linux-toradex.git/arch/mips/kernel, branch v5.18

MIPS: Fix CP0 counter erratum detection for R4k CPUs

2022-04-29T13:52:00+00:00

Fix the discrepancy between the two places we check for the CP0 counter
erratum in along with the incorrect comparison of the R4400 revision
number against 0x30 which matches none and consistently consider all
R4000 and R4400 processors affected, as documented in processor errata
publications[1][2][3], following the mapping between CP0 PRId register
values and processor models:

  PRId   |  Processor Model
---------+--------------------
00000422 | R4000 Revision 2.2
00000430 | R4000 Revision 3.0
00000440 | R4400 Revision 1.0
00000450 | R4400 Revision 2.0
00000460 | R4400 Revision 3.0

No other revision of either processor has ever been spotted.

Contrary to what has been stated in commit ce202cbb9e0b ("[MIPS] Assume
R4000/R4400 newer than 3.0 don't have the mfc0 count bug") marking the
CP0 counter as buggy does not preclude it from being used as either a
clock event or a clock source device.  It just cannot be used as both at
a time, because in that case clock event interrupts will be occasionally
lost, and the use as a clock event device takes precedence.

Compare against 0x4ff in `can_use_mips_counter' so that a single machine
instruction is produced.

References:

[1] "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", MIPS
    Technologies Inc., May 10, 1994, Erratum 53, p.13

[2] "MIPS R4400PC/SC Errata, Processor Revision 1.0", MIPS Technologies
    Inc., February 9, 1994, Erratum 21, p.4

[3] "MIPS R4400PC/SC Errata, Processor Revision 2.0 & 3.0", MIPS
    Technologies Inc., January 24, 1995, Erratum 14, p.3

Signed-off-by: Maciej W. Rozycki 
Fixes: ce202cbb9e0b ("[MIPS] Assume R4000/R4400 newer than 3.0 don't have the mfc0 count bug")
Cc: stable@vger.kernel.org # v2.6.24+
Reviewed-by: Philippe Mathieu-Daudé 
Signed-off-by: Thomas Bogendoerfer

Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2022-03-31T18:59:03+00:00

Pull Kbuild updates from Masahiro Yamada:

 - Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
   additional flags to be passed to user-space programs.

 - Fix missing fflush() bugs in Kconfig and fixdep

 - Fix a minor bug in the comment format of the .config file

 - Make kallsyms ignore llvm's local labels, .L*

 - Fix UAPI compile-test for cross-compiling with Clang

 - Extend the LLVM= syntax to support LLVM= form for using a
   particular version of LLVm, and LLVM= form for using custom
   LLVM in a particular directory path.

 - Clean up Makefiles

* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Make $(LLVM) more flexible
  kbuild: add --target to correctly cross-compile UAPI headers with Clang
  fixdep: use fflush() and ferror() to ensure successful write to files
  arch: syscalls: simplify uapi/kapi directory creation
  usr/include: replace extra-y with always-y
  certs: simplify empty certs creation in certs/Makefile
  certs: include certs/signing_key.x509 unconditionally
  kallsyms: ignore all local labels prefixed by '.L'
  kconfig: fix missing '# end of' for empty menu
  kconfig: add fflush() before ferror() check
  kbuild: replace $(if A,A,B) with $(or A,B)
  kbuild: Add environment variables for userprogs flags
  kbuild: unify cmd_copy and cmd_shipped

arch: syscalls: simplify uapi/kapi directory creation

2022-03-31T03:03:46+00:00

$(shell ...) expands to empty. There is no need to assign it to _dummy.

Signed-off-by: Masahiro Yamada 
Acked-by: Geert Uytterhoeven

Merge tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2022-03-29T00:29:53+00:00

Pull ptrace cleanups from Eric Biederman:
 "This set of changes removes tracehook.h, moves modification of all of
  the ptrace fields inside of siglock to remove races, adds a missing
  permission check to ptrace.c

  The removal of tracehook.h is quite significant as it has been a major
  source of confusion in recent years. Much of that confusion was around
  task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
  semantics clearer).

  For people who don't know tracehook.h is a vestiage of an attempt to
  implement uprobes like functionality that was never fully merged, and
  was later superseeded by uprobes when uprobes was merged. For many
  years now we have been removing what tracehook functionaly a little
  bit at a time. To the point where anything left in tracehook.h was
  some weird strange thing that was difficult to understand"

* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ptrace: Remove duplicated include in ptrace.c
  ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
  ptrace: Return the signal to continue with from ptrace_stop
  ptrace: Move setting/clearing ptrace_message into ptrace_stop
  tracehook: Remove tracehook.h
  resume_user_mode: Move to resume_user_mode.h
  resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
  signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
  task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
  task_work: Call tracehook_notify_signal from get_signal on all architectures
  task_work: Introduce task_work_pending
  task_work: Remove unnecessary include from posix_timers.h
  ptrace: Remove tracehook_signal_handler
  ptrace: Remove arch_syscall_{enter,exit}_tracehook
  ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
  ptrace/arm: Rename tracehook_report_syscall report_syscall
  ptrace: Move ptrace_report_syscall into ptrace.h

Merge tag 'mips_5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2022-03-25T16:35:19+00:00

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for QCN550x (ath79)

 - enabled KCSAN

 - removed TX39XX support

 - various cleanups and fixes

* tag 'mips_5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (31 commits)
  MIPS: Fix build error for loongson64 and sgi-ip27
  MIPS: ingenic: correct unit node address
  MIPS: Fix wrong comments in asm/prom.h
  MIPS: Remove redundant definitions of device_tree_init()
  MIPS: Remove redundant check in device_tree_init()
  MIPS: pgalloc: fix memory leak caused by pgd_free()
  MIPS: RB532: fix return value of __setup handler
  MIPS: Only use current_stack_pointer on GCC
  MIPS: boot/compressed: Use array reference for image bounds
  mips: cdmm: Fix refcount leak in mips_cdmm_phys_base
  mips: remove reference to "newer Loongson-3"
  mips: Always permit to build u-boot images
  MIPS: Sanitise Cavium switch cases in TLB handler synthesizers
  DEC: Limit PMAX memory probing to R3k systems
  mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n
  MIPS: fix fortify panic when copying asm exception handlers
  mips: ralink: fix a refcount leak in ill_acc_of_setup()
  mips: Implement "current_stack_pointer"
  MIPS: Remove TX39XX support
  MIPS: Modernize READ_IMPLIES_EXEC
  ...

Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2022-03-24T01:03:08+00:00

Pull asm-generic updates from Arnd Bergmann:
 "There are three sets of updates for 5.18 in the asm-generic tree:

   - The set_fs()/get_fs() infrastructure gets removed for good.

     This was already gone from all major architectures, but now we can
     finally remove it everywhere, which loses some particularly tricky
     and error-prone code. There is a small merge conflict against a
     parisc cleanup, the solution is to use their new version.

   - The nds32 architecture ends its tenure in the Linux kernel.

     The hardware is still used and the code is in reasonable shape, but
     the mainline port is not actively maintained any more, as all
     remaining users are thought to run vendor kernels that would never
     be updated to a future release.

   - A series from Masahiro Yamada cleans up some of the uapi header
     files to pass the compile-time checks"

* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
  nds32: Remove the architecture
  uaccess: remove CONFIG_SET_FS
  ia64: remove CONFIG_SET_FS support
  sh: remove CONFIG_SET_FS support
  sparc64: remove CONFIG_SET_FS support
  lib/test_lockup: fix kernel pointer check for separate address spaces
  uaccess: generalize access_ok()
  uaccess: fix type mismatch warnings from access_ok()
  arm64: simplify access_ok()
  m68k: fix access_ok for coldfire
  MIPS: use simpler access_ok()
  MIPS: Handle address errors for accesses above CPU max virtual user address
  uaccess: add generic __{get,put}_kernel_nofault
  nios2: drop access_ok() check from __put_user()
  x86: use more conventional access_ok() definition
  x86: remove __range_not_ok()
  sparc64: add __{get,put}_kernel_nofault()
  nds32: fix access_ok() checks in get/put_user
  uaccess: fix nios2 and microblaze get_user_8()
  sparc64: fix building assembly files
  ...

drivers/base/node: consolidate node device subsystem initialization in node_dev_init()

2022-03-22T22:57:10+00:00

...  and call node_dev_init() after memory_dev_init() from driver_init(),
so before any of the existing arch/subsys calls.  All online nodes should
be known at that point: early during boot, arch code determines node and
zone ranges and sets the relevant nodes online; usually this happens in
setup_arch().

This is in line with memory_dev_init(), which initializes the memory
device subsystem and creates all memory block devices.

Similar to memory_dev_init(), panic() if anything goes wrong, we don't
want to continue with such basic initialization errors.

The important part is that node_dev_init() gets called after
memory_dev_init() and after cpu_dev_init(), but before any of the relevant
archs call register_cpu() to register the new cpu device under the node
device.  The latter should be the case for the current users of
topology_init().

Link: https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com
Signed-off-by: David Hildenbrand 
Reviewed-by: Oscar Salvador 
Tested-by: Anatoly Pugachev  (sparc64)
Cc: Greg Kroah-Hartman 
Cc: Michal Hocko 
Cc: Oscar Salvador 
Cc: Mike Rapoport 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Thomas Bogendoerfer 
Cc: Michael Ellerman 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Paul Walmsley 
Cc: Palmer Dabbelt 
Cc: Albert Ou 
Cc: Heiko Carstens 
Cc: Vasily Gorbik 
Cc: Yoshinori Sato 
Cc: Rich Felker 
Cc: "David S. Miller" 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Borislav Petkov 
Cc: Dave Hansen 
Cc: "Rafael J. Wysocki" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

MIPS: Remove redundant definitions of device_tree_init()

2022-03-14T14:09:02+00:00

There exists many same definitions of device_tree_init() for various
platforms, add a weak function in arch/mips/kernel/prom.c to clean
up the related code.

Signed-off-by: Tiezhu Yang 
Signed-off-by: Thomas Bogendoerfer

MIPS: Only use current_stack_pointer on GCC

2022-03-14T14:02:53+00:00

Unfortunately, Clang did not have support for "sp" as a global register
definition, and was crashing after the addition of current_stack_pointer.
This has been fixed in Clang 14, but earlier Clang versions need to
avoid this code, so add a versioned test and revert back to the
open-coded asm instances. Fixes Clang build error:

fatal error: error in backend: Invalid register name global variable

Fixes: 200ed341b864 ("mips: Implement "current_stack_pointer"")
Reported-by: Nathan Chancellor 
Reviewed-by: Nathan Chancellor 
Link: https://lore.kernel.org/lkml/YikTQRql+il3HbrK@dev-arch.thelio-3990X
Cc: Thomas Bogendoerfer 
Cc: Marc Zyngier 
Cc: Guenter Roeck 
Cc: Yanteng Si 
Cc: linux-mips@vger.kernel.org
Signed-off-by: Kees Cook 
Reviewed-by: Nick Desaulniers 
Signed-off-by: Thomas Bogendoerfer

resume_user_mode: Move to resume_user_mode.h

2022-03-10T22:51:50+00:00

Move set_notify_resume and tracehook_notify_resume into resume_user_mode.h.
While doing that rename tracehook_notify_resume to resume_user_mode_work.

Update all of the places that included tracehook.h for these functions to
include resume_user_mode.h instead.

Update all of the callers of tracehook_notify_resume to call
resume_user_mode_work.

Reviewed-by: Kees Cook 
Link: https://lkml.kernel.org/r/20220309162454.123006-12-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman"