linux-toradex.git/arch/mips/kernel/proc.c, branch v4.9.88

MIPS: Fix MIPS I ISA /proc/cpuinfo reporting

2017-07-27T22:08:04+00:00

commit e5f5a5b06e51a36f6ddf31a4a485358263953a3d upstream.

Correct a commit 515a6393dbac ("MIPS: kernel: proc: Add MIPS R6 support
to /proc/cpuinfo") regression that caused MIPS I systems to show no ISA
levels supported in /proc/cpuinfo, e.g.:

system type		: Digital DECstation 2100/3100
machine			: Unknown
processor		: 0
cpu model		: R3000 V2.0  FPU V2.0
BogoMIPS		: 10.69
wait instruction	: no
microsecond timers	: no
tlb_entries		: 64
extra interrupt vector	: no
hardware watchpoint	: no
isa			:
ASEs implemented	:
shadow register sets	: 1
kscratch registers	: 0
package			: 0
core			: 0
VCED exceptions		: not available
VCEI exceptions		: not available

and similarly exclude `mips1' from the ISA list for any processors below
MIPSr1.  This is because the condition to show `mips1' on has been made
`cpu_has_mips_r1' rather than newly-introduced `cpu_has_mips_1'.  Use
the correct condition then.

Fixes: 515a6393dbac ("MIPS: kernel: proc: Add MIPS R6 support to /proc/cpuinfo")
Signed-off-by: Maciej W. Rozycki 
Reviewed-by: James Hogan 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16758/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: Move identification of VP(E) into proc.c from smp-mt.c

2016-10-04T14:13:57+00:00

The addition of VPE information to /proc/cpuinfo used to be in smp-mt.c.
This file is not used by MIPS r6 kernels, so the Virtual Processor
information was not present for these CPU types.

Move the code to print VPE information into proc.c, add a case for MIPS
r6 CPUS, and remove the block from smp-mt.c.

Signed-off-by: Matt Redfearn 
Reviewed-by: Paul Burton 
Cc: Qais Yousef 
Cc: Zubair Lutfullah Kakakhel 
Cc: Thomas Gleixner 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13847/
Signed-off-by: Ralf Baechle

MIPS: Detect DSP v3 support

2016-05-13T12:01:57+00:00

DSPv3 is supported on all MIPSr6 systems which indicate support for DSPv2.

This doesn't require any changes to the kernel's handling of DSP
resources. The patch is to detect support and indicate it in /proc/cpuinfo

DSP v3 introduces a new instruction BPOSGE32C

Signed-off-by: Zubair Lutfullah Kakakhel 
Reviewed-by: Paul Burton 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12918/
Signed-off-by: Ralf Baechle

MIPS: Add support for XPA.

2015-03-19T16:39:49+00:00

Add support for extended physical addressing (XPA) so that
32-bit platforms can access equal to or greater than 40 bits
of physical addresses.

NOTE:
      1) XPA and EVA are not the same and cannot be used
         simultaneously.
      2) If you configure your kernel for XPA, the PTEs
         and all address sizes become 64-bit.
      3) Your platform MUST have working HIGHMEM support.

Signed-off-by: Steven J. Hill 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9355/
Signed-off-by: Ralf Baechle

MIPS: kernel: proc: Add MIPS R6 support to /proc/cpuinfo

2015-02-17T15:37:26+00:00

Print 'mips64r6' and/or 'mips32r6' if the kernel is running on
a MIPS R6 core.

Signed-off-by: Markos Chandras

MIPS: cpu: Add new cpu option for Hardware Table Walker.

2014-08-01T22:06:38+00:00

Moreover, report hardware page table walker support as 'htw' in the ASE
list of /proc/cpuinfo, if the core implements this feature.

Signed-off-by: Markos Chandras 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7334/
Signed-off-by: Ralf Baechle

MIPS: Support CPU topology files in sysfs

2014-07-30T19:45:39+00:00

This patch is prepared for Loongson's NUMA support, it offer meaningful
sysfs files such as physical_package_id, core_id, core_siblings and
thread_siblings in /sys/devices/system/cpu/cpu?/topology.

Signed-off-by: Huacai Chen 
Reviewed-by: Andreas Herrmann 
Cc: John Crispin 
Cc: Steven J. Hill 
Cc: Aurelien Jarno 
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang 
Cc: Zhangjin Wu 
Patchwork: https://patchwork.linux-mips.org/patch/7184/
Signed-off-by: Ralf Baechle

Revert "MIPS: MT: proc: Add support for printing VPE and TC ids"

2014-05-12T22:29:33+00:00

Reverts commit 795038a6910937fa167d47f6f6183db0eb8fb706 because
d6d3c9afaab47418ab2d7f874fb8aeac1f067104 provides the same functionality
in a more generic way.  Both patches applied however means that the
VPE and TC IDs get printed twice currently.

MIPS: MT: proc: Add support for printing VPE and TC ids

2014-03-31T16:17:12+00:00

And there are more CPUs or configurations that want to provide special
per-CPU information in /proc/cpuinfo.  So I think there needs to be a
hook mechanism, such as a notifier.

This is a first cut only; I need to think about what sort of looking
the notifier needs to have.  But I'd appreciate testing on MT hardware!

Signed-off-by: Ralf Baechle 
Cc: Markos Chandras 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6066/

MIPS: kernel: proc: Add EVA to the list of CPU features

2014-03-26T22:09:18+00:00

Signed-off-by: Markos Chandras