When compiling the KVM code for POWER with "make C=1", sparse complains about functions missing proper prototypes and a 64-bit constant missing the ULL prefix. Let's fix this by making the functions static or by including the proper header with the prototypes, and by appending a ULL prefix to the constant PPC_MPPE_ADDRESS_MASK. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
Add the asm ICSWX and ICSWEPX opcodes. Add definitions for the Coprocessor Request structures needed to use the icswx calls to coprocessors. Add icswx() function to perform the ICSWX asm using the provided Coprocessor Command Word value and Coprocessor Request Block structure. This is required for communication with the NX-842 coprocessor on a PowerNV system. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
Since we can now use hypervisor doorbells for host IPIs, this makes sure we clear the host IPI flag when taking a doorbell interrupt, and clears any pending doorbell IPI in pnv_smp_cpu_kill_self() (as we already do for IPIs sent via the XICS interrupt controller). Otherwise if there did happen to be a leftover pending doorbell interrupt for an offline CPU thread for any reason, it would prevent that thread from going into a power-saving mode; it would instead keep waking up because of the interrupt. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pull second batch of powerpc updates from Michael Ellerman: "The highlight is the series that reworks the idle management on powernv, which allows us to use deeper idle states on those machines. There's the fix from Anton for the "BUG at kernel/smpboot.c:134!" problem. An i2c driver for powernv. This is acked by Wolfram Sang, and he asked that we take it through the powerpc tree. A fix for audit from rgb at Red Hat, acked by Paul Moore who is one of the audit maintainers. A patch from Ben to export the symbol map of our OPAL firmware as a sysfs file, so that tools can use it. Also some CXL fixes, a couple of powerpc perf fixes, a fix for smt-enabled, and the patch to add __force to get_user() so we can use bitwise types" * tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Ignore smt-enabled on Power8 and later powerpc/uaccess: Allow get_user() with bitwise types powerpc/powernv: Expose OPAL firmware symbol map powernv/powerpc: Add winkle support for offline cpus powernv/cpuidle: Redesign idle states management powerpc/powernv: Enable Offline CPUs to enter deep idle states powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode i2c: Driver to expose PowerNV platform i2c busses powerpc: add little endian flag to syscall_get_arch() power/perf/hv-24x7: Use kmem_cache_free() instead of kfree powerpc/perf/hv-24x7: Use per-cpu page buffer cxl: Unmap MMIO regions when detaching a context cxl: Add timeout to process element commands cxl: Change contexts_lock to a mutex to fix sleep while atomic bug powerpc: Secondary CPUs must set cpu_callin_map after setting active and online
Winkle is a deep idle state supported in power8 chips. A core enters winkle when all the threads of the core enter winkle. In this state power supply to the entire chiplet i.e core, private L2 and private L3 is turned off. As a result it gives higher powersavings compared to sleep. But entering winkle results in a total hypervisor state loss. Hence the hypervisor context has to be preserved before entering winkle and restored upon wake up. Power-on Reset Engine (PORE) is a dedicated engine which is responsible for powering on the chiplet during wake up. It can be programmed to restore the register contests of a few specific registers. This patch uses PORE to restore register state wherever possible and uses stack to save and restore rest of the necessary registers. With hypervisor state restore things fall under three categories- per-core state, per-subcore state and per-thread state. To manage this, extend the infrastructure introduced for sleep. Mainly we add a paca variable subcore_sibling_mask. Using this and the core_idle_state we can distingush first thread in core and subcore. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add BPF extension SKF_AD_PKTTYPE to ppc JIT to load skb->pkt_type field. Before: [ 88.262622] test_bpf: #11 LD_IND_NET 86 97 99 PASS [ 88.265740] test_bpf: #12 LD_PKTTYPE 109 107 PASS After: [ 80.605964] test_bpf: #11 LD_IND_NET 44 40 39 PASS [ 80.607370] test_bpf: #12 LD_PKTTYPE 9 9 PASS CC: Alexei Starovoitov<alexei.starovoitov@gmail.com> CC: Michael Ellerman<mpe@ellerman.id.au> Cc: Matt Evans <matt@ozlabs.org> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> v2: Added test rusults Signed-off-by: David S. Miller <davem@davemloft.net>
Pull second round of KVM changes from Paolo Bonzini: "Here are the PPC and ARM changes for KVM, which I separated because they had small conflicts (respectively within KVM documentation, and with 3.16-rc changes). Since they were all within the subsystem, I took care of them. Stephen Rothwell reported some snags in PPC builds, but they are all fixed now; the latest linux-next report was clean. New features for ARM include: - KVM VGIC v2 emulation on GICv3 hardware - Big-Endian support for arm/arm64 (guest and host) - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list) And for PPC: - Book3S: Good number of LE host fixes, enable HV on LE - Book3S HV: Add in-guest debug support This release drops support for KVM on the PPC440. As a result, the PPC merge removes more lines than it adds. :) I also included an x86 change, since Davidlohr tied it to an independent bug report and the reporter quickly provided a Tested-by; there was no reason to wait for -rc2" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (122 commits) KVM: Move more code under CONFIG_HAVE_KVM_IRQFD KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use KVM: nVMX: Fix nested vmexit ack intr before load vmcs01 KVM: PPC: Enable IRQFD support for the XICS interrupt controller KVM: Give IRQFD its own separate enabling Kconfig option KVM: Move irq notifier implementation into eventfd.c KVM: Move all accesses to kvm::irq_routing into irqchip.c KVM: irqchip: Provide and use accessors for irq routing table KVM: Don't keep reference to irq routing table in irqfd struct KVM: PPC: drop duplicate tracepoint arm64: KVM: fix 64bit CP15 VM access for 32bit guests KVM: arm64: GICv3: mandate page-aligned GICV region arm64: KVM: GICv3: move system register access to msr_s/mrs_s KVM: PPC: PR: Handle FSCR feature deselects KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr KVM: PPC: Remove DCR handling KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Handle magic page in kvmppc_ld/st ...
The general idea is that each core will release all of its threads into the secondary thread startup code, which will eventually wait in the secondary core holding area, for the appropriate bit in the PACA to be set. The kick_cpu function pointer will set that bit in the PACA, and thus "release" the core/thread to boot. We also need to do a few things that U-Boot normally does for CPUs (like enable branch prediction). Signed-off-by: Andy Fleming <afleming@freescale.com> [scottwood@freescale.com: various changes, including only enabling threads if Linux wants to kick them] Signed-off-by: Scott Wood <scottwood@freescale.com>