linux-toradex.git/arch/openrisc/Kconfig, branch master

openrisc: Add jump label support

2025-09-11T10:27:59+00:00

Supported a complete jump_label implementation based on the ARM64 and
RV64 version and add the CONFIG_JUMP_LABEL=y to the defconfig.

Testing was conducted using a dedicated test module jump-label-test,
provided in the link below. For detailed steps, please refer to the
README also at the provided link.

Link: https://github.com/ChenMiaoi/GSoC-2025-Final-Report/tree/main/tests/jump-label-test

Test Environment:
  - Hardware: QEMU emulated OR1K
  - Kernel Version: 6.17.0-rc3-dirty
  - Configs: CONFIG_MODULES=y,CONFIG_MODULE_UNLOAD=y
  - Toolchain: or1k-none-linux-musl-gcc 15.1.0

Test Results:
$ insmod jump_label_test.ko
[   32.590000] Jump label performance test module loaded
[   35.250000] Normal branch time: 1241327150 ns (124 ns per iteration)
[   35.250000] Jump label (false) time: 706422700 ns (70 ns per iteration)
[   35.250000] Jump label (true) time: 708913450 ns (70 ns per iteration)
$ rmmod jump_label_test.ko
[   72.210000] Jump label test module unloaded

The results show approximately 43% improvement in branch performance
when using jump labels compared to traditional branches.

Link: https://lore.kernel.org/openrisc/aLsZ9S3X0OpKy1RM@antec/T/#u
Signed-off-by: chenmiao 
Signed-off-by: Stafford Horne

openrisc: Add support for restartable sequences

2025-01-14T17:17:16+00:00

Implement support for restartable sequences on OpenRISC by doing:
 - Select HAVE_RSEQ in Kconfig
 - Call rseq_syscall() on return to userspace when CONFIG_DEBUG_RSEQ
   is enabled.
 - Call rseq_signal_deliver() to fixup the pre-signal stack frame when a
   signal is delivered on top of a restartable sequence critical section

Cc: Michael Jeanson 
Signed-off-by: Stafford Horne

openrisc: Add HAVE_REGS_AND_STACK_ACCESS_API support

2025-01-14T17:17:15+00:00

Support for HAVE_REGS_AND_STACK_ACCESS_API needed for restartable
sequences.

The implementation has been copied from riscv and tested with the
restartable sequences self tests.

Note, pt-regs members are 'long' on openrisc which require casts for the
api, someday we should try to update these to be 'unsigned long' as
that's what they really are.

Signed-off-by: Michael Jeanson 
[stafford: Updated commit message]
Signed-off-by: Stafford Horne

openrisc: migrate to the generic rule for built-in DTB

2025-01-14T17:17:15+00:00

Commit 654102df2ac2 ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.

Select GENERIC_BUILTIN_DTB to use the generic rule.

To keep consistency across architectures, this commit also renames
CONFIG_OPENRISC_BUILTIN_DTB_NAME to CONFIG_BUILTIN_DTB_NAME.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Stafford Horne

openrisc: Implement fixmap to fix earlycon

2024-10-15T17:36:15+00:00

With commit 53c98e35dcbc ("openrisc: mm: remove unneeded early ioremap
code") it was commented that early ioremap was not used in OpenRISC.  I
acked this but was wrong, earlycon was using it.  Earlycon setup now
fails with the below trace:

    Kernel command line: earlycon
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 0 at mm/ioremap.c:23
    generic_ioremap_prot+0x118/0x130
    Modules linked in:
    CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted
    6.11.0-rc5-00001-gce02fd891c38-dirty #141
    Call trace:
    [<(ptrval)>] dump_stack_lvl+0x7c/0x9c
    [<(ptrval)>] dump_stack+0x1c/0x2c
    [<(ptrval)>] __warn+0xb4/0x108
    [<(ptrval)>] ? generic_ioremap_prot+0x118/0x130
    [<(ptrval)>] warn_slowpath_fmt+0x60/0x98
    [<(ptrval)>] generic_ioremap_prot+0x118/0x130
    [<(ptrval)>] ioremap_prot+0x20/0x30
    [<(ptrval)>] of_setup_earlycon+0xd4/0x2e0
    [<(ptrval)>] early_init_dt_scan_chosen_stdout+0x18c/0x1c8
    [<(ptrval)>] param_setup_earlycon+0x3c/0x60
    [<(ptrval)>] do_early_param+0xb0/0x118
    [<(ptrval)>] parse_args+0x184/0x4b8
    [<(ptrval)>] ? start_kernel+0x0/0x78c
    [<(ptrval)>] parse_early_options+0x40/0x50
    [<(ptrval)>] ? do_early_param+0x0/0x118
    [<(ptrval)>] parse_early_param+0x48/0x68
    [<(ptrval)>] ? start_kernel+0x318/0x78c
    [<(ptrval)>] ? start_kernel+0x0/0x78c
    ---[ end trace 0000000000000000 ]---

To fix this we could either implement early_ioremap again or implement
fixmap.  In this patch we choose the later option of implementing basic
fixmap support.

While fixing this we also remove the old FIX_IOREMAP slots that were
used by early ioremap code.  That code was also removed by commit
53c98e35dcbc ("openrisc: mm: remove unneeded early ioremap code") but
these definitions were not cleaned up.

Fixes: 53c98e35dcbc ("openrisc: mm: remove unneeded early ioremap code")
Signed-off-by: Stafford Horne

openrisc: Add FPU config

2024-04-15T14:20:39+00:00

Allow disabling FPU related code sequences to save space.

Signed-off-by: Stafford Horne

arch: define CONFIG_PAGE_SIZE_*KB on all architectures

2024-03-06T18:29:09+00:00

Most architectures only support a single hardcoded page size. In order
to ensure that each one of these sets the corresponding Kconfig symbols,
change over the PAGE_SHIFT definition to the common one and allow
only the hardware page size to be selected.

Acked-by: Guo Ren 
Acked-by: Heiko Carstens 
Acked-by: Stafford Horne 
Acked-by: Johannes Berg 
Acked-by: Geert Uytterhoeven 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Arnd Bergmann

openrisc: mm: convert to GENERIC_IOREMAP

2023-08-18T17:12:34+00:00

By taking GENERIC_IOREMAP method, the generic generic_ioremap_prot(),
generic_iounmap(), and their generic wrapper ioremap_prot(), ioremap() and
iounmap() are all visible and available to arch.  Arch needs to provide
wrapper functions to override the generic versions if there's arch
specific handling in its ioremap_prot(), ioremap() or iounmap().  This
change will simplify implementation by removing duplicated code with
generic_ioremap_prot() and generic_iounmap(), and has the equivalent
functioality as before.

For openrisc, the current ioremap() and iounmap() are the same as generic
version.  After taking GENERIC_IOREMAP way, the old ioremap() and
iounmap() can be completely removed.

Link: https://lkml.kernel.org/r/20230706154520.11257-10-bhe@redhat.com
Signed-off-by: Baoquan He 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Mike Rapoport (IBM) 
Cc: Stafford Horne 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Alexander Gordeev 
Cc: Arnd Bergmann 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Christian Borntraeger 
Cc: Christophe Leroy 
Cc: Chris Zankel 
Cc: David Laight 
Cc: Geert Uytterhoeven 
Cc: Gerald Schaefer 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: "James E.J. Bottomley" 
Cc: John Paul Adrian Glaubitz 
Cc: Kefeng Wang 
Cc: Matthew Wilcox 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Nathan Chancellor 
Cc: Nicholas Piggin 
Cc: Niklas Schnelle 
Cc: Rich Felker 
Cc: Sven Schnelle 
Cc: Vasily Gorbik 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton

openrisc: Add pci bus support

2022-07-29T20:50:15+00:00

This patch adds required definitions to allow for PCI buses on OpenRISC.
This is being tested on the OpenRISC QEMU virt platform which is in
development.

OpenRISC does not have IO ports so we keep the definition of
IO_SPACE_LIMIT and PIO_RESERVED to be 0.

Note, since commit 66bcd06099bb ("parport_pc: Also enable driver for PCI
systems") all platforms that support PCI also need to support parallel
port.  We add a generic header to support compiling parallel port
drivers, though they generally will not work as they require IO ports.

Signed-off-by: Stafford Horne

Merge tag 'for-linus' of https://github.com/openrisc/linux

2022-05-27T00:27:49+00:00

Pull OpenRISC updates from Stafford Horne:

 - A few sparse warning fixups and other cleanups I noticed when working
   on a recent TLB bug found on a new OpenRISC core bring up.

 - A few fixup's from me and Jason A Donenfeld to help shutdown OpenRISC
   platforms when running CI tests

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: Allow power off handler overriding
  openrisc: Remove unused IMMU tlb workardound
  openrisc/fault: Fix symbol scope warnings
  openrisc/delay: Add include to fix symbol not declared warning
  openrisc/time: Fix symbol scope warnings
  openrisc/traps: Declare unhandled_exception for asmlinkage
  openrisc/traps: Remove die_if_kernel function
  openrisc/traps: Declare file scope symbols as static
  openrisc: Update litex defconfig to support glibc userland
  openrisc: Pretty print show_registers memory dumps
  openrisc: Add syscall details to emergency syscall debugging
  openrisc: Add support for liteuart emergency printing
  openrisc: Cleanup emergency print handling
  openrisc: Add gcc machine instruction flag configuration
  openrisc: define nop command for simulator reboot
  openrisc: remove bogus nops and shutdowns
  openrisc: fix typos in comments