linux-toradex.git/arch/mips/include/uapi, branch v5.11-rc5 Linux kernel for Apalis and Colibri modules Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2020-12-15T21:22:29+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-12-15T21:22:29+00:00 d635a69dd4981cc51f90293f5f64268620ed1565 Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ... 
Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...
net: Add SO_BUSY_POLL_BUDGET socket option 2020-11-30T23:09:25+00:00 Björn Töpel bjorn.topel@intel.com 2020-11-30T18:51:57+00:00 7c951cafc0cb2e575f1d58677b95ac387ac0a5bd This option lets a user set a per socket NAPI budget for busy-polling. If the options is not set, it will use the default of 8. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20201130185205.196029-3-bjorn.topel@gmail.com 
This option lets a user set a per socket NAPI budget for
busy-polling. If the options is not set, it will use the default of 8.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20201130185205.196029-3-bjorn.topel@gmail.com
net: Introduce preferred busy-polling 2020-11-30T23:09:25+00:00 Björn Töpel bjorn.topel@intel.com 2020-11-30T18:51:56+00:00 7fd3253a7de6a317a0683f83739479fb880bffc8 The existing busy-polling mode, enabled by the SO_BUSY_POLL socket option or system-wide using the /proc/sys/net/core/busy_read knob, is an opportunistic. That means that if the NAPI context is not scheduled, it will poll it. If, after busy-polling, the budget is exceeded the busy-polling logic will schedule the NAPI onto the regular softirq handling. One implication of the behavior above is that a busy/heavy loaded NAPI context will never enter/allow for busy-polling. Some applications prefer that most NAPI processing would be done by busy-polling. This series adds a new socket option, SO_PREFER_BUSY_POLL, that works in concert with the napi_defer_hard_irqs and gro_flush_timeout knobs. The napi_defer_hard_irqs and gro_flush_timeout knobs were introduced in commit 6f8b12d661d0 ("net: napi: add hard irqs deferral feature"), and allows for a user to defer interrupts to be enabled and instead schedule the NAPI context from a watchdog timer. When a user enables the SO_PREFER_BUSY_POLL, again with the other knobs enabled, and the NAPI context is being processed by a softirq, the softirq NAPI processing will exit early to allow the busy-polling to be performed. If the application stops performing busy-polling via a system call, the watchdog timer defined by gro_flush_timeout will timeout, and regular softirq handling will resume. In summary; Heavy traffic applications that prefer busy-polling over softirq processing should use this option. Example usage: $ echo 2 | sudo tee /sys/class/net/ens785f1/napi_defer_hard_irqs $ echo 200000 | sudo tee /sys/class/net/ens785f1/gro_flush_timeout Note that the timeout should be larger than the userspace processing window, otherwise the watchdog will timeout and fall back to regular softirq processing. Enable the SO_BUSY_POLL/SO_PREFER_BUSY_POLL options on your socket. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20201130185205.196029-2-bjorn.topel@gmail.com 
The existing busy-polling mode, enabled by the SO_BUSY_POLL socket
option or system-wide using the /proc/sys/net/core/busy_read knob, is
an opportunistic. That means that if the NAPI context is not
scheduled, it will poll it. If, after busy-polling, the budget is
exceeded the busy-polling logic will schedule the NAPI onto the
regular softirq handling.

One implication of the behavior above is that a busy/heavy loaded NAPI
context will never enter/allow for busy-polling. Some applications
prefer that most NAPI processing would be done by busy-polling.

This series adds a new socket option, SO_PREFER_BUSY_POLL, that works
in concert with the napi_defer_hard_irqs and gro_flush_timeout
knobs. The napi_defer_hard_irqs and gro_flush_timeout knobs were
introduced in commit 6f8b12d661d0 ("net: napi: add hard irqs deferral
feature"), and allows for a user to defer interrupts to be enabled and
instead schedule the NAPI context from a watchdog timer. When a user
enables the SO_PREFER_BUSY_POLL, again with the other knobs enabled,
and the NAPI context is being processed by a softirq, the softirq NAPI
processing will exit early to allow the busy-polling to be performed.

If the application stops performing busy-polling via a system call,
the watchdog timer defined by gro_flush_timeout will timeout, and
regular softirq handling will resume.

In summary; Heavy traffic applications that prefer busy-polling over
softirq processing should use this option.

Example usage:

  $ echo 2 | sudo tee /sys/class/net/ens785f1/napi_defer_hard_irqs
  $ echo 200000 | sudo tee /sys/class/net/ens785f1/gro_flush_timeout

Note that the timeout should be larger than the userspace processing
window, otherwise the watchdog will timeout and fall back to regular
softirq processing.

Enable the SO_BUSY_POLL/SO_PREFER_BUSY_POLL options on your socket.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20201130185205.196029-2-bjorn.topel@gmail.com
arch: move SA_* definitions to generic headers 2020-11-23T16:31:05+00:00 Peter Collingbourne pcc@google.com 2020-11-13T02:53:33+00:00 1d82b7898f2ad9cc414805aef23b99b742218f10 Most architectures with the exception of alpha, mips, parisc and sparc use the same values for these flags. Move their definitions into asm-generic/signal-defs.h and allow the architectures with non-standard values to override them. Also, document the non-standard flag values in order to make it easier to add new generic flags in the future. A consequence of this change is that on powerpc and x86, the constants' values aside from SA_RESETHAND change signedness from unsigned to signed. This is not expected to impact realistic use of these constants. In particular the typical use of the constants where they are or'ed together and assigned to sa_flags (or another int variable) would not be affected. Signed-off-by: Peter Collingbourne <pcc@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528 Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> 
Most architectures with the exception of alpha, mips, parisc and
sparc use the same values for these flags. Move their definitions into
asm-generic/signal-defs.h and allow the architectures with non-standard
values to override them. Also, document the non-standard flag values
in order to make it easier to add new generic flags in the future.

A consequence of this change is that on powerpc and x86, the constants'
values aside from SA_RESETHAND change signedness from unsigned
to signed. This is not expected to impact realistic use of these
constants. In particular the typical use of the constants where they
are or'ed together and assigned to sa_flags (or another int variable)
would not be affected.

Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528
Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
MIPS: Retire kvm paravirt 2020-07-24T08:53:23+00:00 Jiaxun Yang jiaxun.yang@flygoat.com 2020-07-10T06:30:16+00:00 35546aeede8ee9f93b404eeb6caefb46ee211ae8 paravirt machine was introduced for Cavium's partial virtualization technology, however, it's host side support and QEMU support never landed in upstream. As Cavium was acquired by Marvel and they have no intention to maintain their MIPS product line, also paravirt is unlikely to be utilized by community users, it's time to retire it if nobody steps in to maintain it. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 
paravirt machine was introduced for Cavium's partial virtualization
technology, however, it's host side support and QEMU support never
landed in upstream.

As Cavium was acquired by Marvel and they have no intention to maintain
their MIPS product line, also paravirt is unlikely to be utilized by
community users, it's time to retire it if nobody steps in to maintain
it.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
KVM: MIPS: Add CPUCFG emulation for Loongson-3 2020-06-04T17:51:33+00:00 Huacai Chen chenhc@lemote.com 2020-05-23T07:56:38+00:00 7f2a83f1c2a941ebfee53f504ed5fdbc61cfb333 Loongson-3 overrides lwc2 instructions to implement CPUCFG and CSR read/write functions. These instructions all cause guest exit so CSR doesn't benifit KVM guest (and there are always legacy methods to provide the same functions as CSR). So, we only emulate CPUCFG and let it return a reduced feature list (which means the virtual CPU doesn't have any other advanced features, including CSR) in KVM. Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <1590220602-3547-12-git-send-email-chenhc@lemote.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 
Loongson-3 overrides lwc2 instructions to implement CPUCFG and CSR
read/write functions. These instructions all cause guest exit so CSR
doesn't benifit KVM guest (and there are always legacy methods to
provide the same functions as CSR). So, we only emulate CPUCFG and let
it return a reduced feature list (which means the virtual CPU doesn't
have any other advanced features, including CSR) in KVM.

Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1590220602-3547-12-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MIPS: Expose Loongson CPUCFG availability via HWCAP 2020-05-31T08:53:56+00:00 WANG Xuerui git@xen0n.name 2020-05-30T07:32:42+00:00 f06da27eb82e358ca389ccb9d13de61e94e77a47 The point is to allow userspace to probe for CPUCFG without possibly triggering invalid instructions. In addition to that, future Loongson feature bits could all be stuffed into CPUCFG bit fields (or "leaves" in x86-speak) if Loongson does not make mistakes, so ELF HWCAP bits are conserved. Userspace can determine native CPUCFG availability by checking the LCSRP (Loongson CSR Present) bit in CPUCFG output after seeing CPUCFG bit in HWCAP. Native CPUCFG always sets the LCSRP bit, as CPUCFG is part of the Loongson CSR ASE, while the emulation intentionally leaves this bit clear. The other existing Loongson-specific HWCAP bits are, to my best knowledge, unused, as (1) they are fairly recent additions, (2) Loongson never back-ported the patch into their kernel fork, and (3) Loongson's existing installed base rarely upgrade, if ever; However, they are still considered userspace ABI, hence unfortunately unremovable. But hopefully at least we could stop adding new Loongson HWCAP bits in the future. Cc: Paul Burton <paulburton@kernel.org> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Huacai Chen <chenhc@lemote.com> Signed-off-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 
The point is to allow userspace to probe for CPUCFG without possibly
triggering invalid instructions. In addition to that, future Loongson
feature bits could all be stuffed into CPUCFG bit fields (or "leaves"
in x86-speak) if Loongson does not make mistakes, so ELF HWCAP bits are
conserved.

Userspace can determine native CPUCFG availability by checking the LCSRP
(Loongson CSR Present) bit in CPUCFG output after seeing CPUCFG bit in
HWCAP. Native CPUCFG always sets the LCSRP bit, as CPUCFG is part of the
Loongson CSR ASE, while the emulation intentionally leaves this bit
clear.

The other existing Loongson-specific HWCAP bits are, to my best
knowledge, unused, as

(1) they are fairly recent additions,
(2) Loongson never back-ported the patch into their kernel fork, and
(3) Loongson's existing installed base rarely upgrade, if ever;

However, they are still considered userspace ABI, hence unfortunately
unremovable. But hopefully at least we could stop adding new Loongson
HWCAP bits in the future.

Cc: Paul Burton <paulburton@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Huacai Chen <chenhc@lemote.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: Loongson-3: Add some unaligned instructions emulation 2020-04-24T16:18:38+00:00 Huacai Chen chenhc@lemote.com 2020-04-24T10:56:46+00:00 f83e4f9896eff614d0f2547a561fa5f39f9cddde 1, Add unaligned gslq, gssq, gslqc1, gssqc1 emulation; 2, Add unaligned gsl{h, w, d}x, gss{h, w, d}x emulation; 3, Add unaligned gslwxc1, gsswxc1, gsldxc1, gssdxc1 emulation. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Pei Huang <huangpei@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 
1, Add unaligned gslq, gssq, gslqc1, gssqc1 emulation;
2, Add unaligned gsl{h, w, d}x, gss{h, w, d}x emulation;
3, Add unaligned gslwxc1, gsswxc1, gsldxc1, gssdxc1 emulation.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Pei Huang <huangpei@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
arch: sembuf.h: make uapi asm/sembuf.h self-contained 2019-12-05T03:44:14+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2019-12-05T00:53:03+00:00 0fb9dc28679a627f84974165c8011e0630529ece Userspace cannot compile <asm/sembuf.h> due to some missing type definitions. For example, building it for x86 fails as follows: CC usr/include/asm/sembuf.h.s In file included from <command-line>:32:0: usr/include/asm/sembuf.h:17:20: error: field `sem_perm' has incomplete type struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ ^~~~~~~~ usr/include/asm/sembuf.h:24:2: error: unknown type name `__kernel_time_t' __kernel_time_t sem_otime; /* last semop time */ ^~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:25:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused1; ^~~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:26:2: error: unknown type name `__kernel_time_t' __kernel_time_t sem_ctime; /* last change time */ ^~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:27:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused2; ^~~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:29:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t sem_nsems; /* no. of semaphores in array */ ^~~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:30:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused3; ^~~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:31:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused4; ^~~~~~~~~~~~~~~~ It is just a matter of missing include directive. Include <asm/ipcbuf.h> to make it self-contained, and add it to the compile-test coverage. Link: http://lkml.kernel.org/r/20191030063855.9989-3-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Userspace cannot compile <asm/sembuf.h> due to some missing type
definitions.  For example, building it for x86 fails as follows:

    CC      usr/include/asm/sembuf.h.s
  In file included from <command-line>:32:0:
  usr/include/asm/sembuf.h:17:20: error: field `sem_perm' has incomplete type
    struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
                      ^~~~~~~~
  usr/include/asm/sembuf.h:24:2: error: unknown type name `__kernel_time_t'
    __kernel_time_t sem_otime; /* last semop time */
    ^~~~~~~~~~~~~~~
  usr/include/asm/sembuf.h:25:2: error: unknown type name `__kernel_ulong_t'
    __kernel_ulong_t __unused1;
    ^~~~~~~~~~~~~~~~
  usr/include/asm/sembuf.h:26:2: error: unknown type name `__kernel_time_t'
    __kernel_time_t sem_ctime; /* last change time */
    ^~~~~~~~~~~~~~~
  usr/include/asm/sembuf.h:27:2: error: unknown type name `__kernel_ulong_t'
    __kernel_ulong_t __unused2;
    ^~~~~~~~~~~~~~~~
  usr/include/asm/sembuf.h:29:2: error: unknown type name `__kernel_ulong_t'
    __kernel_ulong_t sem_nsems; /* no. of semaphores in array */
    ^~~~~~~~~~~~~~~~
  usr/include/asm/sembuf.h:30:2: error: unknown type name `__kernel_ulong_t'
    __kernel_ulong_t __unused3;
    ^~~~~~~~~~~~~~~~
  usr/include/asm/sembuf.h:31:2: error: unknown type name `__kernel_ulong_t'
    __kernel_ulong_t __unused4;
    ^~~~~~~~~~~~~~~~

It is just a matter of missing include directive.

Include <asm/ipcbuf.h> to make it self-contained, and add it to
the compile-test coverage.

Link: http://lkml.kernel.org/r/20191030063855.9989-3-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch: msgbuf.h: make uapi asm/msgbuf.h self-contained 2019-12-05T03:44:14+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2019-12-05T00:53:00+00:00 9ef0e004181956e158fb7ceb9b43810a193f80cd Userspace cannot compile <asm/msgbuf.h> due to some missing type definitions. For example, building it for x86 fails as follows: CC usr/include/asm/msgbuf.h.s In file included from usr/include/asm/msgbuf.h:6:0, from <command-line>:32: usr/include/asm-generic/msgbuf.h:25:20: error: field `msg_perm' has incomplete type struct ipc64_perm msg_perm; ^~~~~~~~ usr/include/asm-generic/msgbuf.h:27:2: error: unknown type name `__kernel_time_t' __kernel_time_t msg_stime; /* last msgsnd time */ ^~~~~~~~~~~~~~~ usr/include/asm-generic/msgbuf.h:28:2: error: unknown type name `__kernel_time_t' __kernel_time_t msg_rtime; /* last msgrcv time */ ^~~~~~~~~~~~~~~ usr/include/asm-generic/msgbuf.h:29:2: error: unknown type name `__kernel_time_t' __kernel_time_t msg_ctime; /* last change time */ ^~~~~~~~~~~~~~~ usr/include/asm-generic/msgbuf.h:41:2: error: unknown type name `__kernel_pid_t' __kernel_pid_t msg_lspid; /* pid of last msgsnd */ ^~~~~~~~~~~~~~ usr/include/asm-generic/msgbuf.h:42:2: error: unknown type name `__kernel_pid_t' __kernel_pid_t msg_lrpid; /* last receive pid */ ^~~~~~~~~~~~~~ It is just a matter of missing include directive. Include <asm/ipcbuf.h> to make it self-contained, and add it to the compile-test coverage. Link: http://lkml.kernel.org/r/20191030063855.9989-2-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Userspace cannot compile <asm/msgbuf.h> due to some missing type
definitions.  For example, building it for x86 fails as follows:

    CC      usr/include/asm/msgbuf.h.s
  In file included from usr/include/asm/msgbuf.h:6:0,
                   from <command-line>:32:
  usr/include/asm-generic/msgbuf.h:25:20: error: field `msg_perm' has incomplete type
    struct ipc64_perm msg_perm;
                      ^~~~~~~~
  usr/include/asm-generic/msgbuf.h:27:2: error: unknown type name `__kernel_time_t'
    __kernel_time_t msg_stime; /* last msgsnd time */
    ^~~~~~~~~~~~~~~
  usr/include/asm-generic/msgbuf.h:28:2: error: unknown type name `__kernel_time_t'
    __kernel_time_t msg_rtime; /* last msgrcv time */
    ^~~~~~~~~~~~~~~
  usr/include/asm-generic/msgbuf.h:29:2: error: unknown type name `__kernel_time_t'
    __kernel_time_t msg_ctime; /* last change time */
    ^~~~~~~~~~~~~~~
  usr/include/asm-generic/msgbuf.h:41:2: error: unknown type name `__kernel_pid_t'
    __kernel_pid_t msg_lspid; /* pid of last msgsnd */
    ^~~~~~~~~~~~~~
  usr/include/asm-generic/msgbuf.h:42:2: error: unknown type name `__kernel_pid_t'
    __kernel_pid_t msg_lrpid; /* last receive pid */
    ^~~~~~~~~~~~~~

It is just a matter of missing include directive.

Include <asm/ipcbuf.h> to make it self-contained, and add it to
the compile-test coverage.

Link: http://lkml.kernel.org/r/20191030063855.9989-2-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>