Currently, `git status` lists the file as untracked by git, so tell git
to ignore it.

Fixes: aa3bc365ee73 ("powerpc/ps3: Add check for otheros image size")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220214065543.198992-1-pmenzel@molgen.mpg.de

On board rev A, the network interface labels for the switch ports
written on the front panel are different than on rev B and later.

This patch fixes network interface names for the switch ports according
to labels that are written on the front panel of the board rev B.
They start from ETH3 and end at ETH10.

This patch also introduces a separate device tree for rev A.
The main device tree is supposed to cover rev B and later.

Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville Ethernet switch")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220121091447.3412907-1-bigunclemax@gmail.com

The unit-address for the Maxim MAX1237 ADCs on XPedite5200 boards don't
match the value in the "reg" property and cause a DTC warning.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211220134036.683309-1-thierry.reding@gmail.com

T1040RDB has two RTL8211E-VB phys which requires setting
of internal delays for correct work.

Changing the phy-connection-type property to `rgmii-id`
will fix this issue.

Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com

Pull RTC updates from Alexandre Belloni:
 "Two new drivers this cycle and a significant rework of the CMOS driver
  make the bulk of the changes.

  I also carry powerpc changes with the agreement of Michael.

  New drivers:
   - Sunplus SP7021 RTC
   - Nintendo GameCube, Wii and Wii U RTC

  Driver updates:
   - cmos: refactor UIP handling and presence check, fix century
   - rs5c372: offset correction support, report low voltage
   - rv8803: Epson RX8804 support"

* tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
  rtc: sunplus: fix return value in sp_rtc_probe()
  rtc: cmos: Evaluate century appropriate
  rtc: gamecube: Fix an IS_ERR() vs NULL check
  rtc: mc146818-lib: fix signedness bug in mc146818_get_time()
  dt-bindings: rtc: qcom-pm8xxx-rtc: update register numbers
  rtc: pxa: fix null pointer dereference
  rtc: ftrtc010: Use platform_get_irq() to get the interrupt
  rtc: Move variable into switch case statement
  rtc: pcf2127: Fix typo in comment
  dt-bindings: rtc: Add Sunplus RTC json-schema
  rtc: Add driver for RTC in Sunplus SP7021
  rtc: rs5c372: fix incorrect oscillation value on r2221tl
  rtc: rs5c372: add offset correction support
  rtc: cmos: avoid UIP when writing alarm time
  rtc: cmos: avoid UIP when reading alarm time
  rtc: mc146818-lib: refactor mc146818_does_rtc_work
  rtc: mc146818-lib: refactor mc146818_get_time
  rtc: mc146818-lib: extract mc146818_avoid_UIP
  rtc: mc146818-lib: fix RTC presence check
  rtc: Check return value from mc146818_get_time()
  ...

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, bpf.

  Quite a handful of old regression fixes but most of those are
  pre-5.16.

  Current release - regressions:

   - fix memory leaks in the skb free deferral scheme if upper layer
     protocols are used, i.e. in-kernel TCP readers like TLS

  Current release - new code bugs:

   - nf_tables: fix NULL check typo in _clone() functions

   - change the default to y for Vertexcom vendor Kconfig

   - a couple of fixes to incorrect uses of ref tracking

   - two fixes for constifying netdev->dev_addr

  Previous releases - regressions:

   - bpf:
      - various verifier fixes mainly around register offset handling
        when passed to helper functions
      - fix mount source displayed for bpffs (none -> bpffs)

   - bonding:
      - fix extraction of ports for connection hash calculation
      - fix bond_xmit_broadcast return value when some devices are down

   - phy: marvell: add Marvell specific PHY loopback

   - sch_api: don't skip qdisc attach on ingress, prevent ref leak

   - htb: restore minimal packet size handling in rate control

   - sfp: fix high power modules without diagnostic monitoring

   - mscc: ocelot:
      - don't let phylink re-enable TX PAUSE on the NPI port
      - don't dereference NULL pointers with shared tc filters

   - smsc95xx: correct reset handling for LAN9514

   - cpsw: avoid alignment faults by taking NET_IP_ALIGN into account

   - phy: micrel: use kszphy_suspend/_resume for irq aware devices,
     avoid races with the interrupt

  Previous releases - always broken:

   - xdp: check prog type before updating BPF link

   - smc: resolve various races around abnormal connection termination

   - sit: allow encapsulated IPv6 traffic to be delivered locally

   - axienet: fix init/reset handling, add missing barriers, read the
     right status words, stop queues correctly

   - add missing dev_put() in sock_timestamping_bind_phc()

  Misc:

   - ipv4: prevent accidentally passing RTO_ONLINK to
     ip_route_output_key_hash() by sanitizing flags

   - ipv4: avoid quadratic behavior in netns dismantle

   - stmmac: dwmac-oxnas: add support for OX810SE

   - fsl: xgmac_mdio: add workaround for erratum A-009885"

* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
  ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
  ipv4: avoid quadratic behavior in netns dismantle
  net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
  powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
  dt-bindings: net: Document fsl,erratum-a009885
  net/fsl: xgmac_mdio: Add workaround for erratum A-009885
  net: mscc: ocelot: fix using match before it is set
  net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
  net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
  nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
  net: axienet: increase default TX ring size to 128
  net: axienet: fix for TX busy handling
  net: axienet: fix number of TX ring slots for available check
  net: axienet: Fix TX ring slot available check
  net: axienet: limit minimum TX ring size
  net: axienet: add missing memory barriers
  net: axienet: reset core on initialization prior to MDIO access
  net: axienet: Wait for PhyRstCmplt after core reset
  net: axienet: increase reset timeout
  bpf, selftests: Add ringbuf memory type confusion test
  ...

This block is used in (at least) T1024 and T1040, including their
variants like T1023 etc.

Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull Kbuild updates from Masahiro Yamada:

 - Add new kconfig target 'make mod2noconfig', which will be useful to
   speed up the build and test iteration.

 - Raise the minimum supported version of LLVM to 11.0.0

 - Refactor certs/Makefile

 - Change the format of include/config/auto.conf to stop double-quoting
   string type CONFIG options.

 - Fix ARCH=sh builds in dash

 - Separate compression macros for general purposes (cmd_bzip2 etc.) and
   the ones for decompressors (cmd_bzip2_with_size etc.)

 - Misc Makefile cleanups

* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: add cmd_file_size
  arch: decompressor: remove useless vmlinux.bin.all-y
  kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
  kbuild: drop $(size_append) from cmd_zstd
  sh: rename suffix-y to suffix_y
  doc: kbuild: fix default in `imply` table
  microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
  certs: move scripts/extract-cert to certs/
  kbuild: do not quote string values in include/config/auto.conf
  kbuild: do not include include/config/auto.conf from shell scripts
  certs: simplify $(srctree)/ handling and remove config_filename macro
  kbuild: stop using config_filename in scripts/Makefile.modsign
  certs: remove misleading comments about GCC PR
  certs: refactor file cleaning
  certs: remove unneeded -I$(srctree) option for system_certificates.o
  certs: unify duplicated cmd_extract_certs and improve the log
  certs: use $< and $@ to simplify the key generation rule
  kbuild: remove headers_check stub
  kbuild: move headers_check.pl to usr/include/
  certs: use if_changed to re-generate the key when the key type is changed
  ...

Pull powerpc updates from Michael Ellerman:

 - Optimise radix KVM guest entry/exit by 2x on Power9/Power10.

 - Allow firmware to tell us whether to disable the entry and uaccess
   flushes on Power10 or later CPUs.

 - Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.

 - Several fixes and improvements to our hard lockup watchdog.

 - Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.

 - Allow building the 64-bit Book3S kernel without hash MMU support, ie.
   Radix only.

 - Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).

 - Add new encodings for perf_mem_data_src.mem_hops field, and use them
   on Power10.

 - A series of small performance improvements to 64-bit interrupt entry.

 - Several commits fixing issues when building with the clang integrated
   assembler.

 - Many other small features and fixes.

Thanks to Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell,
Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Yang, Erhard
Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren, Hari Bathini, Jason
Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour,
Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh
Kamboju, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child,
Oliver O'Halloran, Peiwei Hu, Randy Dunlap, Ravi Bangoria, Rob Herring,
Russell Currey, Sachin Sant, Sean Christopherson, Segher Boessenkool,
Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang wangx, and Yang
Guang.

* tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (240 commits)
  powerpc/xmon: Dump XIVE information for online-only processors.
  powerpc/opal: use default_groups in kobj_type
  powerpc/cacheinfo: use default_groups in kobj_type
  powerpc/sched: Remove unused TASK_SIZE_OF
  powerpc/xive: Add missing null check after calling kmalloc
  powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" API
  selftests/powerpc: Add a test of sigreturning to an unaligned address
  powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings
  powerpc/64s: Mask NIP before checking against SRR0
  powerpc/perf: Fix spelling of "its"
  powerpc/32: Fix boot failure with GCC latent entropy plugin
  powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftests
  powerpc/code-patching: Move code patching selftests in its own file
  powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.h
  powerpc/code-patching: Move patch_exception() outside code-patching.c
  powerpc/code-patching: Use test_trampoline for prefixed patch test
  powerpc/code-patching: Fix patch_branch() return on out-of-range failure
  powerpc/code-patching: Reorganise do_patch_instruction() to ease error handling
  powerpc/code-patching: Fix unmap_patch_area() error handling
  powerpc/code-patching: Fix error handling in do_patch_instruction()
  ...

The previous commit fixed up all shell scripts to not include
include/config/auto.conf.

Now that include/config/auto.conf is only included by Makefiles,
we can change it into a more Make-friendly form.

Previously, Kconfig output string values enclosed with double-quotes
(both in the .config and include/config/auto.conf):

    CONFIG_X="foo bar"

Unlike shell, Make handles double-quotes (and single-quotes as well)
verbatim. We must rip them off when used.

There are some patterns:

  [1] $(patsubst "%",%,$(CONFIG_X))
  [2] $(CONFIG_X:"%"=%)
  [3] $(subst ",,$(CONFIG_X))
  [4] $(shell echo $(CONFIG_X))

These are not only ugly, but also fragile.

[1] and [2] do not work if the value contains spaces, like
   CONFIG_X=" foo bar "

[3] does not work correctly if the value contains double-quotes like
   CONFIG_X="foo\"bar"

[4] seems to work better, but has a cost of forking a process.

Anyway, quoted strings were always PITA for our Makefiles.

This commit changes Kconfig to stop quoting in include/config/auto.conf.

These are the string type symbols referenced in Makefiles or scripts:

    ACPI_CUSTOM_DSDT_FILE
    ARC_BUILTIN_DTB_NAME
    ARC_TUNE_MCPU
    BUILTIN_DTB_SOURCE
    CC_IMPLICIT_FALLTHROUGH
    CC_VERSION_TEXT
    CFG80211_EXTRA_REGDB_KEYDIR
    EXTRA_FIRMWARE
    EXTRA_FIRMWARE_DIR
    EXTRA_TARGETS
    H8300_BUILTIN_DTB
    INITRAMFS_SOURCE
    LOCALVERSION
    MODULE_SIG_HASH
    MODULE_SIG_KEY
    NDS32_BUILTIN_DTB
    NIOS2_DTB_SOURCE
    OPENRISC_BUILTIN_DTB
    SOC_CANAAN_K210_DTB_SOURCE
    SYSTEM_BLACKLIST_HASH_LIST
    SYSTEM_REVOCATION_KEYS
    SYSTEM_TRUSTED_KEYS
    TARGET_CPU
    UNUSED_KSYMS_WHITELIST
    XILINX_MICROBLAZE0_FAMILY
    XILINX_MICROBLAZE0_HW_VER
    XTENSA_VARIANT_NAME

I checked them one by one, and fixed up the code where necessary.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>