linux-toradex.git/arch/mips, branch v4.4.105

MIPS: BCM47XX: Fix LED inversion for WRT54GSv1

2017-11-30T08:37:20+00:00

commit 56a46acf62af5ba44fca2f3f1c7c25a2d5385b19 upstream.

The WLAN LED on the Linksys WRT54GSv1 is active low, but the software
treats it as active high. Fix the inverted logic.

Fixes: 7bb26b169116 ("MIPS: BCM47xx: Fix LEDs on WRT54GS V1.0")
Signed-off-by: Mirko Parthey 
Looks-ok-by: Rafał Miłecki 
Cc: Hauke Mehrtens 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16071/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix an n32 core file generation regset support regression

2017-11-30T08:37:20+00:00

commit 547da673173de51f73887377eb275304775064ad upstream.

Fix a commit 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
regression, then activated by commit 6a9c001b7ec3 ("MIPS: Switch ELF
core dumper to use regsets.)", that caused n32 processes to dump o32
core files by failing to set the EF_MIPS_ABI2 flag in the ELF core file
header's `e_flags' member:

$ file tls-core
tls-core: ELF 32-bit MSB executable, MIPS, N32 MIPS64 rel2 version 1 (SYSV), [...]
$ ./tls-core
Aborted (core dumped)
$ file core
core: ELF 32-bit MSB core file MIPS, MIPS-I version 1 (SYSV), SVR4-style
$

Previously the flag was set as the result of a:

statement placed in arch/mips/kernel/binfmt_elfn32.c, however in the
regset case, i.e. when CORE_DUMP_USE_REGSET is set, ELF_CORE_EFLAGS is
no longer used by `fill_note_info' in fs/binfmt_elf.c, and instead the
`->e_flags' member of the regset view chosen is.  We have the views
defined in arch/mips/kernel/ptrace.c, however only an o32 and an n64
one, and the latter is used for n32 as well.  Consequently an o32 core
file is incorrectly dumped from n32 processes (the ELF32 vs ELF64 class
is chosen elsewhere, and the 32-bit one is correctly selected for n32).

Correct the issue then by defining an n32 regset view and using it as
appropriate.  Issue discovered in GDB testing.

Fixes: 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
Signed-off-by: Maciej W. Rozycki 
Cc: Ralf Baechle 
Cc: Djordje Todorovic 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17617/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman

MIPS: ralink: Fix typo in mt7628 pinmux function

2017-11-30T08:37:19+00:00

commit 05a67cc258e75ac9758e6f13d26337b8be51162a upstream.

There is a typo inside the pinmux setup code. The function is called
refclk and not reclk.

Fixes: 53263a1c6852 ("MIPS: ralink: add mt7628an support")
Signed-off-by: Mathias Kresin 
Acked-by: John Crispin 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16047/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman

MIPS: ralink: Fix MT7628 pinmux

2017-11-30T08:37:19+00:00

commit 8ef4b43cd3794d63052d85898e42424fd3b14d24 upstream.

According to the datasheet the REFCLK pin is shared with GPIO#37 and
the PERST pin is shared with GPIO#36.

Fixes: 53263a1c6852 ("MIPS: ralink: add mt7628an support")
Signed-off-by: Mathias Kresin 
Acked-by: John Crispin 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16046/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman

MIPS: Netlogic: Exclude netlogic,xlp-pic code from XLR builds

2017-11-21T08:21:22+00:00

[ Upstream commit 9799270affc53414da96e77e454a5616b39cdab0 ]

Code in arch/mips/netlogic/common/irq.c which handles the XLP PIC fails
to build in XLR configurations due to cpu_is_xlp9xx not being defined,
leading to the following build failure:

    arch/mips/netlogic/common/irq.c: In function ‘xlp_of_pic_init’:
    arch/mips/netlogic/common/irq.c:298:2: error: implicit declaration
    of function ‘cpu_is_xlp9xx’ [-Werror=implicit-function-declaration]
      if (cpu_is_xlp9xx()) {
      ^

Although the code was conditional upon CONFIG_OF which is indirectly
selected by CONFIG_NLM_XLP_BOARD but not CONFIG_NLM_XLR_BOARD, the
failing XLR with CONFIG_OF configuration can be configured manually or
by randconfig.

Fix the build failure by making the affected XLP PIC code conditional
upon CONFIG_CPU_XLP which is used to guard the inclusion of
asm/netlogic/xlp-hal/xlp.h that provides the required cpu_is_xlp9xx
function.

[ralf@linux-mips.org: Fixed up as per Jayachandran's suggestion.]

Signed-off-by: Paul Burton 
Cc: Jayachandran C 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14524/
Signed-off-by: Ralf Baechle 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

MIPS: init: Ensure reserved memory regions are not added to bootmem

2017-11-21T08:21:22+00:00

[ Upstream commit e89ef66d7682f031f026eee6bba03c8c2248d2a9 ]

Memories managed through boot_mem_map are generally expected to define
non-crossing areas. However, if part of a larger memory block is marked
as reserved, it would still be added to bootmem allocator as an
available block and could end up being overwritten by the allocator.

Prevent this by explicitly marking the memory as reserved it if exists
in the range used by bootmem allocator.

Signed-off-by: Marcin Nowakowski 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14608/
Signed-off-by: Ralf Baechle 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

MIPS: init: Ensure bootmem does not corrupt reserved memory

2017-11-21T08:21:22+00:00

[ Upstream commit d9b5b658210f28ed9f70c757d553e679d76e2986 ]

Current init code initialises bootmem allocator with all of the low
memory that it assumes is available, but does not check for reserved
memory block, which can lead to corruption of data that may be stored
there.
Move bootmem's allocation map to a location that does not cross any
reserved regions

Signed-off-by: Marcin Nowakowski 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14609/
Signed-off-by: Ralf Baechle 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

MIPS: End asm function prologue macros with .insn

2017-11-21T08:21:22+00:00

[ Upstream commit 08889582b8aa0bbc01a1e5a0033b9f98d2e11caa ]

When building a kernel targeting a microMIPS ISA, recent GNU linkers
will fail the link if they cannot determine that the target of a branch
or jump is microMIPS code, with errors such as the following:

    mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x542c:
    Unsupported jump between ISA modes; consider recompiling with
    interlinking enabled.
    mips-img-linux-gnu-ld: final link failed: Bad value

or:

    ./arch/mips/include/asm/uaccess.h:1017: warning: JALX to a
    non-word-aligned address

Placing anything other than an instruction at the start of a function
written in assembly appears to trigger such errors. In order to prepare
for allowing us to follow function prologue macros with an EXPORT_SYMBOL
invocation, end the prologue macros (LEAD, NESTED & FEXPORT) with a
.insn directive. This ensures that the start of the function is marked
as code, which always makes sense for functions & safely prevents us
from hitting the link errors described above.

Signed-off-by: Paul Burton 
Reviewed-by: Maciej W. Rozycki 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14508/
Signed-off-by: Ralf Baechle 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

MIPS: AR7: Ensure that serial ports are properly set up

2017-11-15T16:13:13+00:00

commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream.

Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is
never copied, resulting in a dead port.

Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type")
Signed-off-by: Oswald Buddenhagen 
[jonas.gorski: add Fixes tag]
Signed-off-by: Jonas Gorski 
Reviewed-by: Florian Fainelli 
Cc: Ralf Baechle 
Cc: Greg Kroah-Hartman 
Cc: Yoshihiro YUNOMAE 
Cc: Nicolas Schichan 
Cc: Oswald Buddenhagen 
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17543/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman

MIPS: AR7: Defer registration of GPIO

2017-11-15T16:13:13+00:00

commit e6b03ab63b4d270e0249f96536fde632409dc1dc upstream.

When called from prom init code, ar7_gpio_init() will fail as it will
call gpiochip_add() which relies on a working kmalloc() to alloc
the gpio_desc array and kmalloc is not useable yet at prom init time.

Move ar7_gpio_init() to ar7_register_devices() (a device_initcall)
where kmalloc works.

Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array")
Signed-off-by: Jonas Gorski 
Reviewed-by: Florian Fainelli 
Cc: Ralf Baechle 
Cc: Greg Kroah-Hartman 
Cc: Yoshihiro YUNOMAE 
Cc: Nicolas Schichan 
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17542/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman