to be enabled; 22
platforms do not.  In the latter case we can fall back to a generic version.

Note that this also deletes an orphaned reference to RM9000_CDEX_SMP_WAR.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/9567/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
mips: delete non-required instances of include <linux/init.h> 2014-01-24T21:39:56+00:00 Paul Gortmaker paul.gortmaker@windriver.com 2014-01-06T19:59:30+00:00 3b2663ca844648c1b511f4dc8b1d5918174da58b None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6320/ 
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6320/
MIPS: ath79: Remove ar933x_uart_platform.h header 2013-10-29T20:23:49+00:00 Gabor Juhos juhosg@openwrt.org 2013-09-17T08:13:29+00:00 1a9db0a9ea11ebf2d83d928f4933f21bf6a808e9 In commit 15ef17f622033455dcf03ae96256e474073a7b11 (tty: ar933x_uart: use the clk API to get the uart clock), the AR933x UART driver for has been converted to get the uart clock rate via the clock API and it does not use the platform data anymore. Remove the ar933x_uart_platform.h header file and get rid of the superfluous variable and initialization code in platform setup. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5832/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 
In commit 15ef17f622033455dcf03ae96256e474073a7b11
(tty: ar933x_uart: use the clk API to get the uart
clock), the AR933x UART driver for has been converted
to get the uart clock rate via the clock API and it
does not use the platform data anymore.

Remove the ar933x_uart_platform.h header file and get
rid of the superfluous variable and initialization code
in platform setup.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5832/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS: ath79: Don't hardwire cpu_has_dsp{2} to 0 2013-09-03T21:22:16+00:00 Gabor Juhos juhosg@openwrt.org 2013-08-22T09:57:14+00:00 70c3c4cd2d8ad44231da50830234d3f5e5170613 The ath79 code supports various SoCs which are using either a 24Kc or a 74Kc core. The 74Kc core has DSP support, so don't hardwire the values to zero. Commit 00dc5ce2a653a332190aa29b2e1f3bceaa7d5b8d (MIPS: ath79: don't hardcode the unavailability of the DSP ASE) has fixed this already, but that change got reverted by 475032564ed96c94c085e3e7a90e07d150a7cec9 (MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required.) Reported-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5750/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 
The ath79 code supports various SoCs which are using either a 24Kc
or a 74Kc core. The 74Kc core has DSP support, so don't hardwire
the values to zero.

Commit 00dc5ce2a653a332190aa29b2e1f3bceaa7d5b8d (MIPS: ath79: don't
hardcode the unavailability of the DSP ASE) has fixed this already,
but that change got reverted by 475032564ed96c94c085e3e7a90e07d150a7cec9
(MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required.)

Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5750/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Merge branch 'mips-next-3.9' of git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next 2013-02-21T11:51:33+00:00 Ralf Baechle ralf@linux-mips.org 2013-02-21T11:51:33+00:00 8bfc245f9ad7bd4e461179e4e7852ef99b8b6144 






MIPS: ath79: add USB controller registration code for the QCA955X SoCs
2013-02-19T08:36:33+00:00

Gabor Juhos
juhosg@openwrt.org

2013-02-15T13:38:24+00:00

82c46840ae6bd8a147c59cd51f636d913989324a

Register platfom devices for the built-in USB
controllers of the SoCs.

Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com>
Cc: Giori, Kathy <kgiori@qca.qualcomm.com>
Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4952/
Signed-off-by: John Crispin <blogic@openwrt.org>





Register platfom devices for the built-in USB
controllers of the SoCs.

Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com>
Cc: Giori, Kathy <kgiori@qca.qualcomm.com>
Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4952/
Signed-off-by: John Crispin <blogic@openwrt.org>