linux-toradex.git/arch/mips/include/asm, branch v5.16

MIPS: Only define pci_remap_iospace() for Ralink

2021-12-09T09:22:24+00:00

After commit 9f76779f2418 ("MIPS: implement architecture-specific
'pci_remap_iospace()'"), there exists the following warning on the
Loongson64 platform:

    loongson-pci 1a000000.pci:       IO 0x0018020000..0x001803ffff -> 0x0000020000
    loongson-pci 1a000000.pci:      MEM 0x0040000000..0x007fffffff -> 0x0040000000
    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 1 at arch/mips/pci/pci-generic.c:55 pci_remap_iospace+0x84/0x90
    resource start address is not zero
    ...
    Call Trace:
    [] show_stack+0x40/0x120
    [] dump_stack_lvl+0x58/0x74
    [] __warn+0xe0/0x110
    [] warn_slowpath_fmt+0xa4/0xd0
    [] pci_remap_iospace+0x84/0x90
    [] devm_pci_remap_iospace+0x5c/0xb8
    [] devm_of_pci_bridge_init+0x178/0x1f8
    [] devm_pci_alloc_host_bridge+0x78/0x98
    [] loongson_pci_probe+0x34/0x160
    [] platform_probe+0x6c/0xe0
    [] really_probe+0xbc/0x340
    [] __driver_probe_device+0x98/0x110
    [] driver_probe_device+0x50/0x118
    [] __driver_attach+0x80/0x118
    [] bus_for_each_dev+0x80/0xc8
    [] bus_add_driver+0x130/0x210
    [] driver_register+0x8c/0x150
    [] do_one_initcall+0x54/0x288
    [] kernel_init_freeable+0x27c/0x2e4
    [] kernel_init+0x2c/0x134
    [] ret_from_kernel_thread+0x14/0x1c
    ---[ end trace e4a0efe10aa5cce6 ]---
    loongson-pci 1a000000.pci: error -19: failed to map resource [io  0x20000-0x3ffff]

We can see that the resource start address is 0x0000020000, because
the ISA Bridge used the zero address which is defined in the dts file
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:

    ISA Bridge: /bus@10000000/isa@18000000
    IO 0x0000000018000000..0x000000001801ffff  ->  0x0000000000000000

Based on the above analysis, the architecture-specific pci_remap_iospace()
is not suitable for Loongson64, we should only define pci_remap_iospace()
for Ralink on MIPS based on the commit background.

Fixes: 9f76779f2418 ("MIPS: implement architecture-specific 'pci_remap_iospace()'")
Suggested-by: Thomas Bogendoerfer 
Signed-off-by: Tiezhu Yang 
Tested-by: Sergio Paracuellos 
Acked-by: Sergio Paracuellos 
Signed-off-by: Thomas Bogendoerfer

Add linux/cacheflush.h

2021-11-17T15:36:15+00:00

Many architectures do not include asm-generic/cacheflush.h, so turn
the includes on their head and add linux/cacheflush.h which includes
asm/cacheflush.h.

Move the flush_dcache_folio() declaration from asm-generic/cacheflush.h
to linux/cacheflush.h and change linux/highmem.h to include
linux/cacheflush.h instead of asm/cacheflush.h so that all necessary
places will see flush_dcache_folio().

More functions should have their default implementations moved in the
future, but those are for follow-on patches.  This fixes csky, sparc and
sparc64 which were missed in the commit which added flush_dcache_folio().

Fixes: 08b0b0059bf1 ("mm: Add flush_dcache_folio()")
Suggested-by: Christoph Hellwig 
Signed-off-by: Matthew Wilcox (Oracle) 
Acked-by: Geert Uytterhoeven

Merge tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2021-11-13T17:11:33+00:00

Pull more MIPS updates from Thomas Bogendoerfer:

 - Config updates for BMIPS platform

 - Build fixes

 - Makefile cleanups

* tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: decompressor: do not copy source files while building
  MIPS: boot/compressed/: add __bswapdi2() to target for ZSTD decompression
  MIPS: fix duplicated slashes for Platform file path
  MIPS: fix *-pkg builds for loongson2ef platform
  PCI: brcmstb: Allow building for BMIPS_GENERIC
  MIPS: BMIPS: Enable PCI Kconfig
  MIPS: VDSO: remove -nostdlib compiler flag
  mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
  MIPS: Update bmips_stb_defconfig
  MIPS: Allow modules to set board_be_handler

MIPS: Allow modules to set board_be_handler

2021-11-09T15:07:26+00:00

After making the brcmstb_gisb driver modular with 707a4cdf86e5 ("bus:
brcmstb_gisb: Allow building as module") Guenter reported that mips
allmodconfig failed to link because board_be_handler was referenced.

Thomas indicated that if we were to continue making the brcmstb_gisb
driver modular for MIPS we would need to introduce a function that
allows setting the board_be_handler and export that function towards
modules.

This is what is being done here: board_be_handler is made static and is
now settable with a mips_set_be_handler() function which is exported.

Reported-by: Guenter Roeck 
Suggested-by: Thomas Bogendoerfer 
Fixes: 707a4cdf86e5 ("bus: brcmstb_gisb: Allow building as module")
Signed-off-by: Florian Fainelli 
Tested-by: Guenter Roeck 
Signed-off-by: Thomas Bogendoerfer

Merge tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2021-11-05T15:13:19+00:00

Pull MIPS updates from Thomas Bogendoerfer:

 - added printing of CPU options for /proc/cpuinfo

 - removed support for Netlogic SOCs

 - fixes and cleanup

* tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Cobalt: Explain GT64111 early PCI fixup
  mips: fix HUGETLB function without THP enabled
  mips: cm: Convert to bitfield API to fix out-of-bounds access
  MIPS: Remove NETLOGIC support
  MIPS: kernel: proc: add CPU option reporting
  MIPS: kernel: proc: use seq_puts instead of seq_printf
  MIPS: kernel: proc: fix trivial style errors
  MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVEL
  MIPS: octeon: Remove unused functions
  MIPS: Loongson64: Add of_node_put() before break
  bcm47xx: Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert()
  bcm47xx: Get rid of redundant 'else'
  MIPS: sni: Fix the build
  MIPS: Avoid macro redefinitions
  MIPS: loongson64: Fix no screen display during boot-up
  MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT

Merge tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2021-11-04T14:56:22+00:00

Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver updates and cleanups for
  5.16-rc1.

  Overall we ended up removing a lot of code this time, a bit over
  20,000 lines are now gone thanks to a lot of cleanup work by many
  developers.

  Nothing huge in here functionality wise, just loads of cleanups:

   - r8188eu driver major cleanups and removal of unused and dead code

   - wlan-ng minor cleanups

   - fbtft driver cleanups

   - most driver cleanups

   - rtl8* drivers cleanups

   - rts5208 driver cleanups

   - vt6655 driver cleanups

   - vc04_services drivers cleanups

   - wfx cleanups on the way to almost getting this merged out of
     staging (it's close!)

   - tiny mips changes needed for the mt7621 drivers, they have been
     acked by the respective subsystem maintainers to go through this
     tree.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (622 commits)
  staging: r8188eu: hal: remove goto statement and local variable
  staging: rtl8723bs: hal remove the assignment to itself
  staging: rtl8723bs: fix unmet dependency on CRYPTO for CRYPTO_LIB_ARC4
  staging: vchiq_core: get rid of typedef
  staging: fieldbus: anybus: reframe comment to avoid warning
  staging: r8188eu: fix missing unlock in rtw_resume()
  staging: r8188eu: core: remove the goto from rtw_IOL_accquire_xmit_frame
  staging: r8188eu: core: remove goto statement
  staging: vt6655: Rename `dwAL7230InitTable` array
  staging: vt6655: Rename `dwAL2230PowerTable` array
  staging: vt6655: Rename `dwAL7230InitTableAMode` array
  staging: vt6655: Rename `dwAL7230ChannelTable2` array
  staging: vt6655: Rename `dwAL7230ChannelTable1` array
  staging: vt6655: Rename `dwAL7230ChannelTable0` array
  staging: vt6655: Rename `dwAL2230ChannelTable1` array
  staging: vt6655: Rename `dwAL2230ChannelTable0` array
  staging: r8712u: fix control-message timeout
  staging: rtl8192u: fix control-message timeouts
  staging: mt7621-dts: add missing SPDX license to files
  staging: vchiq_core: fix quoted strings split across lines
  ...

Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2021-11-02T13:20:58+00:00

Pull networking updates from Jakub Kicinski:
 "Core:

   - Remove socket skb caches

   - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
     avoid memory accounting overhead on each message sent

   - Introduce managed neighbor entries - added by control plane and
     resolved by the kernel for use in acceleration paths (BPF / XDP
     right now, HW offload users will benefit as well)

   - Make neighbor eviction on link down controllable by userspace to
     work around WiFi networks with bad roaming implementations

   - vrf: Rework interaction with netfilter/conntrack

   - fq_codel: implement L4S style ce_threshold_ect1 marking

   - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()

  BPF:

   - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
     as implemented in LLVM14

   - Introduce bpf_get_branch_snapshot() to capture Last Branch Records

   - Implement variadic trace_printk helper

   - Add a new Bloomfilter map type

   - Track <8-byte scalar spill and refill

   - Access hw timestamp through BPF's __sk_buff

   - Disallow unprivileged BPF by default

   - Document BPF licensing

  Netfilter:

   - Introduce egress hook for looking at raw outgoing packets

   - Allow matching on and modifying inner headers / payload data

   - Add NFT_META_IFTYPE to match on the interface type either from
     ingress or egress

  Protocols:

   - Multi-Path TCP:
      - increase default max additional subflows to 2
      - rework forward memory allocation
      - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS

   - MCTP flow support allowing lower layer drivers to configure msg
     muxing as needed

   - Automatic Multicast Tunneling (AMT) driver based on RFC7450

   - HSR support the redbox supervision frames (IEC-62439-3:2018)

   - Support for the ip6ip6 encapsulation of IOAM

   - Netlink interface for CAN-FD's Transmitter Delay Compensation

   - Support SMC-Rv2 eliminating the current same-subnet restriction, by
     exploiting the UDP encapsulation feature of RoCE adapters

   - TLS: add SM4 GCM/CCM crypto support

   - Bluetooth: initial support for link quality and audio/codec offload

  Driver APIs:

   - Add a batched interface for RX buffer allocation in AF_XDP buffer
     pool

   - ethtool: Add ability to control transceiver modules' power mode

   - phy: Introduce supported interfaces bitmap to express MAC
     capabilities and simplify PHY code

   - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks

  New drivers:

   - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)

   - Ethernet driver for ASIX AX88796C SPI device (x88796c)

  Drivers:

   - Broadcom PHYs
      - support 72165, 7712 16nm PHYs
      - support IDDQ-SR for additional power savings

   - PHY support for QCA8081, QCA9561 PHYs

   - NXP DPAA2: support for IRQ coalescing

   - NXP Ethernet (enetc): support for software TCP segmentation

   - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
     Gigabit-capable IP found on RZ/G2L SoC

   - Intel 100G Ethernet
      - support for eswitch offload of TC/OvS flow API, including
        offload of GRE, VxLAN, Geneve tunneling
      - support application device queues - ability to assign Rx and Tx
        queues to application threads
      - PTP and PPS (pulse-per-second) extensions

   - Broadcom Ethernet (bnxt)
      - devlink health reporting and device reload extensions

   - Mellanox Ethernet (mlx5)
      - offload macvlan interfaces
      - support HW offload of TC rules involving OVS internal ports
      - support HW-GRO and header/data split
      - support application device queues

   - Marvell OcteonTx2:
      - add XDP support for PF
      - add PTP support for VF

   - Qualcomm Ethernet switch (qca8k): support for QCA8328

   - Realtek Ethernet DSA switch (rtl8366rb)
      - support bridge offload
      - support STP, fast aging, disabling address learning
      - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch

   - Mellanox Ethernet/IB switch (mlxsw)
      - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
      - offload root TBF qdisc as port shaper
      - support multiple routing interface MAC address prefixes
      - support for IP-in-IP with IPv6 underlay

   - MediaTek WiFi (mt76)
      - mt7921 - ASPM, 6GHz, SDIO and testmode support
      - mt7915 - LED and TWT support

   - Qualcomm WiFi (ath11k)
      - include channel rx and tx time in survey dump statistics
      - support for 80P80 and 160 MHz bandwidths
      - support channel 2 in 6 GHz band
      - spectral scan support for QCN9074
      - support for rx decapsulation offload (data frames in 802.3
        format)

   - Qualcomm phone SoC WiFi (wcn36xx)
      - enable Idle Mode Power Save (IMPS) to reduce power consumption
        during idle

   - Bluetooth driver support for MediaTek MT7922 and MT7921

   - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
     Realtek 8822C/8852A

   - Microsoft vNIC driver (mana)
      - support hibernation and kexec

   - Google vNIC driver (gve)
      - support for jumbo frames
      - implement Rx page reuse

  Refactor:

   - Make all writes to netdev->dev_addr go thru helpers, so that we can
     add this address to the address rbtree and handle the updates

   - Various TCP cleanups and optimizations including improvements to
     CPU cache use

   - Simplify the gnet_stats, Qdisc stats' handling and remove
     qdisc->running sequence counter

   - Driver changes and API updates to address devlink locking
     deficiencies"

* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
  Revert "net: avoid double accounting for pure zerocopy skbs"
  selftests: net: add arp_ndisc_evict_nocarrier
  net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
  net: arp: introduce arp_evict_nocarrier sysctl parameter
  libbpf: Deprecate AF_XDP support
  kbuild: Unify options for BTF generation for vmlinux and modules
  selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
  bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
  bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
  net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
  net: avoid double accounting for pure zerocopy skbs
  tcp: rename sk_wmem_free_skb
  netdevsim: fix uninit value in nsim_drv_configure_vfs()
  selftests/bpf: Fix also no-alu32 strobemeta selftest
  bpf: Add missing map_delete_elem method to bloom filter map
  selftests/bpf: Add bloom map success test for userspace calls
  bpf: Add alignment padding for "map_extra" + consolidate holes
  bpf: Bloom filter map naming fixups
  selftests/bpf: Add test cases for struct_ops prog
  bpf: Add dummy BPF STRUCT_OPS for test purpose
  ...

mips: fix HUGETLB function without THP enabled

2021-11-02T10:15:09+00:00

ltp test futex_wake04 without THP enabled leads to below bt:
  [] BUG+0x0/0x8
  [] internal_get_user_pages_fast+0x81c/0x820
  [] get_futex_key+0xa0/0x480
  [] futex_wait_setup+0x7c/0x1a8
  [] futex_wait+0x120/0x228
  [] do_futex+0x140/0xbd8
  [] sys_futex+0x10c/0x1c0
  [] syscall_common+0x34/0x58

Move pmd_write() and pmd_page() from TRANSPARENT_HUGEPAGE scope to
MIPS_HUGE_TLB_SUPPORT scope, because both THP and HUGETLB will need
them.

Signed-off-by: Zhaolong Zhang 
Signed-off-by: Thomas Bogendoerfer

mips: cm: Convert to bitfield API to fix out-of-bounds access

2021-11-02T09:53:52+00:00

mips_cm_error_report() extracts the cause and other cause from the error
register using shifts.  This works fine for the former, as it is stored
in the top bits, and the shift will thus remove all non-related bits.
However, the latter is stored in the bottom bits, hence thus needs masking
to get rid of non-related bits.  Without such masking, using it as an
index into the cm2_causes[] array will lead to an out-of-bounds access,
probably causing a crash.

Fix this by using FIELD_GET() instead.  Bite the bullet and convert all
MIPS CM handling to the bitfield API, to improve readability and safety.

Fixes: 3885c2b463f6a236 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Geert Uytterhoeven 
Reviewed-by: Jiaxun Yang 
Signed-off-by: Thomas Bogendoerfer

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2021-11-02T02:59:46+00:00

Alexei Starovoitov says:

====================
pull-request: bpf-next 2021-11-01

We've added 181 non-merge commits during the last 28 day(s) which contain
a total of 280 files changed, 11791 insertions(+), 5879 deletions(-).

The main changes are:

1) Fix bpf verifier propagation of 64-bit bounds, from Alexei.

2) Parallelize bpf test_progs, from Yucong and Andrii.

3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus.

4) Improve bpf selftests on s390, from Ilya.

5) bloomfilter bpf map type, from Joanne.

6) Big improvements to JIT tests especially on Mips, from Johan.

7) Support kernel module function calls from bpf, from Kumar.

8) Support typeless and weak ksym in light skeleton, from Kumar.

9) Disallow unprivileged bpf by default, from Pawan.

10) BTF_KIND_DECL_TAG support, from Yonghong.

11) Various bpftool cleanups, from Quentin.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits)
  libbpf: Deprecate AF_XDP support
  kbuild: Unify options for BTF generation for vmlinux and modules
  selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
  bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
  bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
  selftests/bpf: Fix also no-alu32 strobemeta selftest
  bpf: Add missing map_delete_elem method to bloom filter map
  selftests/bpf: Add bloom map success test for userspace calls
  bpf: Add alignment padding for "map_extra" + consolidate holes
  bpf: Bloom filter map naming fixups
  selftests/bpf: Add test cases for struct_ops prog
  bpf: Add dummy BPF STRUCT_OPS for test purpose
  bpf: Factor out helpers for ctx access checking
  bpf: Factor out a helper to prepare trampoline for struct_ops prog
  selftests, bpf: Fix broken riscv build
  riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h
  tools, build: Add RISC-V to HOSTARCH parsing
  riscv, bpf: Increase the maximum number of iterations
  selftests, bpf: Add one test for sockmap with strparser
  selftests, bpf: Fix test_txmsg_ingress_parser error
  ...
====================

Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski