linux-toradex.git/arch/mips/kernel/smtc.c, branch v3.0.2

sched: Provide scheduler_ipi() callback in response to smp_send_reschedule()

2011-04-14T06:52:32+00:00

For future rework of try_to_wake_up() we'd like to push part of that
function onto the CPU the task is actually going to run on.

In order to do so we need a generic callback from the existing scheduler IPI.

This patch introduces such a generic callback: scheduler_ipi() and
implements it as a NOP.

BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions!

Acked-by: Russell King 
Acked-by: Martin Schwidefsky 
Acked-by: Chris Metcalf 
Acked-by: Jesper Nilsson 
Acked-by: Benjamin Herrenschmidt 
Signed-off-by: Ralf Baechle 
Reviewed-by: Frank Rowand 
Cc: Mike Galbraith 
Cc: Nick Piggin 
Cc: Linus Torvalds 
Cc: Andrew Morton 
Signed-off-by: Ingo Molnar 
Signed-off-by: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl

MIPS: Convert the irq functions to the new names

2011-03-29T12:48:07+00:00

Scripted with coccinelle.

Signed-off-by: Thomas Gleixner

MIPS: SMTC: Cleanup the hook mess and use irq_data

2011-03-25T17:45:18+00:00

Signed-off-by: Thomas Gleixner 
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2194/
Signed-off-by: Ralf Baechle

MIPS: SMTC: Use irq_data in smtc_forward_irq()

2011-03-25T17:45:18+00:00

Signed-off-by: Thomas Gleixner 
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2193/
Signed-off-by: Ralf Baechle

Fix IRQ flag handling naming

2010-10-07T13:08:55+00:00

Fix the IRQ flag handling naming.  In linux/irqflags.h under one configuration,
it maps:

	local_irq_enable() -> raw_local_irq_enable()
	local_irq_disable() -> raw_local_irq_disable()
	local_irq_save() -> raw_local_irq_save()
	...

and under the other configuration, it maps:

	raw_local_irq_enable() -> local_irq_enable()
	raw_local_irq_disable() -> local_irq_disable()
	raw_local_irq_save() -> local_irq_save()
	...

This is quite confusing.  There should be one set of names expected of the
arch, and this should be wrapped to give another set of names that are expected
by users of this facility.

Change this to have the arch provide:

	flags = arch_local_save_flags()
	flags = arch_local_irq_save()
	arch_local_irq_restore(flags)
	arch_local_irq_disable()
	arch_local_irq_enable()
	arch_irqs_disabled_flags(flags)
	arch_irqs_disabled()
	arch_safe_halt()

Then linux/irqflags.h wraps these to provide:

	raw_local_save_flags(flags)
	raw_local_irq_save(flags)
	raw_local_irq_restore(flags)
	raw_local_irq_disable()
	raw_local_irq_enable()
	raw_irqs_disabled_flags(flags)
	raw_irqs_disabled()
	raw_safe_halt()

with type checking on the flags 'arguments', and then wraps those to provide:

	local_save_flags(flags)
	local_irq_save(flags)
	local_irq_restore(flags)
	local_irq_disable()
	local_irq_enable()
	irqs_disabled_flags(flags)
	irqs_disabled()
	safe_halt()

with tracing included if enabled.

The arch functions can now all be inline functions rather than some of them
having to be macros.

Signed-off-by: David Howells  [X86, FRV, MN10300]
Signed-off-by: Chris Metcalf  [Tile]
Signed-off-by: Michal Simek  [Microblaze]
Tested-by: Catalin Marinas  [ARM]
Acked-by: Thomas Gleixner 
Acked-by: Haavard Skinnemoen  [AVR]
Acked-by: Tony Luck  [IA-64]
Acked-by: Hirokazu Takata  [M32R]
Acked-by: Greg Ungerer  [M68K/M68KNOMMU]
Acked-by: Ralf Baechle  [MIPS]
Acked-by: Kyle McMartin  [PA-RISC]
Acked-by: Paul Mackerras  [PowerPC]
Acked-by: Martin Schwidefsky  [S390]
Acked-by: Chen Liqin  [Score]
Acked-by: Matt Fleming  [SH]
Acked-by: David S. Miller  [Sparc]
Acked-by: Chris Zankel  [Xtensa]
Reviewed-by: Richard Henderson  [Alpha]
Reviewed-by: Yoshinori Sato  [H8300]
Cc: starvik@axis.com [CRIS]
Cc: jesper.nilsson@axis.com [CRIS]
Cc: linux-cris-kernel@axis.com

MIPS: SMTC: Use %p to format pointers

2010-08-05T12:26:26+00:00

While at it, drop 0x prefix.

Signed-off-by: Kulikov Vasiliy 
To: kernel-janitors@vger.kernel.org
Cc: Chris Dearman 
Cc: "Robert P. J. Day" 
Cc: Rusty Russell 
Cc: André Goddard Rosa 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1458/
Signed-off-by: Ralf Baechle

MIPS: Initialize an atomic_t properly with ATOMIC_INIT(0).

2010-04-12T16:26:12+00:00

Signed-off-by: Robert P. J. Day 
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1008/
Signed-off-by: Ralf Baechle

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo 
Guess-its-ok-by: Christoph Lameter 
Cc: Ingo Molnar 
Cc: Lee Schermerhorn

MIPS: Tracing: Add IRQENTRY_EXIT section for MIPS

2009-12-17T01:57:24+00:00

This patch add a new section for MIPS to record the block of the hardirq
handling for function graph tracer(print_graph_irq) via adding the
__irq_entry annotation to the the entrypoints of the hardirqs(the block
with irq_enter()...irq_exit()).

Thanks goes to Steven & Frederic Weisbecker for their feedbacks.

Signed-off-by: Wu Zhangjin 
Cc: Steven Rostedt 
Cc: Nicholas Mc Guire 
Cc: zhangfx@lemote.com
Cc: Wu Zhangjin 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: Frederic Weisbecker 
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Reviewed-by: Frederic Weisbecker 
Patchwork: http://patchwork.linux-mips.org/patch/676/
Signed-off-by: Ralf Baechle

tree-wide: fix assorted typos all over the place

2009-12-04T14:39:55+00:00

That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa 
Signed-off-by: Jiri Kosina