linux-toradex.git/arch/openrisc/kernel/traps.c, branch v5.18

exit: Add and use make_task_dead.

2021-12-13T18:04:45+00:00

There are two big uses of do_exit.  The first is it's design use to be
the guts of the exit(2) system call.  The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.

Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure.  In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.

Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.

As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.

Signed-off-by: "Eric W. Biederman"

exit: Remove calls of do_exit after noreturn versions of die

2021-10-20T18:09:47+00:00

On nds32, openrisc, s390, sh, and xtensa the function die never
returns.  Mark die __noreturn so that no one expects die to return.
Remove the do_exit calls after die as they will never be reached.

Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Cc: openrisc@lists.librecores.org
Cc: Nick Hu 
Cc: Greentime Hu 
Cc: Vincent Chen 
Cc: Heiko Carstens 
Cc: Vasily Gorbik 
Cc: Christian Borntraeger 
Cc: linux-s390@vger.kernel.org
Cc: Yoshinori Sato 
Cc: Rich Felker 
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: Chris Zankel 
Cc: Max Filippov 
Fixes: 2.3.16
Fixes: 2.3.99-pre8
Fixes: 3f65ce4d141e ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 5")
Fixes: 664eec400bf8 ("nds32: MMU fault handling and page table management")
Fixes: 61e85e367535 ("OpenRISC: Memory management")
Link: https://lkml.kernel.org/r/20211020174406.17889-2-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman

trap: cleanup trap_init()

2021-09-08T18:50:27+00:00

There are some empty trap_init() definitions in different ARCHs, Introduce
a new weak trap_init() function to clean them up.

Link: https://lkml.kernel.org/r/20210812123602.76356-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang 
Acked-by: Russell King (Oracle) 	[arm32]
Acked-by: Vineet Gupta						[arc]
Acked-by: Michael Ellerman 			[powerpc]
Cc: Yoshinori Sato 
Cc: Ley Foon Tan 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Cc: James E.J. Bottomley 
Cc: Helge Deller 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Paul Walmsley 
Cc: Jeff Dike 
Cc: Richard Weinberger 
Cc: Anton Ivanov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

openrisc: fix trap for debugger breakpoint signalling

2020-11-11T21:32:20+00:00

I have been working on getting native Linux GDB support working for the
OpenRISC port.  The trap signal handler here was wrong in a few ways.
During trap handling address (from the EEAR register) is not set by the
CPU, so it is not correct to use here.  We want to use trap as a
break-point so use TRAP_BRKPT.  Adding 4 to the pc was incorrect and
causing GDB to think the breakpoint was not hit.

Fixing these allows GDB to work now.

Signed-off-by: Stafford Horne

mm: don't include asm/pgtable.h if linux/mm.h is already included

2020-06-09T16:39:13+00:00

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes  to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include 
in the files that include .

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include ") ; do
		sed -i -e '/include / d' $f
	done

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Mike Rapoport 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds

kernel: rename show_stack_loglvl() => show_stack()

2020-06-09T16:39:13+00:00

Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com
Signed-off-by: Linus Torvalds

openrisc: add show_stack_loglvl()

2020-06-09T16:39:11+00:00

Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Introduce show_stack_loglvl(), that eventually will substitute
show_stack().

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Cc: Jonas Bonn 
Cc: Stafford Horne 
Cc: Stefan Kristiansson 
Link: http://lkml.kernel.org/r/20200418201944.482088-25-dima@arista.com
Signed-off-by: Linus Torvalds

openrisc: Remove obsolete show_trace_task function

2020-03-18T13:10:44+00:00

The function show_trace_task() was removed during linux 2.5 development
and replaced with show_stack().  This was never impemented for openrisc
but must have got in via copying from another architecture.  Just remove
it.

Signed-off-by: Stafford Horne

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2019-07-09T04:48:15+00:00

Pull force_sig() argument change from Eric Biederman:
 "A source of error over the years has been that force_sig has taken a
  task parameter when it is only safe to use force_sig with the current
  task.

  The force_sig function is built for delivering synchronous signals
  such as SIGSEGV where the userspace application caused a synchronous
  fault (such as a page fault) and the kernel responded with a signal.

  Because the name force_sig does not make this clear, and because the
  force_sig takes a task parameter the function force_sig has been
  abused for sending other kinds of signals over the years. Slowly those
  have been fixed when the oopses have been tracked down.

  This set of changes fixes the remaining abusers of force_sig and
  carefully rips out the task parameter from force_sig and friends
  making this kind of error almost impossible in the future"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
  signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
  signal: Remove the signal number and task parameters from force_sig_info
  signal: Factor force_sig_info_to_task out of force_sig_info
  signal: Generate the siginfo in force_sig
  signal: Move the computation of force into send_signal and correct it.
  signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
  signal: Remove the task parameter from force_sig_fault
  signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
  signal: Explicitly call force_sig_fault on current
  signal/unicore32: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from ptrace_break
  signal/nds32: Remove tsk parameter from send_sigtrap
  signal/riscv: Remove tsk parameter from do_trap
  signal/sh: Remove tsk parameter from force_sig_info_fault
  signal/um: Remove task parameter from send_sigtrap
  signal/x86: Remove task parameter from send_sigtrap
  signal: Remove task parameter from force_sig_mceerr
  signal: Remove task parameter from force_sig
  signal: Remove task parameter from force_sigsegv
  ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman