Pull asm-generic updates from Arnd Bergmann:
 "There are three sets of updates for 5.18 in the asm-generic tree:

   - The set_fs()/get_fs() infrastructure gets removed for good.

     This was already gone from all major architectures, but now we can
     finally remove it everywhere, which loses some particularly tricky
     and error-prone code. There is a small merge conflict against a
     parisc cleanup, the solution is to use their new version.

   - The nds32 architecture ends its tenure in the Linux kernel.

     The hardware is still used and the code is in reasonable shape, but
     the mainline port is not actively maintained any more, as all
     remaining users are thought to run vendor kernels that would never
     be updated to a future release.

   - A series from Masahiro Yamada cleans up some of the uapi header
     files to pass the compile-time checks"

* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
  nds32: Remove the architecture
  uaccess: remove CONFIG_SET_FS
  ia64: remove CONFIG_SET_FS support
  sh: remove CONFIG_SET_FS support
  sparc64: remove CONFIG_SET_FS support
  lib/test_lockup: fix kernel pointer check for separate address spaces
  uaccess: generalize access_ok()
  uaccess: fix type mismatch warnings from access_ok()
  arm64: simplify access_ok()
  m68k: fix access_ok for coldfire
  MIPS: use simpler access_ok()
  MIPS: Handle address errors for accesses above CPU max virtual user address
  uaccess: add generic __{get,put}_kernel_nofault
  nios2: drop access_ok() check from __put_user()
  x86: use more conventional access_ok() definition
  x86: remove __range_not_ok()
  sparc64: add __{get,put}_kernel_nofault()
  nds32: fix access_ok() checks in get/put_user
  uaccess: fix nios2 and microblaze get_user_8()
  sparc64: fix building assembly files
  ...

We need to use this function in common code, so define it for
architectures and/or configrations that miss it.  The result of
pmd_pfn() will only be used if TRANSPARENT_HUGEPAGE is enabled,
but a function or macro called pmd_pfn() must be defined, even
on machines with two level page tables.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

There are no remaining callers of set_fs(), so CONFIG_SET_FS
can be removed globally, along with the thread_info field and
any references to it.

This turns access_ok() into a cheaper check against TASK_SIZE_MAX.

As CONFIG_SET_FS is now gone, drop all remaining references to
set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel().

Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes
Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic]
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There are many different ways that access_ok() is defined across
architectures, but in the end, they all just compare against the
user_addr_max() value or they accept anything.

Provide one definition that works for most architectures, checking
against TASK_SIZE_MAX for user processes or skipping the check inside
of uaccess_kernel() sections.

For architectures without CONFIG_SET_FS(), this should be the fastest
check, as it comes down to a single comparison of a pointer against a
compile-time constant, while the architecture specific versions tend to
do something more complex for historic reasons or get something wrong.

Type checking for __user annotations is handled inconsistently across
architectures, but this is easily simplified as well by using an inline
function that takes a 'const void __user *' argument. A handful of
callers need an extra __user annotation for this.

Some architectures had trick to use 33-bit or 65-bit arithmetic on the
addresses to calculate the overflow, however this simpler version uses
fewer registers, which means it can produce better object code in the
end despite needing a second (statically predicted) branch.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64, asm-generic]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Unlike other architectures, the nios2 version of __put_user() has an
extra check for access_ok(), preventing it from being used to implement
__put_kernel_nofault().

Split up put_user() along the same lines as __get_user()/get_user()

Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

These two architectures implement 8-byte get_user() through
a memcpy() into a four-byte variable, which won't fit.

Use a temporary 64-bit variable instead here, and use a double
cast the way that risc-v and openrisc do to avoid compile-time
warnings.

Fixes: 6a090e97972d ("arch/microblaze: support get_user() of size 8 bytes")
Fixes: 5ccc6af5e88e ("nios2: Memory management")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Many architectures do not include asm-generic/cacheflush.h, so turn
the includes on their head and add linux/cacheflush.h which includes
asm/cacheflush.h.

Move the flush_dcache_folio() declaration from asm-generic/cacheflush.h
to linux/cacheflush.h and change linux/highmem.h to include
linux/cacheflush.h instead of asm/cacheflush.h so that all necessary
places will see flush_dcache_folio().

More functions should have their default implementations moved in the
future, but those are for follow-on patches.  This fixes csky, sparc and
sparc64 which were missed in the commit which added flush_dcache_folio().

Fixes: 08b0b0059bf1 ("mm: Add flush_dcache_folio()")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

Pull asm-generic cleanup from Arnd Bergmann:
 "This is a single cleanup from Peter Collingbourne, removing some dead
  code"

* tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: remove unused function syscall_set_arguments()

Pull scheduler updates from Thomas Gleixner:

 - Revert the printk format based wchan() symbol resolution as it can
   leak the raw value in case that the symbol is not resolvable.

 - Make wchan() more robust and work with all kind of unwinders by
   enforcing that the task stays blocked while unwinding is in progress.

 - Prevent sched_fork() from accessing an invalid sched_task_group

 - Improve asymmetric packing logic

 - Extend scheduler statistics to RT and DL scheduling classes and add
   statistics for bandwith burst to the SCHED_FAIR class.

 - Properly account SCHED_IDLE entities

 - Prevent a potential deadlock when initial priority is assigned to a
   newly created kthread. A recent change to plug a race between cpuset
   and __sched_setscheduler() introduced a new lock dependency which is
   now triggered. Break the lock dependency chain by moving the priority
   assignment to the thread function.

 - Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.

 - Improve idle balancing in general and especially for NOHZ enabled
   systems.

 - Provide proper interfaces for live patching so it does not have to
   fiddle with scheduler internals.

 - Add cluster aware scheduling support.

 - A small set of tweaks for RT (irqwork, wait_task_inactive(), various
   scheduler options and delaying mmdrop)

 - The usual small tweaks and improvements all over the place

* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
  sched/fair: Cleanup newidle_balance
  sched/fair: Remove sysctl_sched_migration_cost condition
  sched/fair: Wait before decaying max_newidle_lb_cost
  sched/fair: Skip update_blocked_averages if we are defering load balance
  sched/fair: Account update_blocked_averages in newidle_balance cost
  x86: Fix __get_wchan() for !STACKTRACE
  sched,x86: Fix L2 cache mask
  sched/core: Remove rq_relock()
  sched: Improve wake_up_all_idle_cpus() take #2
  irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
  irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
  irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
  sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
  sched: Add cluster scheduler level for x86
  sched: Add cluster scheduler level in core and related Kconfig for ARM64
  topology: Represent clusters of CPUs within a die
  sched: Disable -Wunused-but-set-variable
  sched: Add wrapper for get_wchan() to keep task blocked
  x86: Fix get_wchan() to support the ORC unwinder
  proc: Use task_is_running() for wchan in /proc/$pid/stat
  ...

Pull memory folios from Matthew Wilcox:
 "Add memory folios, a new type to represent either order-0 pages or the
  head page of a compound page. This should be enough infrastructure to
  support filesystems converting from pages to folios.

  The point of all this churn is to allow filesystems and the page cache
  to manage memory in larger chunks than PAGE_SIZE. The original plan
  was to use compound pages like THP does, but I ran into problems with
  some functions expecting only a head page while others expect the
  precise page containing a particular byte.

  The folio type allows a function to declare that it's expecting only a
  head page. Almost incidentally, this allows us to remove various calls
  to VM_BUG_ON(PageTail(page)) and compound_head().

  This converts just parts of the core MM and the page cache. For 5.17,
  we intend to convert various filesystems (XFS and AFS are ready; other
  filesystems may make it) and also convert more of the MM and page
  cache to folios. For 5.18, multi-page folios should be ready.

  The multi-page folios offer some improvement to some workloads. The
  80% win is real, but appears to be an artificial benchmark (postgres
  startup, which isn't a serious workload). Real workloads (eg building
  the kernel, running postgres in a steady state, etc) seem to benefit
  between 0-10%. I haven't heard of any performance losses as a result
  of this series. Nobody has done any serious performance tuning; I
  imagine that tweaking the readahead algorithm could provide some more
  interesting wins. There are also other places where we could choose to
  create large folios and currently do not, such as writes that are
  larger than PAGE_SIZE.

  I'd like to thank all my reviewers who've offered review/ack tags:
  Christoph Hellwig, David Howells, Jan Kara, Jeff Layton, Johannes
  Weiner, Kirill A. Shutemov, Michal Hocko, Mike Rapoport, Vlastimil
  Babka, William Kucharski, Yu Zhao and Zi Yan.

  I'd also like to thank those who gave feedback I incorporated but
  haven't offered up review tags for this part of the series: Nick
  Piggin, Mel Gorman, Ming Lei, Darrick Wong, Ted Ts'o, John Hubbard,
  Hugh Dickins, and probably a few others who I forget"

* tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache: (90 commits)
  mm/writeback: Add folio_write_one
  mm/filemap: Add FGP_STABLE
  mm/filemap: Add filemap_get_folio
  mm/filemap: Convert mapping_get_entry to return a folio
  mm/filemap: Add filemap_add_folio()
  mm/filemap: Add filemap_alloc_folio
  mm/page_alloc: Add folio allocation functions
  mm/lru: Add folio_add_lru()
  mm/lru: Convert __pagevec_lru_add_fn to take a folio
  mm: Add folio_evictable()
  mm/workingset: Convert workingset_refault() to take a folio
  mm/filemap: Add readahead_folio()
  mm/filemap: Add folio_mkwrite_check_truncate()
  mm/filemap: Add i_blocks_per_folio()
  mm/writeback: Add folio_redirty_for_writepage()
  mm/writeback: Add folio_account_redirty()
  mm/writeback: Add folio_clear_dirty_for_io()
  mm/writeback: Add folio_cancel_dirty()
  mm/writeback: Add folio_account_cleaned()
  mm/writeback: Add filemap_dirty_folio()
  ...