linux-toradex.git/arch/mn10300, branch v4.9.54

mn10300: fix build error of missing fpu_save()

2017-06-17T04:41:56+00:00

[ Upstream commit 3705ccfdd1e8b539225ce20e3925a945cc788d67 ]

When CONFIG_FPU is not enabled on arch/mn10300,  causes
a build error with a call to fpu_save():

  kernel/built-in.o: In function `.L410':
  core.c:(.sched.text+0x28a): undefined reference to `fpu_save'

Fix this by including  in  so that an empty
static inline fpu_save() is defined.

Link: http://lkml.kernel.org/r/dc421c4f-4842-4429-1b99-92865c2f24b6@infradead.org
Signed-off-by: Randy Dunlap 
Reported-by: kbuild test robot 
Reviewed-by: David Howells 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2016-10-12T06:38:39+00:00

Pull uaccess.h prepwork from Al Viro:
 "Preparations to tree-wide switch to use of linux/uaccess.h (which,
  obviously, will allow to start unifying stuff for real). The last step
  there, ie

    PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*'
    sed -i -e "s!$PATT!#include !" \
            `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h`

  is not taken here - I would prefer to do it once just before or just
  after -rc1.  However, everything should be ready for it"

* 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  remove a stray reference to asm/uaccess.h in docs
  sparc64: separate extable_64.h, switch elf_64.h to it
  score: separate extable.h, switch module.h to it
  mips: separate extable.h, switch module.h to it
  x86: separate extable.h, switch sections.h to it
  remove stray include of asm/uaccess.h from cacheflush.h
  mn10300: remove a bogus processor.h->uaccess.h include
  xtensa: split uaccess.h into C and asm sides
  bonding: quit messing with IOCTL
  kill __kernel_ds_p off
  mn10300: finish verify_area() off
  frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
  exceptions: detritus removal

nmi_backtrace: generate one-line reports for idle cpus

2016-10-08T01:46:30+00:00

When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative.  Suppress
messages for cpus that are idling when they are interrupted and just
emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN".

We do this by grouping all the cpuidle code together into a new
.cpuidle.text section, and then checking the address of the interrupted
PC to see if it lies within that section.

This commit suitably tags x86 and tile idle routines, and only adds in
the minimal framework for other architectures.

Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf 
Acked-by: Peter Zijlstra (Intel) 
Tested-by: Peter Zijlstra (Intel) 
Tested-by: Daniel Thompson  [arm]
Tested-by: Petr Mladek 
Cc: Aaron Tomlin 
Cc: Peter Zijlstra (Intel) 
Cc: "Rafael J. Wysocki" 
Cc: Russell King 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mn10300: remove a bogus processor.h->uaccess.h include

2016-09-28T01:15:22+00:00

The only reason it used to be needed had been a (bogus) use of
set_fs() in start_thread() and that got removed in 2011...

Signed-off-by: Al Viro

kill __kernel_ds_p off

2016-09-28T01:15:20+00:00

Signed-off-by: Al Viro

mn10300: finish verify_area() off

2016-09-28T01:15:20+00:00

Signed-off-by: Al Viro

mn10300: copy_from_user() should zero on access_ok() failure...

2016-09-13T21:49:42+00:00

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro

mn10300: failing __get_user() and get_user() should zero

2016-09-13T21:49:42+00:00

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro

Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2016-08-05T13:48:22+00:00

Pull RTC updates from Alexandre Belloni:
 "RTC for 4.8

  Cleanups:
   - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
     rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
   - move mn10300 to rtc-cmos

  Subsystem:
   - fix wakealarms after hibernate
   - multiples fixes for rctest
   - simplify implementations of .read_alarm

  New drivers:
   - Maxim MAX6916

  Drivers:
   - ds1307: fix weekday
   - m41t80: add wakeup support
   - pcf85063: add support for PCF85063A variant
   - rv8803: extend i2c fix and other fixes
   - s35390a: fix alarm reading, this fixes instant reboot after
     shutdown for QNAP TS-41x
   - s3c: clock fixes"

* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
  rtc: rv8803: Clear V1F when setting the time
  rtc: rv8803: Stop the clock while setting the time
  rtc: rv8803: Always apply the I²C workaround
  rtc: rv8803: Fix read day of week
  rtc: rv8803: Remove the check for valid time
  rtc: rv8803: Kconfig: Indicate rx8900 support
  rtc: asm9260: remove .owner field for driver
  rtc: at91sam9: Fix missing spin_lock_init()
  rtc: m41t80: add suspend handlers for alarm IRQ
  rtc: m41t80: make it a real error message
  rtc: pcf85063: Add support for the PCF85063A device
  rtc: pcf85063: fix year range
  rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
  rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
  rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
  rtc: s3c: Remove unnecessary call to disable already disabled clock
  rtc: abx80x: use devm_add_action_or_reset()
  rtc: m41t80: use devm_add_action_or_reset()
  rtc: fix a typo and reduce three empty lines to one
  rtc: s35390a: improve two comments in .set_alarm
  ...

dma-mapping: use unsigned long for dma_attrs

2016-08-04T12:50:07+00:00

The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer.  Thus the pointer can point to const data.
However the attributes do not have to be a bitfield.  Instead unsigned
long will do fine:

1. This is just simpler.  Both in terms of reading the code and setting
   attributes.  Instead of initializing local attributes on the stack
   and passing pointer to it to dma_set_attr(), just set the bits.

2. It brings safeness and checking for const correctness because the
   attributes are passed by value.

Semantic patches for this change (at least most of them):

    virtual patch
    virtual context

    @r@
    identifier f, attrs;

    @@
    f(...,
    - struct dma_attrs *attrs
    + unsigned long attrs
    , ...)
    {
    ...
    }

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

and

    // Options: --all-includes
    virtual patch
    virtual context

    @r@
    identifier f, attrs;
    type t;

    @@
    t f(..., struct dma_attrs *attrs);

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski 
Acked-by: Vineet Gupta 
Acked-by: Robin Murphy 
Acked-by: Hans-Christian Noren Egtvedt 
Acked-by: Mark Salter  [c6x]
Acked-by: Jesper Nilsson  [cris]
Acked-by: Daniel Vetter  [drm]
Reviewed-by: Bart Van Assche 
Acked-by: Joerg Roedel  [iommu]
Acked-by: Fabien Dessenne  [bdisp]
Reviewed-by: Marek Szyprowski  [vb2-core]
Acked-by: David Vrabel  [xen]
Acked-by: Konrad Rzeszutek Wilk  [xen swiotlb]
Acked-by: Joerg Roedel  [iommu]
Acked-by: Richard Kuo  [hexagon]
Acked-by: Geert Uytterhoeven  [m68k]
Acked-by: Gerald Schaefer  [s390]
Acked-by: Bjorn Andersson 
Acked-by: Hans-Christian Noren Egtvedt  [avr32]
Acked-by: Vineet Gupta  [arc]
Acked-by: Robin Murphy  [arm64 and dma-iommu]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds