linux-toradex.git/arch/powerpc/configs/adder875_defconfig, branch master

lib/crc32: remove obsolete CRC32 options from defconfig files

2025-02-09T04:06:30+00:00

Remove all remaining references to CONFIG_CRC32_BIT,
CONFIG_CRC32_SARWATE, CONFIG_CRC32_SLICEBY4, and CONFIG_CRC32_SLICEBY8.
These options no longer exist, now that we've standardized on a single
generic CRC32 implementation.

Acked-by: Ard Biesheuvel 
Link: https://lore.kernel.org/r/20250205000424.75149-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers

printk: Remove redundant CONFIG_BASE_FULL

2024-05-06T15:39:09+00:00

CONFIG_BASE_FULL is equivalent to !CONFIG_BASE_SMALL and is enabled by
default: CONFIG_BASE_SMALL is the special case to take care of.
So, remove CONFIG_BASE_FULL and move the config choice to
CONFIG_BASE_SMALL (which defaults to 'n')

For defconfigs explicitely disabling BASE_FULL, explicitely enable
BASE_SMALL.
For defconfigs explicitely enabling BASE_FULL, drop it as it is the
default.

Signed-off-by: Yoann Congal 
Reviewed-by: Petr Mladek 
Link: https://lore.kernel.org/r/20240505080343.1471198-4-yoann.congal@smile.fr
Signed-off-by: Petr Mladek

powerpc: Restore CONFIG_DEBUG_INFO in defconfigs

2022-06-29T06:58:49+00:00

Commit f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a
choice") broke the selection of CONFIG_DEBUG_INFO by powerpc defconfigs.

It is now necessary to select one of the three DEBUG_INFO_DWARF*
options to get DEBUG_INFO enabled.

Replace DEBUG_INFO=y by DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y in all
defconfigs using the following command:

sed -i s/DEBUG_INFO=y/DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y/g `git grep -l DEBUG_INFO arch/powerpc/configs/`

Fixes: f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy 
Reviewed-by: Kees Cook 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/98a4c2603bf9e4b776e219f5b8541d23aa24e854.1654930308.git.christophe.leroy@csgroup.eu

powerpc/8xx: Drop CONFIG_8xx_COPYBACK option

2020-05-26T12:22:20+00:00

CONFIG_8xx_COPYBACK was there to help disabling copyback cache mode
for debuging hardware. But nobody will design new boards with 8xx now.

All 8xx platforms select it, so make it the default and remove
the option.

Also remove the Mx_RESETVAL values which are pretty useless and hide
the real value while reading code.

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/bcc968cda075516eb76e2f25e09821f582c566b4.1589866984.git.christophe.leroy@csgroup.eu

powerpc: configs: Cleanup old Kconfig options

2020-01-31T10:29:03+00:00

CONFIG_ENABLE_WARN_DEPRECATED is gone since
commit 771c035372a0 ("deprecate the '__deprecated' attribute warnings
entirely and for good").

CONFIG_IOSCHED_DEADLINE and CONFIG_IOSCHED_CFQ are gone since
commit f382fb0bcef4 ("block: remove legacy IO schedulers").

The IOSCHED_DEADLINE was replaced by MQ_IOSCHED_DEADLINE and it will be
now enabled by default (along with MQ_IOSCHED_KYBER).

Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200130195223.3843-1-krzk@kernel.org

powerpc/configs: remove obsolete CONFIG_INET_XFRM_MODE_* and CONFIG_INET6_XFRM_MODE_*

2019-11-13T05:58:06+00:00

These Kconfig options has been removed in commit 4c145dce2601 ("xfrm:
make xfrm modes builtin") So there is no point to keep it in
defconfigs any longer.

Signed-off-by: YueHaibing 
[mpe: Extract from cross arch patch]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20190612071901.21736-1-yuehaibing@huawei.com

powerpc/configs: Remove useless UEVENT_HELPER_PATH

2019-07-03T05:19:36+00:00

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
   CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
   made default to 'n',
2. It is not recommended (help message: "This should not be used today
   [...] creates a high system load") and was kept only for ancient
   userland,
3. Certain userland specifically requests it to be disabled (systemd
   README: "Legacy hotplug slows down the system and confuses udev").

Signed-off-by: Krzysztof Kozlowski 
Acked-by: Geert Uytterhoeven 
Signed-off-by: Michael Ellerman

powerpc/configs: Update for symbol movement only

2017-08-28T12:10:00+00:00

Update defconfigs for symbols that have moved around, without their
value changing.

Signed-off-by: Michael Ellerman

powerpc/configs: Remove old symbols from defconfigs

2016-07-08T12:10:07+00:00

Update defconfigs to remove old symbols and comments referencing old
symbols.

Dropped:

* AVERAGE
* INET_LRO
* EXT3_DEFAULTS_TO_ORDERED
* EXT3_FS_XATTR
* I2O
* INFINIBAND_AMSO1100
* INFINIBAND_EHCA
* IP1000

Replaced:

* BLK_DEV_XIP -> BLK_DEV_RAM_DAX
* CLK_PPC_CORENET -> CLK_QORIQ
* EXT2_FS_XIP -> FS_DAX
* EXT3_FS* -> EXT4_FS*

Signed-off-by: Andrew Donnellan 
Signed-off-by: Michael Ellerman

powerpc: Update all configs using savedefconfig

2015-01-20T07:06:58+00:00

It looks like it's ~4 years since we updated some of these, so do a bulk
update.

Verified that the before and after generated configs are exactly the
same.

Which begs the question why update them? The answer is that it can be
confusing when the stored defconfig drifts too far from the generated
result.

Signed-off-by: Michael Ellerman