linux-toradex.git/arch/mips/loongson, branch v3.12-rc2

MIPS: Loongson: Hide the pci code behind CONFIG_PCI

2013-09-03T13:27:39+00:00

The pci.c code depends on symbols which are only visible
if CONFIG_PCI is selected.

Also fixes the following problem on loongson allnoconfig:
arch/mips/built-in.o: In function `pcibios_init':
pci.c:(.init.text+0x528):
undefined reference to `register_pci_controller'
arch/mips/built-in.o:(.data+0xc):
undefined reference to `loongson_pci_ops'

Signed-off-by: Markos Chandras 
Acked-by: Steven J. Hill 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5584/
Signed-off-by: Ralf Baechle

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2013-07-13T21:52:21+00:00

Pull MIPS updates from Ralf Baechle:
 "MIPS updates:

   - All the things that didn't make 3.10.
   - Removes the Windriver PPMC platform.  Nobody will miss it.
   - Remove a workaround from kernel/irq/irqdomain.c which was there
     exclusivly for MIPS.  Patch by Grant Likely.
   - More small improvments for the SEAD 3 platform
   - Improvments on the BMIPS / SMP support for the BCM63xx series.
   - Various cleanups of dead leftovers.
   - Platform support for the Cavium Octeon-based EdgeRouter Lite.

  Two large KVM patchsets didn't make it for this pull request because
  their respective authors are vacationing"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits)
  MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER
  MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions
  MIPS: SEAD3: Disable L2 cache on SEAD-3.
  MIPS: BCM63xx: Enable second core SMP on BCM6328 if available
  MIPS: BCM63xx: Add SMP support to prom.c
  MIPS: define write{b,w,l,q}_relaxed
  MIPS: Expose missing pci_io{map,unmap} declarations
  MIPS: Malta: Update GCMP detection.
  Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"
  MIPS: APSP: Remove 
  SSB: Kconfig: Amend SSB_EMBEDDED dependencies
  MIPS: microMIPS: Fix improper definition of ISA exception bit.
  MIPS: Don't try to decode microMIPS branch instructions where they cannot exist.
  MIPS: Declare emulate_load_store_microMIPS as a static function.
  MIPS: Fix typos and cleanup comment
  MIPS: Cleanup indentation and whitespace
  MIPS: BMIPS: support booting from physical CPU other than 0
  MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS
  MIPS: GIC: Fix gic_set_affinity infinite loop
  MIPS: Don't save/restore OCTEON wide multiplier state on syscalls.
  ...

MIPS: Loongson: Fix random early boot hang

2013-06-21T16:07:01+00:00

Some Loongson boards (e.g. Lemote FuLoong mini-PC) use ISA/southbridge
device (CS5536 general purpose timer) for the timer interrupt. It starts
running early and is already enabled during the PCI configuration,
during which there is a small window in pci_read_base() when the register
access is temporarily disabled. If the timer interrupts at this point,
the system will hang. Fix this by adding a fixup that keeps the register
access always enabled.

The hang the patch fixes usually looks like this:

[    0.844000] pci 0000:00:0e.0: [1022:2090] type 00 class 0x060100
[    0.848000] pci 0000:00:0e.0: reg 10: [io  0xb410-0xb417]
[    0.852000] pci 0000:00:0e.0: reg 14: [io  0xb000-0xb0ff]
[    0.856000] pci 0000:00:0e.0: reg 18: [io  0xb380-0xb3bf]
[   28.140000] BUG: soft lockup - CPU#0 stuck for 23s! [swapper:1]
[   28.140000] Modules linked in:
[   28.140000] irq event stamp: 37965
[   28.140000] hardirqs last  enabled at (37964): [] restore_partial+0x6c/0x13c
[   28.140000] hardirqs last disabled at (37965): [] handle_int+0x144/0x15c
[   28.140000] softirqs last  enabled at (24316): [] __do_softirq+0x1cc/0x258
[   28.140000] softirqs last disabled at (24327): [] do_softirq+0xc8/0xd0
[   28.140000] Cpu 0
[   28.140000] $ 0   : 0000000000000000 00000000140044e1 980000009f090000 0000000000000001
[   28.140000] $ 4   : 980000009f090000 0000000000000000 0000000000000100 03b7fff87fbde011
[   28.140000] $ 8   : ffffffff812b1928 000000000001e000 043ffff87fbde011 fffffff87fbde011
[   28.140000] $12   : 000000000000000e ffffffff807a0000 0000000000000698 0000000000000000
[   28.140000] $16   : 0000000000000002 ffffffff81055e20 ffffffff80786810 0000000000000000
[   28.140000] $20   : 000000000000000a ffffffff807bc244 ffffffff807e6350 ffffffff80770000
[   28.140000] $24   : 0000000000000d80 00000000fffedbe0
[   28.140000] $28   : 980000009f07c000 980000009f07fa10 ffffffff81050000 ffffffff802380f8
[   28.140000] Hi    : 0000000000d0fc00
[   28.140000] Lo    : 0000000000f82b40
[   28.140000] epc   : ffffffff8023810c __do_softirq+0xe4/0x258
[   28.140000]     Not tainted
[   28.140000] ra    : ffffffff802380f8 __do_softirq+0xd0/0x258
[   28.140000] Status: 140044e3    KX SX UX KERNEL EXL IE
[   28.140000] Cause : 10008400
[   28.140000] PrId  : 00006303 (ICT Loongson-2)

Signed-off-by: Aaro Koskinen 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4958/
Signed-off-by: Ralf Baechle

cpufreq: rename index as driver_data in cpufreq_frequency_table

2013-06-04T12:25:59+00:00

The "index" field of struct cpufreq_frequency_table was never an
index and isn't used at all by the cpufreq core.  It only is useful
for cpufreq drivers for their internal purposes.

Many people nowadays blindly set it in ascending order with the
assumption that the core will use it, which is a mistake.

Rename it to "driver_data" as that's what its purpose is. All of its
users are updated accordingly.

[rjw: Changelog]
Signed-off-by: Viresh Kumar 
Acked-by: Simon Horman 
Signed-off-by: Rafael J. Wysocki

MIPS: Idle: Consolidate all declarations in .

2013-05-21T23:34:27+00:00

Signed-off-by: Ralf Baechle

mips: loongson: use GPIO driver on CONFIG_GPIOLIB

2013-03-20T13:48:13+00:00

The GPIO driver uses gpiolib, thus it should be compiled when
CONFIG_GPIOLIB is defined and not only CONFIG_GENERIC_GPIO.

Signed-off-by: Alexandre Courbot 
Acked-by: Arnd Bergmann 
Acked-by: Linus Walleij

MIPS: Whitespace cleanup.

2013-02-01T09:00:22+00:00

Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.

Signed-off-by: Ralf Baechle

MIPS: Loongson 2: Sort out clock managment.

2012-08-01T16:10:06+00:00

For unexplainable reasons the Loongson 2 clock API was implemented in a
module so fixing this involved shifting large amounts of code around.

Signed-off-by: Ralf Baechle

MIPS: irq: Remove IRQF_DISABLED

2011-12-07T22:03:45+00:00

Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled and we even check
and yell when an interrupt handler returns with interrupts enabled (see
commit [b738a50a: genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

[ralf@linux-mips.org: Fixed up conflicts in
arch/mips/alchemy/common/dbdma.c, arch/mips/cavium-octeon/smp.c and
arch/mips/kernel/perf_event.c.]

Signed-off-by: Yong Zhang 
To: linux-kernel@vger.kernel.org
Cc: tglx@linutronix.de
linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2835/
Signed-off-by: Ralf Baechle

mips: fix implicit smp.h usage in various files.

2011-10-31T23:30:55+00:00

We need to call out inclusion of smp.h, or with the module.h cleanup
we'll get things like:

arch/mips/loongson/common/platform.c:21: error: implicit declaration of function 'smp_processor_id'

arch/mips/vr41xx/common/giu.c:84: error: implicit declaration of function 'smp_processor_id'

arch/mips/vr41xx/common/rtc.c:85: error: implicit declaration of function 'smp_processor_id'

Signed-off-by: Paul Gortmaker