linux-toradex.git/arch/mips, branch v3.12.45

MIPS: Fix KVM guest fixmap address

2015-07-30T12:10:42+00:00

commit 8e748c8d09a9314eedb5c6367d9acfaacddcdc88 upstream.

KVM guest kernels for trap & emulate run in user mode, with a modified
set of kernel memory segments. However the fixmap address is still in
the normal KSeg3 region at 0xfffe0000 regardless, causing problems when
cache alias handling makes use of them when handling copy on write.

Therefore define FIXADDR_TOP as 0x7ffe0000 in the guest kernel mapped
region when CONFIG_KVM_GUEST is defined.

Signed-off-by: James Hogan 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9887/
Signed-off-by: Ralf Baechle 
Signed-off-by: Jiri Slaby

MIPS: Fix enabling of DEBUG_STACKOVERFLOW

2015-06-23T12:55:12+00:00

commit 5f35b9cd553fd64415b563497d05a563c988dbd6 upstream.

Commit 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.

Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan 
Cc: Ralf Baechle 
Cc: Adam Jiang 
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10531/
Signed-off-by: Ralf Baechle 
Signed-off-by: Jiri Slaby

MIPS: KVM: Do not sign extend on unsigned MMIO load

2015-06-10T12:56:27+00:00

commit ed9244e6c534612d2b5ae47feab2f55a0d4b4ced upstream.

Fix possible unintended sign extension in unsigned MMIO loads by casting
to uint16_t in the case of mmio_needed != 2.

Signed-off-by: Nicholas Mc Guire 
Reviewed-by: James Hogan 
Tested-by: James Hogan 
Cc: Gleb Natapov 
Cc: Paolo Bonzini 
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9985/
Signed-off-by: Ralf Baechle 
Signed-off-by: Jiri Slaby

MIPS: Hibernate: flush TLB entries earlier

2015-05-04T09:49:48+00:00

commit a843d00d038b11267279e3b5388222320f9ddc1d upstream.

We found that TLB mismatch not only happens after kernel resume, but
also happens during snapshot restore. So move it to the beginning of
swsusp_arch_suspend().

Signed-off-by: Huacai Chen 
Cc: Steven J. Hill 
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang 
Cc: Zhangjin Wu 
Patchwork: https://patchwork.linux-mips.org/patch/9621/
Signed-off-by: Ralf Baechle 
Signed-off-by: Jiri Slaby

nosave: consolidate __nosave_{begin,end} in

2015-05-04T09:49:04+00:00

commit 7f8998c7aef3ac9c5f3f2943e083dfa6302e90d0 upstream.

The different architectures used their own (and different) declarations:

    extern __visible const void __nosave_begin, __nosave_end;
    extern const void __nosave_begin, __nosave_end;
    extern long __nosave_begin, __nosave_end;

Consolidate them using the first variant in .

Signed-off-by: Geert Uytterhoeven 
Cc: Russell King 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Martin Schwidefsky 
Cc: "David S. Miller" 
Cc: Guan Xuetao 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Jiri Slaby 
[js -- port to 3.12: arm does not have hibernation yet]

MIPS: asm/reg.h: Make 32- and 64-bit definitions available at the same time

2015-04-09T12:13:32+00:00

commit bcec7c8da6b092b1ff3327fd83c2193adb12f684 upstream.

Get rid of the WANT_COMPAT_REG_H test and instead define both the 32-
and 64-bit register offset definitions at the same time with
MIPS{32,64}_ prefixes, then define the existing EF_* names to the
correct definitions for the kernel's bitness.

This patch is a prerequisite of the following bug fix patch.

Signed-off-by: Alex Smith 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7451/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

mm/hugetlb: reduce arch dependent code around follow_huge_*

2015-03-16T10:09:27+00:00

commit 61f77eda9bbf0d2e922197ed2dcf88638a639ce5 upstream.

Currently we have many duplicates in definitions around
follow_huge_addr(), follow_huge_pmd(), and follow_huge_pud(), so this
patch tries to remove the m.  The basic idea is to put the default
implementation for these functions in mm/hugetlb.c as weak symbols
(regardless of CONFIG_ARCH_WANT_GENERAL_HUGETL B), and to implement
arch-specific code only when the arch needs it.

For follow_huge_addr(), only powerpc and ia64 have their own
implementation, and in all other architectures this function just returns
ERR_PTR(-EINVAL).  So this patch sets returning ERR_PTR(-EINVAL) as
default.

As for follow_huge_(pmd|pud)(), if (pmd|pud)_huge() is implemented to
always return 0 in your architecture (like in ia64 or sparc,) it's never
called (the callsite is optimized away) no matter how implemented it is.
So in such architectures, we don't need arch-specific implementation.

In some architecture (like mips, s390 and tile,) their current
arch-specific follow_huge_(pmd|pud)() are effectively identical with the
common code, so this patch lets these architecture use the common code.

One exception is metag, where pmd_huge() could return non-zero but it
expects follow_huge_pmd() to always return NULL.  This means that we need
arch-specific implementation which returns NULL.  This behavior looks
strange to me (because non-zero pmd_huge() implies that the architecture
supports PMD-based hugepage, so follow_huge_pmd() can/should return some
relevant value,) but that's beyond this cleanup patch, so let's keep it.

Justification of non-trivial changes:
- in s390, follow_huge_pmd() checks !MACHINE_HAS_HPAGE at first, and this
  patch removes the check. This is OK because we can assume MACHINE_HAS_HPAGE
  is true when follow_huge_pmd() can be called (note that pmd_huge() has
  the same check and always returns 0 for !MACHINE_HAS_HPAGE.)
- in s390 and mips, we use HPAGE_MASK instead of PMD_MASK as done in common
  code. This patch forces these archs use PMD_MASK, but it's OK because
  they are identical in both archs.
  In s390, both of HPAGE_SHIFT and PMD_SHIFT are 20.
  In mips, HPAGE_SHIFT is defined as (PAGE_SHIFT + PAGE_SHIFT - 3) and
  PMD_SHIFT is define as (PAGE_SHIFT + PAGE_SHIFT + PTE_ORDER - 3), but
  PTE_ORDER is always 0, so these are identical.

Signed-off-by: Naoya Horiguchi 
Acked-by: Hugh Dickins 
Cc: James Hogan 
Cc: David Rientjes 
Cc: Mel Gorman 
Cc: Johannes Weiner 
Cc: Michal Hocko 
Cc: Rik van Riel 
Cc: Andrea Arcangeli 
Cc: Luiz Capitulino 
Cc: Nishanth Aravamudan 
Cc: Lee Schermerhorn 
Cc: Steve Capper 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Jiri Slaby

vm: add VM_FAULT_SIGSEGV handling support

2015-03-12T16:31:25+00:00

commit 33692f27597fcab536d7cbbcc8f52905133e4aa7 upstream.

The core VM already knows about VM_FAULT_SIGBUS, but cannot return a
"you should SIGSEGV" error, because the SIGSEGV case was generally
handled by the caller - usually the architecture fault handler.

That results in lots of duplication - all the architecture fault
handlers end up doing very similar "look up vma, check permissions, do
retries etc" - but it generally works.  However, there are cases where
the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV.

In particular, when accessing the stack guard page, libsigsegv expects a
SIGSEGV.  And it usually got one, because the stack growth is handled by
that duplicated architecture fault handler.

However, when the generic VM layer started propagating the error return
from the stack expansion in commit fee7e49d4514 ("mm: propagate error
from stack expansion even for guard page"), that now exposed the
existing VM_FAULT_SIGBUS result to user space.  And user space really
expected SIGSEGV, not SIGBUS.

To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those
duplicate architecture fault handlers about it.  They all already have
the code to handle SIGSEGV, so it's about just tying that new return
value to the existing code, but it's all a bit annoying.

This is the mindless minimal patch to do this.  A more extensive patch
would be to try to gather up the mostly shared fault handling logic into
one generic helper routine, and long-term we really should do that
cleanup.

Just from this patch, you can generally see that most architectures just
copied (directly or indirectly) the old x86 way of doing things, but in
the meantime that original x86 model has been improved to hold the VM
semaphore for shorter times etc and to handle VM_FAULT_RETRY and other
"newer" things, so it would be a good idea to bring all those
improvements to the generic case and teach other architectures about
them too.

Reported-and-tested-by: Takashi Iwai 
Tested-by: Jan Engelhardt 
Acked-by: Heiko Carstens  # "s390 still compiles and boots"
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds 
Signed-off-by: Jiri Slaby

KVM: MIPS: Fix trace event to save PC directly

2015-03-12T16:31:12+00:00

commit b3cffac04eca9af46e1e23560a8ee22b1bd36d43 upstream.

Currently the guest exit trace event saves the VCPU pointer to the
structure, and the guest PC is retrieved by dereferencing it when the
event is printed rather than directly from the trace record. This isn't
safe as the printing may occur long afterwards, after the PC has changed
and potentially after the VCPU has been freed. Usually this results in
the same (wrong) PC being printed for multiple trace events. It also
isn't portable as userland has no way to access the VCPU data structure
when interpreting the trace record itself.

Lets save the actual PC in the structure so that the correct value is
accessible later.

Fixes: 669e846e6c4e ("KVM/MIPS32: MIPS arch specific APIs for KVM")
Signed-off-by: James Hogan 
Cc: Paolo Bonzini 
Cc: Ralf Baechle 
Cc: Marcelo Tosatti 
Cc: Gleb Natapov 
Cc: Steven Rostedt 
Cc: Ingo Molnar 
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Acked-by: Steven Rostedt 
Signed-off-by: Marcelo Tosatti 
Signed-off-by: Jiri Slaby

MIPS: Export FP functions used by lose_fpu(1) for KVM

2015-03-07T13:29:40+00:00

commit 3ce465e04bfd8de9956d515d6e9587faac3375dc upstream.

Export the _save_fp asm function used by the lose_fpu(1) macro to GPL
modules so that KVM can make use of it when it is built as a module.

This fixes the following build error when CONFIG_KVM=m due to commit
f798217dfd03 ("KVM: MIPS: Don't leak FPU/DSP to guest"):

ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined!

Signed-off-by: James Hogan 
Fixes: f798217dfd03 (KVM: MIPS: Don't leak FPU/DSP to guest)
Cc: Paolo Bonzini 
Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: Gleb Natapov 
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9260/
Signed-off-by: Ralf Baechle 
[james.hogan@imgtec.com: Only export when CPU_R4K_FPU=y prior to v3.16,
 so as not to break the Octeon build which excludes FPU support. KVM
 depends on MIPS32r2 anyway.]
Signed-off-by: James Hogan 
Signed-off-by: Jiri Slaby