linux-toradex.git/arch/parisc, branch v4.9.44

parisc: Handle vma's whose context is not current in flush_cache_range

2017-08-11T15:49:27+00:00

commit 13d57093c141db2036364d6be35e394fc5b64728 upstream.

In testing James' patch to drivers/parisc/pdc_stable.c, I hit the BUG
statement in flush_cache_range() during a system shutdown:

kernel BUG at arch/parisc/kernel/cache.c:595!
CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1
Workqueue: events free_ioctx

 IAOQ[0]: flush_cache_range+0x144/0x148
 IAOQ[1]: flush_cache_page+0x0/0x1a8
 RP(r2): flush_cache_range+0xec/0x148
Backtrace:
 [<00000000402910ac>] unmap_page_range+0x84/0x880
 [<00000000402918f4>] unmap_single_vma+0x4c/0x60
 [<0000000040291a18>] zap_page_range_single+0x110/0x160
 [<0000000040291c34>] unmap_mapping_range+0x174/0x1a8
 [<000000004026ccd8>] truncate_pagecache+0x50/0xa8
 [<000000004026cd84>] truncate_setsize+0x54/0x70
 [<000000004033d534>] put_aio_ring_file+0x44/0xb0
 [<000000004033d5d8>] aio_free_ring+0x38/0x140
 [<000000004033d714>] free_ioctx+0x34/0xa8
 [<00000000401b0028>] process_one_work+0x1b8/0x4d0
 [<00000000401b04f4>] worker_thread+0x1b4/0x648
 [<00000000401b9128>] kthread+0x1b0/0x208
 [<0000000040150020>] end_fault_vector+0x20/0x28
 [<0000000040639518>] nf_ip_reroute+0x50/0xa8
 [<0000000040638ed0>] nf_ip_route+0x10/0x78
 [<0000000040638c90>] xfrm4_mode_tunnel_input+0x180/0x1f8

CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1
Workqueue: events free_ioctx
Backtrace:
 [<0000000040163bf0>] show_stack+0x20/0x38
 [<0000000040688480>] dump_stack+0xa8/0x120
 [<0000000040163dc4>] die_if_kernel+0x19c/0x2b0
 [<0000000040164d0c>] handle_interruption+0xa24/0xa48

This patch modifies flush_cache_range() to handle non current contexts.
In as much as this occurs infrequently, the simplest approach is to
flush the entire cache when this happens.

Signed-off-by: John David Anglin 
Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

parisc: Suspend lockup detectors before system halt

2017-08-07T01:59:40+00:00

commit 56188832a50f09998cb570ba3771a1d25c193c0e upstream.

Some machines can't power off the machine, so disable the lockup detectors to
avoid this watchdog BUG to show up every few seconds:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [systemd-shutdow:1]

Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

parisc: Extend disabled preemption in copy_user_page

2017-08-07T01:59:40+00:00

commit 56008c04ebc099940021b714da2d7779117cf6a7 upstream.

It's always bothered me that we only disable preemption in
copy_user_page around the call to flush_dcache_page_asm.
This patch extends this to after the copy.

Signed-off-by: John David Anglin 
Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

parisc: Prevent TLB speculation on flushed pages on CPUs that only support equivalent aliases

2017-08-07T01:59:39+00:00

commit ae7a609c34b6fb12328c553b5f9aab26ae74a28e upstream.

Helge noticed that we flush the TLB page in flush_cache_page but not in
flush_cache_range or flush_cache_mm.

For a long time, we have had random segmentation faults building
packages on machines with PA8800/8900 processors.  These machines only
support equivalent aliases.  We don't see these faults on machines that
don't require strict coherency.  So, it appears TLB speculation
sometimes leads to cache corruption on machines that require coherency.

This patch adds TLB flushes to flush_cache_range and flush_cache_mm when
coherency is required.  We only flush the TLB in flush_cache_page when
coherency is required.

The patch also optimizes flush_cache_range.  It turns out we always have
the right context to use flush_user_dcache_range_asm and
flush_user_icache_range_asm.

The patch has been tested for some time on rp3440, rp3410 and A500-44.
It's been boot tested on c8000.  No random segmentation faults were
observed during testing.

Signed-off-by: John David Anglin 
Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

parisc/mm: Ensure IRQs are off in switch_mm()

2017-07-21T05:42:20+00:00

commit 649aa24254e85bf6bd7807dd372d083707852b1f upstream.

This is because of commit f98db6013c55 ("sched/core: Add switch_mm_irqs_off()
and use it in the scheduler") in which switch_mm_irqs_off() is called by the
scheduler, vs switch_mm() which is used by use_mm().

This patch lets the parisc code mirror the x86 and powerpc code, ie. it
disables interrupts in switch_mm(), and optimises the scheduler case by
defining switch_mm_irqs_off().

Signed-off-by: Helge Deller 
Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs

2017-07-21T05:42:20+00:00

commit 33f9e02495d15a061f0c94ef46f5103a2d0c20f3 upstream.

Enabling parport pc driver on a B2600 (and probably other 64bit PARISC
systems) produced following BUG:

CPU: 0 PID: 1 Comm: swapper Not tainted 4.12.0-rc5-30198-g1132d5e #156
task: 000000009e050000 task.stack: 000000009e04c000

     YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001101111111100001111 Not tainted
r00-03  000000ff0806ff0f 000000009e04c990 0000000040871b78 000000009e04cac0
r04-07  0000000040c14de0 ffffffffffffffff 000000009e07f098 000000009d82d200
r08-11  000000009d82d210 0000000000000378 0000000000000000 0000000040c345e0
r12-15  0000000000000005 0000000040c345e0 0000000000000000 0000000040c9d5e0
r16-19  0000000040c345e0 00000000f00001c4 00000000f00001bc 0000000000000061
r20-23  000000009e04ce28 0000000000000010 0000000000000010 0000000040b89e40
r24-27  0000000000000003 0000000000ffffff 000000009d82d210 0000000040c14de0
r28-31  0000000000000000 000000009e04ca90 000000009e04cb40 0000000000000000
sr00-03  0000000000000000 0000000000000000 0000000000000000 0000000000000000
sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000

IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000404aece0 00000000404aece4
 IIR: 03ffe01f    ISR: 0000000010340000  IOR: 000001781304cac8
 CPU:        0   CR30: 000000009e04c000 CR31: 00000000e2976de2
 ORIG_R28: 0000000000000200
 IAOQ[0]: sba_dma_supported+0x80/0xd0
 IAOQ[1]: sba_dma_supported+0x84/0xd0
 RP(r2): parport_pc_probe_port+0x178/0x1200

Cause is a call to dma_coerce_mask_and_coherenet in parport_pc_probe_port,
which PARISC DMA API doesn't handle very nicely. This commit gives back
DMA_ERROR_CODE for DMA API calls, if device isn't capable of DMA
transaction.

Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

parisc: use compat_sys_keyctl()

2017-07-21T05:42:20+00:00

commit b0f94efd5aa8daa8a07d7601714c2573266cd4c9 upstream.

Architectures with a compat syscall table must put compat_sys_keyctl()
in it, not sys_keyctl().  The parisc architecture was not doing this;
fix it.

Signed-off-by: Eric Biggers 
Acked-by: Helge Deller 
Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

parisc: Report SIGSEGV instead of SIGBUS when running out of stack

2017-07-21T05:42:20+00:00

commit 247462316f85a9e0479445c1a4223950b68ffac1 upstream.

When a process runs out of stack the parisc kernel wrongly faults with SIGBUS
instead of the expected SIGSEGV signal.

This example shows how the kernel faults:
do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000]
trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000

The vma->vm_end value is the first address which does not belong to the vma, so
adjust the check to include vma->vm_end to the range for which to send the
SIGSEGV signal.

This patch unbreaks building the debian libsigsegv package.

Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

mm: larger stack guard gap, between vmas

2017-06-24T05:11:18+00:00

commit 1be7107fbe18eed3e319a6c3e83c78254b693acb upstream.

Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.

This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.

Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.

One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications.  For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).

Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.

Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.

Original-patch-by: Oleg Nesterov 
Original-patch-by: Michal Hocko 
Signed-off-by: Hugh Dickins 
Acked-by: Michal Hocko 
Tested-by: Helge Deller  # parisc
Signed-off-by: Linus Torvalds 
[wt: backport to 4.11: adjust context]
[wt: backport to 4.9: adjust context ; kernel doc was not in admin-guide]
Signed-off-by: Willy Tarreau 
Signed-off-by: Greg Kroah-Hartman

parisc: Fix get_user() for 64-bit value on 32-bit kernel

2017-04-21T07:31:23+00:00

commit 3f795cef0ecdf9bc980dd058d49bdab4b19af1d3 upstream.

This fixes a bug in which the upper 32-bits of a 64-bit value which is
read by get_user() was lost on a 32-bit kernel.
While touching this code, split out pre-loading of %sr2 space register
and clean up code indent.

Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman